TheCubicle.us - High Quality Puzzles, Custom-Cut Stickers, Premium Lubricants & More!

[gateway cuber]

Am I the only person that thinks the Cubicle should make the premium meying again? Because if you ask me the single best cube out there right now is the Valk 3 (I haven't tried a gts M tho...) and the premium meiying (did) makes a very close second. This cube would be my OH main if I could get my hands on one and I'm sure it'd many people 2H main if it were brought back. Why was it discontinued in the first place?

 

[4Chan]

Am I the only person that thinks the Cubicle should make the premium meying again? Because if you ask me the single best cube out there right now is the Valk 3 (I haven't tried a gts M tho...) and the premium meiying (did) makes a very close second. This cube would be my OH main if I could get my hands on one and I'm sure it'd many people 2H main if it were brought back. Why was it discontinued in the first place?

It was discontinued because more modern cubes came along, and people shifted to other cubes.

Keep posted! We will soon have something that will meet your need!

 

[biscuit]

Am I the only person that thinks the Cubicle should make the premium meying again? Because if you ask me the single best cube out there right now is the Valk 3 (I haven't tried a gts M tho...) and the premium meiying (did) makes a very close second. This cube would be my OH main if I could get my hands on one and I'm sure it'd many people 2H main if it were brought back. Why was it discontinued in the first place?

Chris said they'd take custom orders eventually.

 

[4Chan]

Yep! Since the news is out, soon we will be able to do FULLY custom orders!
Soon, Chris Olson will be releasing a video about his magnetic 2x2, as an example of our custom orders!

Spring swaps, mods, plastic cutting, drilling, magnetisation, stickers, etc etc.
All you'll have to do is email [email protected], and we will get back to you with an invoice based on how long your order will be. If you want an older premium, then we can make one for you!

So hypothetically, if you wanted a fully sanded 7x7 with full magnetic layers, as long as you are willing to pay for the puzzle and an hourly rate of labour, we can do almost anything for you. Essentially, if you want any puzzle as a premium, you can have it!

 

[One Wheel]

Do you have a rough rule of thumb as to how much higher-order magnetic might be expected to cost? I know they're out of my price range, as I'm still trying to decide whether my next purchase will be an Aolong v2 or an Aofu, or maybe a gigaminx, but I'm curious.

 

[4Chan]

Yes! I do. The prices have been worked out.

So you'll pay for puzzle and materials, a base cost which includes stickering/tensioning/lubrication, and an hourly rate based on how long it will take to service. ($15 per hour)

So a magnetic 5x5 would be around $70-80.
Magnetic 2x2 will be approximately $40, depending on which 2x2 you choose.
One thing to note is that magnetic 4x4s will be only a little less than a 5x5, due to the inner topology of the edge orbits.
In order to compensate for parity errors flipping the polarity, Cubicle Labs magnetic 4x4s use a special pattern of magnets which produce a consistent magnetic feedback regardless of parity. However, this requires an additional step of work, and many more magnets.

 

[gateway cuber]

Yep! Since the news is out, soon we will be able to do FULLY custom orders!
Soon, Chris Olson will be releasing a video about his magnetic 2x2, as an example of our custom orders!

Spring swaps, mods, plastic cutting, drilling, magnetisation, stickers, etc etc.
All you'll have to do is email [email protected], and we will get back to you with an invoice based on how long your order will be. If you want an older premium, then we can make one for you!

So hypothetically, if you wanted a fully sanded 7x7 with full magnetic layers, as long as you are willing to pay for the puzzle and an hourly rate of labour, we can do almost anything for you. Essentially, if you want any puzzle as a premium, you can have it!

oooohhhh yeah boys...

so how much would each of these cost?
Premium Meying
Valk 3 M (without premium lubing stuff)
Yuxin Blue M (again non-premium)
Premium Moyu Magnetic Pyra

Edit: also non premium Magnetic Yue Hun, how much would that cost?

 

[4Chan]

For the Premium Meiying, you should expect a price approximate to the old premium price. However, keep in mind that the cost may be slightly higher because the calculations for pricing are slightly different for these puzzles.

For a non-premium magnetic puzzle, you would save around $8 from the total, which would not be a large margin. ($42 vs $50)
However, since these are custom to your liking, we are willing to provide a magnetic puzzle without the trimmings.

 

[gateway cuber]

How much would no trimmings shave off?
and the Pyra?

 

[4Chan]

The trimmings mean the premium service, and premium service will depend on the puzzle.

Service for the Pyra will be approximately $7, according to the way the cost is calculated currently.

 

[gateway cuber]

oh, sorry I thought trimming was something you did to the magnetic cubes .

Ok, good to know, I definitely considering that Premium Pyra (Could rowe like take out a magnet from the tips to make them less terrible? I heard that's what drew brads did to his.) And just to be sure I've got this down...
Premium Pyra Approx. $23
Magnetic Yue hun (non-premium) approx. $32?
Premium Meying approx $25?
non premium magnetic 3x3s approx $42 (would a cheaper 3x3 like a yuxin be like $38 instead?)
sorry about all the questions I'm just really excited about this...

 

[4Chan]

Yes, those are pretty good approximations.
We have spreadsheet calculations, and those will more accurately compute the totals.

Currently, to make a Full Custom order, email your request to [email protected] !

 

[gateway cuber]

Ok thanks! I'm definitely gonna start saving up for these puzzles!

 

[biscuit]

Yep! Since the news is out, soon we will be able to do FULLY custom orders!
Soon, Chris Olson will be releasing a video about his magnetic 2x2, as an example of our custom orders!

You do realize you mentioned this in the Cubicle Labs thread right?

 

[WACWCA]

Yep! Since the news is out, soon we will be able to do FULLY custom orders!
Soon, Chris Olson will be releasing a video about his magnetic 2x2, as an example of our custom orders!

Spring swaps, mods, plastic cutting, drilling, magnetisation, stickers, etc etc.
All you'll have to do is email [email protected], and we will get back to you with an invoice based on how long your order will be. If you want an older premium, then we can make one for you!

So hypothetically, if you wanted a fully sanded 7x7 with full magnetic layers, as long as you are willing to pay for the puzzle and an hourly rate of labour, we can do almost anything for you. Essentially, if you want any puzzle as a premium, you can have it!

What 2x2 is it?

 

[4Chan]

You do realize you mentioned this in the Cubicle Labs thread right?

Oops! So THATS how you found out!
We only formalized the numbers this week!

What 2x2 is it?

He wanted a YueHun, so I made a black one with his colour scheme on it for him.
It was pretty nice!

 

[Rcuber123]

How much would a YueHun M like Chris has cost?

 

[4Chan]

How much would a YueHun M like Chris has cost?

It would be $35.95 for all customers in the United States, since it'd qualify for free shipping!
However, if international, we will have to charge shipping cost.

This includes the premium tensioning, sticker selection, plastic colour selection, premium lubrication, and magnetisation (48 magnets).

 

[Rcuber123]

It would be $35.95 for all customers in the United States, since it'd qualify for free shipping!
However, if international, we will have to charge shipping cost.

This includes the premium tensioning, sticker selection, plastic selection, premium lubrication, and magnetisation (48 magnets).

Hmm might sell some cubes to buy this

 

[Meow]

plastic selection

what do you mean by plastic selection? sorry if that's a dumb question