Dash Lambda
Veteran
Do you mean the internal edges in the middle layer which complete the lower block, or the internal edges that support the upper blocks?
[Help Thread] Disassembly and Assembly Thread
- Thread starter pdid
- Start date
latticeman
Member
The middle layer edge; so far, only managed to place the blocks in the first three layers, and am stuck at that point.
Dash Lambda
Veteran
I place those as I construct the block, rather than leaving it 'till the end. That makes everything stay together easier.
latticeman
Member
Hmm, I've tried almost everything at this point; looks like it may just stay apart at this rate, have been working on it for two days without success.
Felix Yang
Member
- Joined
- Jan 3, 2017
- Messages
- 1
My cyclone boys fangshi 2x2 popped, and I can't tell where certain pieces belong. Help???
cuber314159
Legend
I have a mofange 4*4 that is just in a box completely broken, as in no pieces put in place well, but all the pieces left intact, it has this really annoying center ring mechanism that makes it very hard to rebuild the first layer, how do I fix it.
Dash Lambda
Veteran
It's not broken, it's disassembled. There's a difference.
As for how to assemble it, CrazyBadCuber has a video on how to assemble a 4x4. He uses an AoSu, but the same principle applies to the WuQue. Hopefully that can help you.
cuber314159
Legend
Despite it not being a wuque thank you for the help I got it fixed and learnt that maybe the ring mechanism is not so stupid after all, I guess I'll have to find out how to fix shengshou 5*5*5s with snapped cores next
Dash Lambda
Veteran
It's not a WuQue? I thought the only MoFangGe 4x4 was the WuQue...
... But I guess I'm wrong, there's also the Sail and the Storm...
Anyway, glad it worked~
cuber314159
Legend
Oops just replied with nothing extra, thanks my 4x4 is fixed now I'm down to one broken cube,
shadowslice e
Legend
You know you can delete or edit your posts right?
cuber314159
Legend
Is it a cyclone boys or a fangshi, they're different brands. You just take one piece out at a time and then put it back in
until you find where the internal pop is then you put it back in
until you find where the internal pop is then you put it back in
dskids
Veteran
Any explanation you get here will be difficult to follow without pics or video. Just search 2x2 assembly on Youtube and you'll find something helpful.
trieu_pham22
Member
I recently popped it and now, it's in pieces... I'm already having trouble putting it back together. Is there any tips you guys have?
Karl Ferber
Member
- Joined
- Mar 3, 2017
- Messages
- 22
I picked up the WuQue yesterday and I found it sluggish. I did some break in solves, but then decided I should disassemble it. I cleaned all the pieces, but now I can't put it back together. Please help me!
P.S I already checked out some videos, but couldn't get the first step.
P.S I already checked out some videos, but couldn't get the first step.
SuperSlowCuber
Member
- Joined
- May 6, 2017
- Messages
- 2
I CANH HELP BUT HOW DU I CONTACT U
Ranzha
Friendly, Neighbourhoodly
- Joined
- Jul 24, 2009
- Messages
- 2,551
- Location
- Reno, Nevada, United States
- WCA ID
- 2009HARN01
- YouTube
- Visit Channel
In the future, title your threads more descriptively, or they may get deleted.
FJT97
Veteran
In addition:
This is great example for the one question one answer section of the forum.
On topic:
try to tape the pieces you've assembled to the core. Then they don't fall apart so easily.
Hello,
Had a blowout and some cubies fell off.
Have got them all back in except the last one - having a heck of a time forcing it back in - it forces the centre squares off before the tabs get in the slots.
Its a 4x4 Rubik brand not an Eastsheen or any other Japanese sounding name.
Intuitively something has to be loosened the black plastic tabs are far too big to easily pop-in like I have seen on the youtube videos. There is no way this last one will pop in that easily.
Ant hints please ? Or tips for things to search for on Google ?
Bill
Had a blowout and some cubies fell off.
Have got them all back in except the last one - having a heck of a time forcing it back in - it forces the centre squares off before the tabs get in the slots.
Its a 4x4 Rubik brand not an Eastsheen or any other Japanese sounding name.
Intuitively something has to be loosened the black plastic tabs are far too big to easily pop-in like I have seen on the youtube videos. There is no way this last one will pop in that easily.
Ant hints please ? Or tips for things to search for on Google ?
Bill
This seems to be a good video tutorial:
It seems that it's a lot easier if you completely unscrew one of the centres first.
If that doesn't work, I'm afraid most of us won't be able to help you, because we all use cubes from Chinese (not "Japanese"!) companies.
It seems that it's a lot easier if you completely unscrew one of the centres first.
If that doesn't work, I'm afraid most of us won't be able to help you, because we all use cubes from Chinese (not "Japanese"!) companies.
Similar threads
