TheCubicle.us - High Quality Puzzles, Custom-Cut Stickers, Premium Lubricants & More!

[kcl]

why are the applications public?



I actually prefer having to use as few steps as possible when ordering from a webstore

They were public the old way of doing it also.

 

[a cool guy]

TheCubicle.us is looking for 5 testers for the MoYu AoLong 3x3! Testers will also be allowed to select one set of 3x3 stickers for the cube (57mm FangShi cut recommended). Testers are required to post an unboxing and review video of the MoYu AoLong on their YouTube Channels. The 5 testers shall be selected at the sole discretion of TheCubicle.us.

This application will be open from April 26th to May 9th. If you purchase a MoYu AoLong 3x3 from us and are later selected as a tester, you may request a refund if you don't want to receive 2.

Please note that applicants are not permitted to test for more than 1 store. If you are selected as a tester for TheCubicle.us and another store, you may only accept one of those offers.

Please visit this Google Docs Form to apply (do not post here): https://docs.google.com/forms/d/10g7tQdomT2P1x51G2-VJE0wD7DFRXtLA2Jtz0q7YZrM/viewform

Thanks for reading!

Just a little something I noticed about your Moyu cut stickers...
They don't fit the Weilong perfectly. The weilong corner has a straight cut, but the sticker has a curved cut. I think Dayan corner stickers would work better in this case.

One more thing, would it be possible for custom colour schemes to be shown in the cart as a single set rather than separate stickers? They get rather messy if you have many things in the cart.

Thanks for pointing that out Frankly, I didn't even notice it before. The MoYu cut stickers were originally designed for the MoYu HuanYing, which does have a rounded corner. I guess when the WeiLong came along, we just figured it was the same or similar enough to use the same design. However, we don't think we will change the recommended stickers to 57mm - DaYan for the MoYu WeiLong at this time. The WeiLong corner is straight, but it has a curve leading into the straight part, so there's some reason for using a curved cut there. Some customers might think the sharp corner is too jarring in contrast with the half-rounded corner, too. It all depends on preference -- I'm sure the 57mm DaYan cut stickers would work just great for the WeiLong if you prefer the straight cut on the corners

As for the stickers showing as single sets in the cart -- it's certainly possible, but it will take some time to test and develop. We have already added a new feature to the cart that sorts all of the stickers by color and type (not sure if you saw that already), which we think is already a huge leap forward compared to the old way of just showing all of the stickers in a huge list. Condensing those stickers into single line items is taking it one step further -- we'll definitely experiment with it in the coming weeks and see if we can release it.

why are the applications public?

I actually prefer having to use as few steps as possible when ordering from a webstore

Applications for the last tester selection program (for the MoYu LiYing) were held here, and we agreed with some of the posters that it was causing too much clutter on this thread by drowning out the important news, so we decided to hold it on Google Drive Form instead. Since anyone with the link can enter, it is a bit less secure, but we can always remove entries that look suspicious. Also, it was stated on the application form that all entries will be made public. This is to help make the process similar to the way it would be if it were held on this thread (everyone can see each others applications).

Yes, there's pros and cons to shorter checkouts, and the one page checkout is popular these days, but we eventually decided against it. There's merits to both checkout styles, and we just decided to go with the 4-step process we have now. Thanks for the feedback, we'll consider changing it in the future though

 

[NewCube1]

I want to test one of this. I know i am not the best choice and i am not famous on Youtube.I know i was a noob,but i can also do an Italian and English review.I can post my review here and on speedcubing.it, the italian's speedcubing forum. Thanks.

Name : Tommy Hu
Wca ID: 2014HUTO01
Nationality: China ( but i represent Italy )
Email: [email protected]

 

[kcl]

I want to test one of this. I know i am not the best choice and i am not famous on Youtube.I know i was a noob,but i can also do an Italian and English review.I can post my review here and on speedcubing.it, the italian's speedcubing forum. Thanks.

Name : Tommy Hu
Wca ID: 2014HUTO01
Nationality: China ( but i represent Italy )
Email: [email protected]

Read the post above.

 

[NewCube1]

Read the post above.

Sorry, but i don't speak English very well.Could you explain me ? Thanks.

 

[antoineccantin]

Please visit this Google Docs Form to apply (do not post here): https://docs.google.com/forms/d/10g7...7YZrM/viewform

This link does not work.

 

[Mikel]

This link does not work.

It doesn't work for me either.

 

[Genius4Jesus]

This link does not work.

I had the same problem. So, I used the link from a cool guy's other post, which is on the bottom of page 130.

That theoretically* will fix the problem.

 

[Michael Womack]

Good thing I got my application in before the link stopped working.

 

[Maximilian Tran]

I would like to be a tester of the Moyu Aolong but I don't have a youtube channel. sorry

 

[a cool guy]

Sorry about that -- the link didn't copy over properly from my original post on page 130. As a reminder, please do not post applications here, as they will not be considered. Please submit using the form in the provided link below. Here's a copy of the message again with the appropriate link:

TheCubicle.us is looking for 5 testers for the MoYu AoLong 3x3! Testers will also be allowed to select one set of 3x3 stickers for the cube (57mm FangShi cut recommended). Testers are required to post an unboxing and review video of the MoYu AoLong on their YouTube Channels. The 5 testers shall be selected at the sole discretion of TheCubicle.us.

This application will be open from April 26th to May 9th. If you purchase a MoYu AoLong 3x3 from us and are later selected as a tester, you may request a refund if you don't want to receive 2.

Please note that applicants are not permitted to test for more than 1 store. If you are selected as a tester for TheCubicle.us and another store, you may only accept one of those offers.

Please visit this Google Docs Form to apply (do not post here): https://docs.google.com/forms/d/10g7tQdomT2P1x51G2-VJE0wD7DFRXtLA2Jtz0q7YZrM/viewform

Thanks for reading!

 

[Carrot]

Applications for the last tester selection program (for the MoYu LiYing) were held here, and we agreed with some of the posters that it was causing too much clutter on this thread by drowning out the important news, so we decided to hold it on Google Drive Form instead. Since anyone with the link can enter, it is a bit less secure, but we can always remove entries that look suspicious. Also, it was stated on the application form that all entries will be made public. This is to help make the process similar to the way it would be if it were held on this thread (everyone can see each others applications).

Yes, there's pros and cons to shorter checkouts, and the one page checkout is popular these days, but we eventually decided against it. There's merits to both checkout styles, and we just decided to go with the 4-step process we have now. Thanks for the feedback, we'll consider changing it in the future though

They were public the old way of doing it also.

Well, I don't mind at all, I just thought maybe you used google docs to hide emails/applicants, so long answer short: you solely moved to google docs for reducing spam in this thread.

 

[ComputerGuy365]

Sent my form

 

[WinterCub3r]

dang, wish i had a youtube cahnnel.

 

[guysensei1]

Are you going to stock the new gans core? Those look promising.

 

[a cool guy]

Are you going to stock the new gans core? Those look promising.

Yep, we are working on getting the new cores. Should have them in stock soon!

 

[a cool guy]

Cubicle Stickers for the YuXin 11x11 are now available in over 40 shades! As always, they are spaced for application tape to save you the trouble of applying 726 stickers individually.

Stickers may be purchased here: http://thecubicle.us/11x11-sticker-picker-137mm-c-66_156.html

 

[a cool guy]

Thanks everyone for participating in our tester selection process for the MoYu AoLong. Just a quick update: since we are expecting to have the AoLong in stock by Thursday or Friday this week, we will notify the selected testers Wednesday evening, which is about 2 days earlier than previously stated.

Also, if you use Instagram -- TheCubicle.us now has an account on Instagram! Our username is @thecubicle.us, and we will be frequently posting pictures of our latest products there.

 

[a cool guy]

The MoYu AoLong is here! Turns very smoothly right out of the box, and features excellent corner cutting.

Link: http://thecubicle.us/moyu-aolong-p-2757.html

Thanks for participating in our MoYu AoLong Tester applications. We will begin reviewing the applications and notify the 5 testers soon.

 

[Michael Womack]

I can't wait to see who got picked for the Aolong. Also how possible for you all sell stickers for the 30mm keychain cubes?