[Help Thread] Puzzle Choice Thread

[Cubing Forever]

Bruh i use Warrior S too but 0% satisfaction because it doesn't corner ut even if you set it to loose tensions( Just get QIYi MS 3x3 or Meilong 3M

What? I got 45 degrees with factory tensions

 

[Kaneki Uchiha]

few questions I have

1) what cube is the best for me (rough turning), Valk 3 M, Valk Power M, MGC Elite, GTS3M or Tengyun V2M?

2) What's the GTS2M like, and is the WCA version the same?

3) Should I get a Little Magic Square-1 or a Wingy Skewb?

4) What's the best 2x2 on the market?

if you can get the wingy you probably can get the aoyan which is better and isnt that much more expensive

 

[PetraPine]

I would recommend the qiyi ms for rough turners,
or if you can just get a valk 3 m(not the elite its not that great)

 

[Cubing Forever]

What? I got 45 degrees with factory tensions

Doesn't really reverse corner cut tho

 

[PetrusQuber]

You are a tengyun fanboy and I would appreciate others' opinions

Dude just because I say Tengy V2 every time doesn’t make me a fanboy and you never asked for elaboration? And I have elaborated many times now to be honest. You just keep asking
Plus it’s the cube I have the most experience with if you ask somebody which cube is the best out of a range of similar range speed cubes, they will pick the one they have the most experience with.
And did you need to say that? Just wait for other opinions

 

[TheSlykrCubr]

Dude just because I say Tengy V2 every time doesn’t make me a fanboy and you never asked for elaboration? And I have elaborated many times now to be honest. You just keep asking
Plus it’s the cube I have the most experience with if you ask somebody which cube is the best out of a range of similar range speed cubes, they will pick the one they have the most experience with.
And did you need to say that? Just wait for other opinions

Doesn't mean i should pick mf3rs3 over rs3m 2020 when somebody asks what i think.

 

[Skewb_Cube]

Doesn't mean i should pick mf3rs3 over rs3m 2020 when somebody asks what i think.

Yeah, but I think he meant that there's no reason to called him a fanboy of some cubing brand because he uses and suggests those cubes. And also he was just suggesting a cube that you may like according to your turning style, and he probably suggest the tenyun because he has experience with it, for example, he won't suggest a cube that he just got instead of a cube that he knows how it performs.

 

[TheSlykrCubr]

Yeah, but I think he meant that there's no reason to called him a fanboy of some cubing brand because he uses and suggests those cubes. And also he was just suggesting a cube that you may like according to your turning style, and he probably suggest the tenyun because he has experience with it, for example, he won't suggest a cube that he just got instead of a cube that he knows how it performs.

Okay that's a fair point, and i now apologise.

Dude just because I say Tengy V2 every time doesn’t make me a fanboy and you never asked for elaboration? And I have elaborated many times now to be honest. You just keep asking
Plus it’s the cube I have the most experience with if you ask somebody which cube is the best out of a range of similar range speed cubes, they will pick the one they have the most experience with.
And did you need to say that? Just wait for other opinions

If the tengyun v2 wasn't an option, what should i get?

 

[Jam88]

which one would you guys say is better
Gan 251
MGC Elite
?

 

[zslane]

Do you hate the look/feel of matte plastic? If so, then you'd best avoid the GAN.

 

[PetrusQuber]

Okay that's a fair point, and i now apologise.


If the tengyun v2 wasn't an option, what should i get?

Valk 3 M imo tho I don’t have too much experience
Possibly GTS3M, but can’t you get a WRM 2020 with that money?

 

[PetraPine]

Valk 3 M imo tho I don’t have too much experience
Possibly GTS3M, but can’t you get a WRM 2020 with that money?

From what I heard the wrm is pretty bad for rough turning

 

[TheSlykrCubr]

Valk 3 M imo tho I don’t have too much experience
Possibly GTS3M, but can’t you get a WRM 2020 with that money?

I've heard that the RSM2020 is REALLY fast, and has light-ish magnets. maybe i could add some N35 magnets? I'd also like to try a ridged 3x3.

I would like to try a valk, since it sounds right for me.

 

[PetraPine]

Alot of people still use it today its a great option for someone like you, the og valk used to be my main when i had a simular turning style,
when my turning style became slower and more smooth i switched to the gan XS which i didnt realize at the time but i hated. than used the valk elite for a tiny bit but i also thought it was way to unstable very ¨strechy¨"feeling made the cube wierd and bad.
i NOW use the qiyi ms and it works for me,
but i might in the future buy the valk 3 M and rs3m and tries those again.

 

[Skewb_Cube]

Right now the only 4x4 that I have is the Yj Yusu V2 M and I want to replace it between the MGC 4x4 or the Moyu Aosu WR M so, which cube between them should I get? (Keeping in mind that I relay a bit on corner cutting)

I have being thinking to get the MGC because is a cheaper option and heard good things about it, but I wanted to hear opinions of people that have tried those cubes.

 

[Cubing5life]

Right now the only 4x4 that I have is the Yj Yusu V2 M and I want to replace it between the MGC 4x4 or the Moyu Aosu WR M so, which cube between them should I get? (Keeping in mind that I relay a bit on corner cutting)

I have being thinking to get the MGC because is a cheaper option and heard good things about it, but I wanted to hear opinions of people that have tried those cubes.

I'm quite happy with my worm, even though it pops pretty frequently if the tensions are too loose. But cornercutting and speed also work on tighter settings, so it doesn't really matter. Haven't tried the MGC (I only have 5 cubes, LOL), maybe someone who has tried it will reply...

 

[I'm A Cuber]

Right now the only 4x4 that I have is the Yj Yusu V2 M and I want to replace it between the MGC 4x4 or the Moyu Aosu WR M so, which cube between them should I get? (Keeping in mind that I relay a bit on corner cutting)

I have being thinking to get the MGC because is a cheaper option and heard good things about it, but I wanted to hear opinions of people that have tried those cubes.

So I got a MGC 4 for my little brother for his birthday which is tomorrow so I’ll tell you how it is whenever he opens it but shh don’t tell him

 

[SpeedyCube]

Right now the only 4x4 that I have is the Yj Yusu V2 M and I want to replace it between the MGC 4x4 or the Moyu Aosu WR M so, which cube between them should I get? (Keeping in mind that I relay a bit on corner cutting)

The Cubicle has the Moyu Aosu GTS M 4x4 on clearance this week, assuming they have some left. (Went from $36 to $12.) I ordered one, and it should be here by Monday!

To find the clearance section you have to scroll down to the footer bar at the very bottom. There’s a link there to their clearance page. Get one while they last!

EDIT: I took a second look and saw you want a different model. Sorry, I jumped the gun. Oh well, the model I referenced might work for you as well.

 

[Kade the cuber]

Can you name a cube to get which is magnetic under 10 dollars?

 

[Skewb_Cube]

Vote in poll.

From all of them I recommend the Moyu RS3 M because I heard good things about it and also the thunderclap v3 m because imo has good turning and corner cutting.