SH03L4C3
Veteran
today, I saw just playing with my X, and I accidentally left it disassembled with the fan on for about 2 hours, and it started to feel much better. Still not normal, but much much better.
[Help Thread] [OFFICIAL] Gan 356i discussion / software updates / issues report
- Thread starter Wish Lin
- Start date
qwr
Legend
very strange
DuckubingCuber347
Veteran
I find that if a cube is in a cold area, be that in front of a fan or air conditioning it performs really nice. I'm kind of tempted to stick my MS in the freezer for an hour.
SH03L4C3
Veteran
im gonna try that right now with my YLM, will report back later
Dear,Hello community,
I'm the proud owner of a Gan 356i v2. I’m also using v3.5 of Cube Station. My issue is all turns on my cube, apart from U’s and D’s, are out of sync with the app. Specifically, a right turn on my cube results in a back turn on the app. A left turn on my cube results in face turns on the app. Face turns on the cube results in right turns on the app and back turns on the cube result in left turns on the app.
I have tried the following:
resetting in the app
reinstalled app
Disconnect and reconnect cube
alignment option on connect and during training modes
Tried using the cube and app on other devices
Interestingly, I can sometimes get the general orientation of the cube to match the virtual display on the app (except in training mode), but the turns remain (except U's and D's) out of sync.
I added a few videos. Please help
Thanks for your feedback.
We suggest that you can reset your setting: top white and green front. And to see if it works.
This issue may be due to the formula practice disruption to the corresponding formula state function, the default tesseract orientation for the yellow top green front, so the rotation of the problem is not synchronized.
We will see how to optimize this issue. Sorry for inconvenience.
YiG
Member
Have you taken the cube apart recently to clean it?Hello community,
I'm the proud owner of a Gan 356i v2. I’m also using v3.5 of Cube Station. My issue is all turns on my cube, apart from U’s and D’s, are out of sync with the app. Specifically, a right turn on my cube results in a back turn on the app. A left turn on my cube results in face turns on the app. Face turns on the cube results in right turns on the app and back turns on the cube result in left turns on the app.
I have tried the following:
resetting in the app
reinstalled app
Disconnect and reconnect cube
alignment option on connect and during training modes
Tried using the cube and app on other devices
Interestingly, I can sometimes get the general orientation of the cube to match the virtual display on the app (except in training mode), but the turns remain (except U's and D's) out of sync.
I added a few videos. Please help
PetrusQuber
Legend
Tried that with my aolong during a period where it was getting worse (I cleaned out the lube).
I can neither confirm nor deny that it made a difference.
edit: wait, wouldn’t any water based lubes freeze?
CubeRed
Veteran
Science time!
SH03L4C3
Veteran
Update:
I accidentally left it in there for 3 hours, and here is what happened:
The cube was very cold and there was condensation on the plastic. No difference, other than the fact that the lube in the cube that made it gummy and controllable is gone. Maybe the freezer was too intense, I will try the refrigerator later.
Uneffective
I accidentally left it in there for 3 hours, and here is what happened:
The cube was very cold and there was condensation on the plastic. No difference, other than the fact that the lube in the cube that made it gummy and controllable is gone. Maybe the freezer was too intense, I will try the refrigerator later.
Uneffective
CFOP INC
Veteran
I put a rubiks 2x2 in a cup of water which went in the freezer.
DuckubingCuber347
Veteran
This is veering way off topic. There should be a thread for experiments like this.
Experiment Thread
This is the thread where we can discuss experiments that we think of and would like to test out. For example, how does coldness affect the performance of cubes? When does it feel the best? Room temperature, in front of a fan, or even fresh out of the freezer?
www.speedsolving.com
SH03L4C3
Veteran
I was trying to find that... thanks!This is veering way off topic. There should be a thread for experiments like this.
Experiment Thread
This is the thread where we can discuss experiments that we think of and would like to test out. For example, how does coldness affect the performance of cubes? When does it feel the best? Room temperature, in front of a fan, or even fresh out of the freezer?
Hi, could you take another video to see?@pppatty Many thanks for taking the time to respond-I appreciate it! You are correct, I now notice there is an inconsistency with the main cube orientation at start up and that of the cube image in the training sections. I did as you recommended-white top and green front-- and even tried some of the other orientations in the cube settings area you highlighted e.g. different tops and fronts. There is some progressthe mirror image of the cube in the training section is now correct at start up. However, unfortunately the turns are still out of sync. If I understand you correctly, is this likely a software issue?
@YiG thanks for chipping in-I have yet to venture inside of the cube-too worried I may break something.
Silverback
Regular
- Joined
- Nov 21, 2014
- Messages
- 55
I just came here, because I have the same problem. I have only 79% percent of my solves finished. That means, that around every fifth solve does not get recognized. The physical cube is solved, the one on the screen is not.
Cube is 356i V2, phone is Nokia 5.4, App is cube station downloaded from the gan website.
I get similar issues, when I use cubeast.
Maybe gan should track, how often people dnf and immediately solve reset via the cube manager.
Cube is 356i V2, phone is Nokia 5.4, App is cube station downloaded from the gan website.
I get similar issues, when I use cubeast.
Maybe gan should track, how often people dnf and immediately solve reset via the cube manager.
Eli Apperson
Veteran
Same thing happens with the I carry
Silverback
Regular
- Joined
- Nov 21, 2014
- Messages
- 55
I have a feeling, that it is the orange side, that causes the problems. I'm thinking about ways to collect more data to test this hypothesis. Has anybody experienced anything similar and does anyone know how to fix it?
Update: It is definitely the orange side. It doesn't always recognise the turns correctly. Still waiting for ideas to fix this. Other than switching to ZZ
Last edited:
Cube Station Official
Member
- Joined
- Jul 23, 2020
- Messages
- 23
17th Nov.2021
Dear All valued Users,
Thanks for your continuous support and help!!!
We have received some users' feedback that it's hard to load into the homepage, Update nee to wait a long time and the network always shows it unstable. All comments and feedbacks are valued.
We're fixing these issues all the time and now we're recruiting some volunteers who use android 11 or above to help us to test the fixed one.
Test period: End of Nov-Mid of Dec.
Test Content included:
1. Does Android 11 or above system users can able to download Cube Station from GooglePlay and use it normally?
2. Is the APP stable during use?
3. Is spending a long time on the loading page?
4. Does it return to the login page after the network is disconnected?
5. Other Network issues
PM me if you are interested to be our volunteers, helping us improve and creating a better Cube Station.
Thanks in advance.
Best,
GAN Service Team
Last edited:
YiG
Member
Recently bought an i3 cube, been great until this morning.. cube station showed battery level at around 90% when suddenly the cube on screen stopped moving, it was still showing as connected though. Tried restarting my tablet and the app, the cube showed up in the connection list but no light was coming from the cube. The i3 connected to the app but still showed no movement on screen. In the connection screen it showed a blank space where it would show the cube version and firmware version and if you try to hit the solve reset button it says reset failed. The battery level was now showing 5% but when I placed it in my power pod or the charging cradle it shows as battery full after a couple of minutes.
I have tried doing d20 on the various sides to disable and re-enable Bluetooth but that has no effect. Waiting to hear back from the place it was bought from..
Faulty i3
I have tried doing d20 on the various sides to disable and re-enable Bluetooth but that has no effect. Waiting to hear back from the place it was bought from..
Faulty i3
Last edited:
Similar threads
