[Help Thread] Puzzle Choice Thread

Rmazer said:
After one year of service to me, my very devoted F2 has started to decline over this month. I was thinking about getting a Lubix Ultimate GuHong. Will this be suitable for someone so used to the feel of the glorious F2?
Click to expand...

I used to use an FII, but then switched to a (normal) Guhong. It took a long time to get used to but I did.

Clayy9 said:
Is the Mefferts Pyraminx worth the extra $11 over the QJ Pyraminx?
Click to expand...

The QJ is faster, but locks up a bit more and the tips on the Mefferts are alot better.
 
Last edited:
Aleksandr said:
I think is LunHui! yes or no?
Click to expand...

It depends. What I've gathered from posts here, the GuHong would be the better choice for the general masses (ie. those that don't want to keep buying cubes until they find the one that suits them the most). It's a good all-round performer. The LunHui demands a more refined handling in order to prevent annoying lockups, but it has redeeming properties that exceed those of the GuHong. I prefer the LunHui over the GuHong but it did take a while longer to get used to the LunHui. The Guhong is really easy to get used to.
 
Last edited:
b4p4076 said:
It depends. What I've gathered from posts here, the GuHong would be the better choice for the general masses (ie. those that don't want to keep buying cubes until they find the one that suits them the most). It's a good all-round performer. The LunHui demands a more refined handling in order to prevent annoying lockups, but it has redeeming properties that exceed those of the GuHong. I prefer the LunHui over the GuHong but it did take a while longer to get used to the LunHui. The Guhong is really easy to get used to.
Click to expand...

Just got my lingyun - a real surprise. It corrected my perception that it is a popping cube - I believe it pops only for those who set tension loose.
I set it to where it is able to cut 35-40 deg. And it has yet to pop on me.
Its advantage over lunhui - it is lighter and with almost no lockups (doesnt mean lunhui locks up a lot).
Disadvantage? I can't really 'cut loose' for fear of pop explosion (as i would a lunhui).

For those who prefers tighter tension, get this cube before it disappears...just bear in mind - it is a cube in its own right, not a guhong-next-gen.
 
fiftyniner said:
Just got my lingyun - a real surprise. It corrected my perception that it is a popping cube - I believe it pops only for those who set tension loose.
I set it to where it is able to cut 35-40 deg. And it has yet to pop on me.
Its advantage over lunhui - it is lighter and with almost no lockups (doesnt mean lunhui locks up a lot).
Disadvantage? I can't really 'cut loose' for fear of pop explosion (as i would a lunhui).

For those who prefers tighter tension, get this cube before it disappears...just bear in mind - it is a cube in its own right, not a guhong-next-gen.
Click to expand...

Yeah, it's a really nice cube right?
Just cut loose and try to define its limits according to your style. Otherwise you'll just be holding yourself AND the cube back. It can actually take quite a beating before it pops, you'd be surprised. And it doesn't take long to put back together anyway...
 
antoineccantin said:
I would say no. My Lunhui is slow and locks-up.
Click to expand...

I had really bad lockups when I first tensioned my LunHui. They were so bad and frequent, that I was really wondering what DaYan was thinking when they approved the final design of the cube. After loosening it to what seems ridiculously loose, it locked up a lot less. The speed really went up too. Worth a try if you haven't already done so yet ;)
 
b4p4076 said:
After loosening it to what seems ridiculously loose, it locked up a lot less. The speed really went up too. Worth a try if you haven't already done so yet ;)
Click to expand...

Yeah- my lunhui is set ridiculously loose (would pop any other cube. lol). But those who are used to tighter tension will need to adjust their cubing style.

Anyway, I plan to order another lingyun before it disappears...
 
b4p4076 said:
I already have two, but I need to get at least 1 more DIY kit that I can stash somewhere. Just in case the two I have ever break ;)
Click to expand...

lol

I cut loose, and it exploded. Guess I am used to the lunhui.
I then took off the washer, lubed the springs+screws. Heck - its super fast right now despite tightening the tension almost to the max.
love it!
 
Ooops...
Yeah, I can't stress enough how important it is to lube under the screw-head and under the spring-base (or on the washers if they're in there). Would you mind trying to put the washers back in to see is it makes a speed difference though? Because removing the washers doesn't make a difference on mine :(
 
b4p4076 said:
Ooops...
Would you mind trying to put the washers back in to see is it makes a speed difference though? Because removing the washers doesn't make a difference on mine :(
Click to expand...

May try to put it back when I next clean the insides. I think it is all in the tension rather than the washers.
 
You must log in or register to reply here.

Similar threads

cranberryjuice
Puzzle Choice Help- 2x2, pyraminx, and 4x4
Replies
11
Views
1,540
cranberryjuice
cranberryjuice
Tony Fisher
My Twisty Puzzle quiz - 20 multiple choice questions
Replies
0
Views
587
Tony Fisher
Tony Fisher
Jteddy
Speedsliding 2026
Replies
8
Views
147
pi=3.14
pi=3.14
Puzzle Maniac
4-Pad Results Thread
Replies
3
Views
287
acrystal
acrystal
Puzzle Maniac
[OcR] Andrew Feng 34.53 5x5 Single
Replies
11
Views
515
Puzzle Maniac
Puzzle Maniac
Back
Top