[Help Thread] Disassembly and Assembly Thread

[PenguinsDontFly]

try playing with the tensions more, and if that doesnt work, disassemble and check out the hardware.

 

[TCG]

try playing with the tensions more, and if that doesnt work, disassemble and check out the hardware.

I did and i found out the catching problem; one of the edges keeps catching and twisting from its original position everytime i tried corner cutting. How do i deal with this?

 

[PenguinsDontFly]

I did and i found out the catching problem; one of the edges keeps catching and twisting from its original position everytime i tried corner cutting. How do i deal with this?

did you assemble the cube right? there are 3 special edges thet have to be placed beside eachother.

 

[TCG]

did you assemble the cube right? there are 3 special edges thet have to be placed beside eachother.

Im sure i did... Also the tensions keep tightening and loosening itself whats going on??
EDIT: one of the spring on my center went missing when the whole cube popped just now, that could be whats causing the problems.

 

[PenguinsDontFly]

Im sure i did... Also the tensions keep tightening and loosening itself whats going on??
EDIT: one of the spring on my center went missing when the whole cube popped just now, that could be whats causing the problems.

that was probably the problem yeah...

 

[latticeman]

Help Lubing and Assembling Yuxin 4x4

Hello,
I have been trying for 2 hours to lube the Yuxin 4x4, and have been unable to even get a single piece in without it falling apart. I am also trying to lube it with weight 4 of the cubicle lube. Does anyone have any advice on how I should go about reassembling it and applying the line? II am at my wit's end.

Thanks in advance!

 

[Abo]

I don't believe a yuxin 4x4 is that different than others, look up how to assemble 4x4, I think JRCuber did a vid on moyu 4x4 assembly, only help I can offer if it's still relevant

 

[RObKnight]

HELP with a popped 10x10x10

I recently popped two tiles on my 10x10x10. Does anyone know of some good videos or websites that might help me repair this cube? Is there anyone in the SF Bay area that I can turn to for help?
Rob Knight

 

[Themagicman03]

I recently popped two tiles on my 10x10x10. Does anyone know of some good videos or websites that might help me repair this cube? Is there anyone in the SF Bay area that I can turn to for help?
Rob Knight

I'm confused what you mean, can you please send pictures? I'm not sure if the tiles are colored tiles you put on the cube or pieces.

 

[Ordway Persyn]

I recently popped two tiles on my 10x10x10. Does anyone know of some good videos or websites that might help me repair this cube? Is there anyone in the SF Bay area that I can turn to for help?
Rob Knight

just push them back in, I'm not sure about 10x10 but there are assembly tutorials for other big cubes and it should be similar. A pic would be nice.

 

[RObKnight]

 

[RObKnight]

Here is a photo of the popped 10x10x10 cube.

 

[Ordway Persyn]

Here is a photo of the popped 10x10x10 cube.

View attachment 5722

Yeah just push them back in.

 

[Gabriel63]

How To Install New Springs

I am thinking of replacing the springs in my Yuxin with Maru Soft Springs, although I am unsure exactly how to do that. Any help would be appreciated.

 

[Abo]

It is quite simple, you take off the center caps, unscrew the screw, take off the spring and washer, replace with new spring, put washer back on, screw back in, and your done, just repeat for all other sides.

 

[guysensei1]

1) take out old springs
2) put in new springs

 

[Rhezner]

How to take apart congs design meiying.

I just got a Congs design Meiying. My first cube was some shengshou 3x3 and it is really easy to pull one of the edge pieces off and take the cube apart but I have no idea how to get this one apart, I have tried applying a decent bit of force but do not want to break anything so I will ask here. How do I get this thing apart to tension it?

 

[AlphaSheep]

I just got a Congs design Meiying. My first cube was some shengshou 3x3 and it is really easy to pull one of the edge pieces off and take the cube apart but I have no idea how to get this one apart, I have tried applying a decent bit of force but do not want to break anything so I will ask here. How do I get this thing apart to tension it?

Have you tried removing a centre cap and loosening the screw a few turns? Remember how much you turn it so you can restore your tensions after reassembling.

 

[notafastcuber]

YJ Guan Su 4x4 tutorial

Hello anyone who is looking at this,

I popped my Yj Guan Su 4x4 last night and have no idea how to put it back together. (The pop was a 1/4 of the cube. It wasn't the whole thing) I can assemble 3x3s no problem, but this 4x4 has me dumbfounded.
If anyone can link me to a video or a webpage on how to put it back together, I would greatly appreciate it.

Thanks

 

[asacuber]

Corner twisting a skewb

So I got my Qiyi skewb today, somebody messed with it and a corner is twisted and even if I take corner caps off(Only some get removed),I don't get Bowtie/Pi cases.
So how can I corner twist/remove all the corner caps?
E -Did it by disasssembly,but i would appreciate somebody telling me how to as it might be useful in the future