[Help Thread] Puzzle Recommendations

[Deleted member 54663]

Yes, I feel that the Moyu Dual Adjustment system is superior to others because of its simplicity and effectiveness.

 

[Mo_A2244]

Yes, I feel that the Moyu Dual Adjustment system is superior to others because of its simplicity and effectiveness.

It's simple and it may actually be better than GAN's system. However, MoYu have (and probably will) improve their systems over time so I can't wait for that to happen.

 

[TheSlykrCubr]

It's simple and it may actually be better than GAN's system. However, MoYu have (and probably will) improve their systems over time so I can't wait for that to happen.

I think, if we're talking about spring compression systems, that the mgc elite is best at customisability. Sadly, the actual cube isn't as good as the others

 

[Robzy]

Hello, I will need a 2×2 which advise me you ?

 

[Deleted member 55157]

Hello, I will need a 2×2 which advise me you ?

Qiyi MS or mgc if you can spend a little bit more.

 

[Robzy]

Qiyi MS or mgc if you can spend a little bit more.

Mgc or mgc elite?

 

[Deleted member 55157]

Mgc or mgc elite?

Both are really good. The elite might be a little bit better but it is more expensive.

 

[TheSlykrCubr]

ok what best for oh

guhong v3 m

wuwei m

tengyun v1



also i want a good 3x3 but my valk elite broke and budget is smaller

should i get (please give your recommendation and describe the one's you've tried)

gts2m wca

valk m

valk power m

tengyun v2

gts3m

wrm

wrm 2020





arigatou gozaimasu

 

[Deleted member 54663]

ok what best for oh

guhong v3 m

wuwei m

tengyun v1



also i want a good 3x3 but my valk elite broke and budget is smaller

should i get (please give your recommendation and describe the one's you've tried)

gts2m wca

valk m

valk power m

tengyun v2

gts3m

wrm

wrm 2020





arigatou gozaimasu

I used to main the valk, and now main the WRM 2020, so that is my recommendation. and for oh I just use the same cube as my 2 handed main, but jperm used the wuwei m I think, and the tengyun is very smooth.

 

[swburk]

ok what best for oh

guhong v3 m

wuwei m

tengyun v1



also i want a good 3x3 but my valk elite broke and budget is smaller

should i get (please give your recommendation and describe the one's you've tried)

gts2m wca

valk m

valk power m

tengyun v2

gts3m

wrm

wrm 2020





arigatou gozaimasu

For OH: I don't have a WuWei, but I much prefer the Tengyun V1 to the GuHong V3. If you have small hands or really struggle with normal-sized cubes for OH, get the GuHong, but otherwise, get the Tengyun. It's much faster and smoother, and I think the magnets are just right. The GuHong turns and corner-cuts well when testing it, but when I'm actually solving, it feels blocky and strange.

Of the other cubes you listed as candidates, I only have the Tengyun V2 and the WRM 2020. I really like both, but I prefer the WRM 2020. It's lighter and a bit faster and, for me, was easier to set up. I think it also works well as a OH cube, although the magnets are a little stronger than I'd prefer for that.

 

[TheSlykrCubr]

For OH: I don't have a WuWei, but I much prefer the Tengyun V1 to the GuHong V3. If you have small hands or really struggle with normal-sized cubes for OH, get the GuHong, but otherwise, get the Tengyun. It's much faster and smoother, and I think the magnets are just right. The GuHong turns and corner-cuts well when testing it, but when I'm actually solving, it feels blocky and strange.

Of the other cubes you listed as candidates, I only have the Tengyun V2 and the WRM 2020. I really like both, but I prefer the WRM 2020. It's lighter and a bit faster and, for me, was easier to set up. I think it also works well as a OH cube, although the magnets are a little stronger than I'd prefer for that.

ok. how would you describe the tengyun v2?


also, fixed my valk elite, but i still wanna try new cubes

 

[RiSha]

i recomend max mgc 5 just got 1:35 sooo....

 

[RiSha]

Both are really good. The elite might be a little bit better but it is more expensive.

mgc elite is wayyyyyyyyyyy better though twice the price but still worth it

 

[swburk]

ok. how would you describe the tengyun v2?


also, fixed my valk elite, but i still wanna try new cubes

Glad you were able to fix your Valk!

I would describe the Tengyun V2 as a pretty well balanced cube. It's a little heavier than I like, very fast and smooth. Compared to the Tengyun V1, the turning is a bit more tactile, which is nice. It's also more stable in my experience. Given the wide amount of customization options, I think pretty much anyone could make it work for them. I keep the tensions at 0, the elasticity at 0.6, and the magnets at 2.

 

[TheSlykrCubr]

Glad you were able to fix your Valk!

I would describe the Tengyun V2 as a pretty well balanced cube. It's a little heavier than I like, very fast and smooth. Compared to the Tengyun V1, the turning is a bit more tactile, which is nice. It's also more stable in my experience. Given the wide amount of customization options, I think pretty much anyone could make it work for them. I keep the tensions at 0, the elasticity at 0.6, and the magnets at 2.

that actually sounds like it could work for me. what's the corner cutting/ catching like?

 

[BenChristman1]

that actually sounds like it could work for me. what's the corner cutting/ catching like?

I have my Tengyun v2 on the tightest possible settings, and it still cuts 45 with ease. Unless you try to cut more than that, you’re not going to get very many lockups. As for reverse corner cutting, it’s pretty average, and it feels very snappy, which I enjoy, but you might not.

 

[TheSlykrCubr]

I have my Tengyun v2 on the tightest possible settings, and it still cuts 45 with ease. Unless you try to cut more than that, you’re not going to get very many lockups. As for reverse corner cutting, it’s pretty average, and it feels very snappy, which I enjoy, but you might not.

i don't think that'll bother me

on my birthday, imma order a good oh cube, some dnm, dignitas and either the tengyun v2 or the regular valk m. maybe also a shengshou clock + valk 2, if i have enough.


would have enough money for more, but i'm buying guitar hero: metallica, a guitar controller and a drum kit as well sooooooo, yea







(wanting the shengshou over the qiyi just cause it's also magnetic and much cheaper. Also, i'll set it up well to make it pretty viable)

 

[IisCuber]

I want to get into 5X5,4X4,2X2, and Skeby(sorry I can not spell).Anyone know any cheap but good ones.

 

[TheSlykrCubr]

I want to get into 5X5,4X4,2X2, and Skeby(sorry I can not spell).Anyone know any cheap but good ones.

2x2 = YuPo V2M
4x4 = MGC
5x5 = MGC
Skewb = Little Magic

 

[Deleted member 55157]

I want to get into 5X5,4X4,2X2, and Skeby(sorry I can not spell).Anyone know any cheap but good ones.

2x2: Qiyi ms or mgc
4x4: Meilong M
5x5: Little magic M or mgc
Skewb: Cyclone boys.