Upcoming puzzles

Haven't heard of an XMan V or V2 but I think it's an xman cube. Going off topic but.. Any vague ideas on what the GAN 11 M Pro price will be around? It'll be interesting to see GAN competing with other flagships....

Would it be around the $50 - $60 mark or are some of the versions going to be "budget" seeing as though there is going to be 4 or 3 versions of it right?
 
Mo_A2244 said:
Haven't heard of an XMan V or V2 but I think it's an xman cube. Going off topic but.. Any vague ideas on what the GAN 11 M Pro price will be around? It'll be interesting to see GAN competing with other flagships....

Would it be around the $50 - $60 mark or are some of the versions going to be "budget" seeing as though there is going to be 4 or 3 versions of it right?
Click to expand...
It should be about the price of around 70 dollars. First of all, since there are less magnets, it should cost less. Second it has primary plastic, so maybe higher? 3rd it has adjustable corner magnets, I don't know how they are going to pull that off, and 4th, it's GAN
 
Yes, It is probably a Xman v2, not a Valk 6. This video was retrospecting upcoming cubes, so I'll make sure to write that its (probably) not the valk 6 in the description.
 
GAN 11 M Pro available at DailyPuzzles:
www.dailypuzzles.com.au

GAN 11 M Pro 3x3 Magnetic Speed Cube

The GAN 11 M Pro is a combination of years of expertise in research and development and new advances in modern cubing technology to deliver one of the most advanced 3x3s of all time. Featuring a brand new innovative core magnetic positioning system gives this puzzle a more stable and precise...
www.dailypuzzles.com.au
$94-$104 AUD
$66.90-$74 USD
 
rubik2005 said:
GAN 11 M Pro available at DailyPuzzles:
www.dailypuzzles.com.au

GAN 11 M Pro 3x3 Magnetic Speed Cube

The GAN 11 M Pro is a combination of years of expertise in research and development and new advances in modern cubing technology to deliver one of the most advanced 3x3s of all time. Featuring a brand new innovative core magnetic positioning system gives this puzzle a more stable and precise...
www.dailypuzzles.com.au
$94-$104 AUD
$66.90-$74 USD
Click to expand...

An expected price. We'll likely see a lot of this tech travel down into their mid-range and budget cubes throughout the next year.
 
If you spam the primary internals and black internals button at the same time on a phone until it lags, it will lower the price of the cube. (just a visual glitch you can’t actually buy it)
 

Attachments

  • 4BEA8F03-3786-4C4E-8426-0823769398D9.jpeg
    4BEA8F03-3786-4C4E-8426-0823769398D9.jpeg
    225.8 KB · Views: 37
Zain_A24 said:
An expected price. We'll likely see a lot of this tech travel down into their mid-range and budget cubes throughout the next year.
Click to expand...
I would be happy if this happened, but I doubt it because of what happened about the valk elite. The center-edge magnets were very nice, and had a good bump, but no other cubes used this mech(i think)
 
cuber314159 said:
Repulsion? Surely you don't want magnets to repel each other in a cube? This sounds like something thecubicle would do for April fools Day...

Or it could just be a bad name decision, we've had a few of those recently.
Click to expand...

What if repulsion reduces friction between pieces so it is smoother? Still seems illogical but could be a new concept
 
  • Like
Reactions: qwr
cuber314159 said:
Repulsion? Surely you don't want magnets to repel each other in a cube?
Click to expand...
Here's a random observation: in the Valk Elite, the magnet polarities are actually set up so that if the centre-edge and corner-edge magnets were at the same radius (they're not, but imagine if they were), they would actually be repelling each other when a layer is turned 45°: there'd be an energy minimum when the layer is fully aligned and an energy maximum when the layer is maximally misaligned. In reality, the radii are too different and the magnetic repulsion is too weak to be relevant.

Still, something to think about.
 
more speculation: modern flagship cubes have only one spot they can't cornercut so if the repulsion magnets prevent the layer from reaching that spot then in theory the cube doesn't lockup as much.

However imo the snappiness of corner cutting is more important than that one spot that is almost never an issue.

PingPongCuber said:
What if repulsion reduces friction between pieces so it is smoother? Still seems illogical but could be a new concept
Click to expand...
This is an interesting idea. Floating magnets like a maglev. If cubers are looking for a unique feel then that would certainly be unique. If any cube designers are reading this, please try it. @cyoubx lol
 
PingPongCuber said:
What if repulsion reduces friction between pieces so it is smoother? Still seems illogical but could be a new concept
Click to expand...
Hmmm I had the same thought. And if you pair the reduced friction of magnets that repel with with the stability of corner/core magnets we might on to something, whether good or bad...

Although, judging from TheCubicle’s video this cube does look like the repulsion is more for helping you stay out of a 45 degree state, where it is more difficult to corner cut.
 
  • Like
Reactions: qwr
In June, The Cubicle and sCs made a video with a Yj Mini Yulong 3x3 M, so this may be it but with a different name, and probably cheap because it's Yj.


 
Skewb_Cube said:
In June, The Cubicle and sCs made a video with a Yj Mini Yulong 3x3 M, so this may be it but with a different name, and probably cheap because it's Yj.


Click to expand...

Has this puzzle been released? I couldn't find it on the Cubicle's or SCS's website.
 
You must log in or register to reply here.

Similar threads

Fukuoka Kengo James
  • Sticky
Upcoming non-WCA puzzles
3 4 5
Replies
86
Views
15,568
cuber314159
cuber314159
speedcubingworld.com
Is anybody going to an upcoming southeast (U.S) competition?
Replies
2
Views
511
speedcubingworld.com
speedcubingworld.com
abunickabhi
Organize more upcoming spectator friendly competitions like All Stars
Replies
14
Views
2,654
abunickabhi
abunickabhi
Turns_And_Twists2024
PNW accomplishment / upcoming comps thread
Replies
9
Views
1,777
Turns_And_Twists2024
Turns_And_Twists2024
One Wheel
  • Sticky
Upcoming 3x3s
22 23 24
Replies
478
Views
48,464
Michael Wimberly
Michael Wimberly
Back
Top