[Help Thread] Big Cubes Discussion

[Caleb/spooderskewb]

I’m really bad at big cubes the higher I get the worse I am. Pls give tips on how to do 6x6 and 7x7 in under 10 minutes 5x5 tips would also be nice too.

 

[Brady2335]

Learn commutators for the last centres on 6x6 and 7x7 and do freeslice. Also try learning r u variations for some of the harder OLLs and PLLs

 

[no-perm]

this may not be that related to this thread but should i get the cloud for my first 5x5?

 

[NewoMinx]

this may not be that related to this thread but should i get the cloud for my first 5x5?

Get the yuchuang v2 m or the little magic m

 

[NewoMinx]

I’m really bad at big cubes the higher I get the worse I am. Pls give tips on how to do 6x6 and 7x7 in under 10 minutes 5x5 tips would also be nice too.

Best thing to do is just do solves

 

[CornerCutter]

this may not be that related to this thread but should i get the cloud for my first 5x5?

If you are on a budget, the Yuxin Cloud is a great 5x5! If you have the money though I would recommend getting the Wushuang right away.

 

[One Wheel]

If you are on a budget, the Yuxin Cloud is a great 5x5! If you have the money though I would recommend getting the Wushuang right away.

The Yuxin Purple is also a great cube, better than the Wushuang, IMO.

 

[cuber314159]

this may not be that related to this thread but should i get the cloud for my first 5x5?

The aochuang GTSM is the best 5x5

 

[suteytooty]

Hope this is the right place to get some help but I've just learned to solve the 5x5 and I've done it to completion three times except every time I have two adjacent block of edges that are swapped. As it stands now in the top layer I have a green bar in the red side, red bar in the screen side and other side is complete. Is there a 5x5 alg to sort this? Thanks

 

[cuber314159]

Hope this is the right place to get some help but I've just learned to solve the 5x5 and I've done it to completion three times except every time I have two adjacent block of edges that are swapped. As it stands now in the top layer I have a green bar in the red side, red bar in the screen side and other side is complete. Is there a 5x5 alg to sort this? Thanks

Same as 4x4 parity

 

[One Wheel]

Hope this is the right place to get some help but I've just learned to solve the 5x5 and I've done it to completion three times except every time I have two adjacent block of edges that are swapped. As it stands now in the top layer I have a green bar in the red side, red bar in the screen side and other side is complete. Is there a 5x5 alg to sort this? Thanks

So like this, but on a 5x5? That’s a PLL parity that you can’t get on a properly assembled 5x5. I think you can switch the center caps around and resolve it, but I’m not 100% sure exactly how.

Edit: cycling 4 center caps by 1/4 turn will fix it.

 

[suteytooty]

Hope this is the right place to get some help but I've just learned to solve the 5x5 and I've done it to completion three times except every time I have two adjacent block of edges that are swapped. As it stands now in the top layer I have a green bar in the red side, red bar in the screen side and other side is complete. Is there a 5x5 alg to sort this? Thanks

Yeah exactly like that. Does that mean the cube wasn't set up right? Its not mega expensive - it's a Yuxin.

Will a parity alg sort it or will I have to pop the pieces out everytime I solve? Thanks for your help.

I'll try adjusting the centre caps a try again.

 

[One Wheel]

Yeah exactly like that. Does that mean the cube wasn't set up right? Its not mega expensive - it's a Yuxin.

Will a parity alg sort it or will I have to pop the pieces out everytime I solve? Thanks for your help.

Either disassemble the puzzle and reassemble it in a solved state, or take off four centers and cycle them by 1/4 turn (e.g. blue on white, white on green, green on yellow, yellow on blue) and re-solve. Either way once you get it to a fully solved state you won’t need to disassemble it to solve it, and there is no alg that will just switch two edges like that on a 5x5.

 

[suteytooty]

That worked a treat! Thanks!

 

[PEN.gu1nCXI]

The aochuang GTSM is the best 5x5

Just wondering, what are your thoughts on the Wushuang M?

 

[One Wheel]

Just wondering, what are your thoughts on the Wushuang M?

The Yuxin Purple is the best 5x5.

 

[PEN.gu1nCXI]

The Yuxin Purple is the best 5x5.

Do you mean this one: https://www.speedsolving.com/wiki/index.php/YuXin#YuXin_Purple_5x5 ?

 

[PEN.gu1nCXI]

Also, guys, I'm a noob at big cubes. Do you have any advice on how to be CN for the centers on a 4x4x4? I'm failing at the colour scheme right now. For example, I know that White and Yellow are opposite, Blue and Green are opposite, and Red and Orange are opposite. However, I don't know for instance where red should be relative to blue unless I have another solved cube for reference of the colour scheme. Any advice/techniques on how to grasp the colour scheme on a 4x4x4?

 

[One Wheel]

Also, guys, I'm a noob at big cubes. Do you have any advice on how to be CN for the centers on a 4x4x4? I'm failing at the colour scheme right now. For example, I know that White and Yellow are opposite, Blue and Green are opposite, and Red and Orange are opposite. However, I don't know for instance where red should be relative to blue unless I have another solved cube for reference of the colour scheme. Any advice/techniques on how to grasp the colour scheme on a 4x4x4?

1. Practice
2. Look for a corner when you are ready to start your fourth center that has two of the colors you’ve already solved on it: if you get the third one in the right place relative to those two, you’re good
3. What I do, which is not optimal. Keep opposites opposite (easy, like you say) and when you get to placing your first f2l pair look to see if it lines up. If it goes in properly you’re set. If only one side will line up then insert it so the R or L side matches and the F or B doesn’t, then do Uw2 Mw2 Uw2 Mw2 to quickly switch your F and B centers and cross edges. It’s a bit of a cheap trick, and costs me a second or two, but I’ve got bigger fish to fry at 1:25.

 

[PEN.gu1nCXI]

1. Practice
2. Look for a corner when you are ready to start your fourth center that has two of the colors you’ve already solved on it: if you get the third one in the right place relative to those two, you’re good
3. What I do, which is not optimal. Keep opposites opposite (easy, like you say) and when you get to placing your first f2l pair look to see if it lines up. If it goes in properly you’re set. If only one side will line up then insert it so the R or L side matches and the F or B doesn’t, then do Uw2 Mw2 Uw2 Mw2 to quickly switch your F and B centers and cross edges. It’s a bit of a cheap trick, and costs me a second or two, but I’ve got bigger fish to fry at 1:25.

I gave it a try and it works great. At least the first and second one does. I am quite new to the Yau method and haven't been practicing that much so I will take your first advice and start practicing. anyway, thank you for the advice. The colour scheme has been perplexing me a lot lately as I try to wrap my mind around the fact that a 4x4x4 has no center pieces. I should probably start practicing now. btw I do know how to solve the 5x5x5, as Redux 5 is more straightforward to me.