[Help Thread] Spring noise

My A-V does that and so does my store-bought. If you put just a little bit of lube on the springs it might stop the noise.

Don't do that, because Jig-a-Loo and other lubricants
can fuse the springs to the centers' plastic, like what
happened to my friend's Type-C.

All cubes from speedcubeshop.com will come lubricated with Lubix. Everything that touches something else will come lubricated including the screws and springs.

To add my thoughts to this cube's review:

I disassembled the Guhong, unscrewed the centers from the core, and went to town, lubing every contact point that could be made inside the core. I applied Lubix to the inner base of the center piece, where the washer sits. Lubed on top of the washer where the spring sits. The top lip of the screw where the other side of the screw rubs. The inner wall lip where the screw bottoms out at when you pull out on the core.


Also know, that SpeedCubeShop and I have partnered up, and I am going to be pre-lubing every 3x3x3 that the shop sells prior to purchase, and at no expense to the customer.

So if you want to see what I'm talking about with the Guhong, and want to see what the hype of Lubix is all about, give us about a week or so and go buy the Guhong from SpeedCubeShop, or any other 3x3x3 from them for that matter, and it will be shipped pre-lubed with Lubix and ready to go.

Thanks for reading,

- Pixel -

If that's how they're coming I'm sure it can't harm your cube
 
Thanks for the replies. I figured it was nothing to worry about, but having never owned a DIY before I wanted to make sure I wasn't doing something dumb with the tension ;)

Yes, the cube seems to perform well. I did use a couple drops of Maru, which really sped the cube up. Guess I'll just live with the creaking.

-Joe
 
It's just a spring rubbing the washer. When I hear that noise I drop some Maru lube on the screw head and turn until it goes down. I've done it with crc in the past but I recommend an injectable silicone like maru lube.
 
Problem solved!!!

I just had my DaYan Gu Hong 3x3x3. Few sides have those noisy springy sound.. So I thought trying all the method above but it didn't worked. So i took out the screw, spring and washer, then I fix them bak by making sure that the screws are perfectly straight. But theres 1 side of my cube that didnt work using the method. So i thought of wiping the screws see if it would help.. I wipe the screws, washer and spring using a DRY tissue. EUREKA!! it worked!! :D
hope this helps
 
Back
Top