[Help Thread] Puzzle Choice Thread

[Nir1213]

I need a good cube,
The problem is that I do not want to buy a cube in
55$ like the gan m because I think it is too expensive...
What do you say about gan xs ?
Is there really a big difference between them?
Or maybe you have cheaper cube to give me.
Currently using the yuxin kylin v2 m

if you want budget cubes (0 - $15) try the meilong 3m, rs3m 2020, or guhong v4 m
for more expensive cubes (around 30 - 40) try gan x or gan xs, or gts2m or gts3m, wrm 2020 will work if you dont mind the weak magnets

also next time try to post in the Which Cube Should I Get? Up To Date Recommendations.

 

[AlmogIL]

I dont want budget cube,
i want the best cube i can get around 35-40 dollars.
The differences are big between the Xs And The gan 11 m ?

if you want budget cubes (0 - $15) try the meilong 3m, rs3m 2020, or guhong v4 m
for more expensive cubes (around 30 - 40) try gan x or gan xs, or gts2m or gts3m, wrm 2020 will work if you dont mind the weak magnets

also next time try to post in the Which Cube Should I Get? Up To Date Recommendations.

 

[SlowCuberNeedsHelp]

Hi! Please post cube recommendations for high tps, little to no lockups, good corner cutting. 'with magnets'

 

[abunickabhi]

I recommend the Moyu RS3M 2020 cube.

For more information, visit this thread, https://www.speedsolving.com/threads/which-cube-should-i-get-up-to-date-recommendations.70960/

Happy Cubing!

 

[nico_german_cuber]

I recommend the Moyu RS3M 2020 cube.

For more information, visit this thread, https://www.speedsolving.com/threads/which-cube-should-i-get-up-to-date-recommendations.70960/

Happy Cubing!

agreed. I have it and im very happy with it. It took a while to find the right setting tho but at all im happy with it

 

[abunickabhi]

Good to know, E R U' S2 U R U S2 U' R2 E'.

 

[RoundUpCubing]

my spoiled ass is gonna say gan 11

 

[ProStar]

I recommend the Dayan Guhong V4 over the Moyu RS3M2020

 

[Deleted member 55877]

I recommend the Dayan Guhong V4 over the Moyu RS3M2020

Yes!! The Guhong v4 is literally amazing.
- fast
- insane cornercutting
- no lockups, AT ALL
- perfect magnetic strength
- BUTTERY
- SMOOOOTH
- LIIIIGHT
- best cube 100%
- ONLY $15

 

[RoundUpCubing]

price is a notable difference tho, might wanna consider that too. not a big difference, but quite significant proportionally. could get a decent other budget cube alongside the rs3m if 15$ is your exact budget. really depends on your budget and what you want tho ¯\_(ツ)_/¯

 

[DNF_Cuber]

- fast
- insane cornercutting
- no lockups, AT ALL
- perfect magnetic strength
- BUTTERY
- SMOOOOTH
- LIIIIGHT
- best cube 100%
- ONLY $15

speed magic cuberspeed stickerless epic well very good roxenda magic suprercub3

 

[Deleted member 55877]

price is a notable difference tho, might wanna consider that too. not a big difference, but quite significant proportionally. could get a decent other budget cube alongside the rs3m if 15$ is your exact budget. really depends on your budget and what you want tho ¯\_(ツ)_/¯

The Guhong V4 is the best cube, better than the Gan 11 even if you don't care about price

 

[SH03L4C3]

As much as I love the RS3M and it is my main, I would not reccoment it for high TPS. Unfortunately the only cube I can think of is a GanCube. My favorite Gan cube is the 356 M because it is only $26. I cannot recomend the guhong v4 because the plastic is thin and it can break if you go fast on it according to someone else on this website.

GAN356 M Lite 3x3

The GAN 356 M Lite is a modern, mid-range magnetic 3x3 speed cube by popular manufacturer GAN. This version comes with GAN’s unique hand adjustable Numerical IPG Core and blue GES nuts installed. Out of the box, the GAN 356 M Lite has a fast, stable feel that is very reminiscent of a mix between...

www.thecubicle.com

 

[Deleted member 55877]

I cannot recomend the guhong v4 because the plastic is thin and it can break if you go fast on it according to someone else on this website.

I'm assuming you are referring to me saying that my guhong v4 broke. The reason why my guhong v4 broke is not the cube's fault, it was because I was pushing it really hard to make the all PLL's sub 1 video.

 

[SH03L4C3]

I'm assuming you are referring to me saying that my guhong v4 broke. The reason why my guhong v4 broke is not the cube's fault, it was because I was pushing it really hard to make the all PLL's sub 1 video.

Im pretty sure it wasnt you

 

[qwr]

Hi! Please post cube recommendations for high tps, little to no lockups, good corner cutting. 'with magnets'

pretty much any cube these days. seriously.

 

[Porcupine01]

I would recommend the GAN X

 

[Humble Cuber]

I would recommend the GAN X

Gan is extremely overated, especially for their hefty prices. Honestly budget cubes like the RS3M or Guhong V4 M are better than a gan XS. Not to say that GAN is producing bad cubes or anything like that, cause they do make great cubes (owning 3 of them). But I honestly feel it's not worth that huge price, considering cubes like Guhong V4 or rsm3 2020 can be just as good

 

[DNF_Cuber]

Gan is extremely overated, especially for their hefty prices. Honestly budget cubes like the RS3M or Guhong V4 M are better than a gan XS. Not to say that GAN is producing bad cubes or anything like that, cause they do make great cubes (owning 3 of them). But I honestly feel it's not worth that huge price, considering cubes like Guhong V4 or rsm3 2020 can be just as good

plus the X is kinda old

 

[SH03L4C3]

Ya problem is for going REALLY fast, gan is the only cube out thats good unfortunately. Not even MSCube according to the cubicle.
Whenever I spam too hard (Tryhard) on my RS3M sometimes an edge piece pops out. Its wierd. The Antipop mechanism stops it from fully popping but it is not properly in the cube. You have to stop and lightly push it back in which can be anooying in the middle of an algorithm. (RS3M is still my main.)