SpeedStacks WCA Timer

Maybe have the timer built into the mat? Like the timer is a little lcd at the top of the mat and beeps when inspection is over. The whole mat has pressure sensitive sensors on it and it'll detect when you drop the cube and when your hands hit the mat.
----------------
|-----LCD------|
|--Whole mat--|
|---Pressure---|
|-- Sensitive---|
----------------
 
Last edited:
This setup will definitely be more expensive I think.. having to run the sensors throughout the whole surface..
 
I see a problem with the timer keeping track of averages. At a lot of competitions, the same person will not use the same timer 5 times in a row. There often times are more cubers than timers, and even with 2 groups, people often will need to share.

I think the bigger issue is that you'd have to have some interface to enter DNF and +2's.
 
I think it would be cool if they had a Wi-Fi connection so you could compare your time to other peoples times!
What would be the purpose of that?
Maybe have the timer built into the mat? Like the timer is a little lcd at the top of the mat and beeps when inspection is over. The whole mat has pressure sensitive sensors on it and it'll detect when you drop the cube and when your hands hit the mat.
----------------
|-----LCD------|
|--Whole mat--|
|---Pressure---|
|-- Sensitive---|
----------------

That's the rubik's timer. And what if you fumble the cube, and it hits the Pressure sensitive mat?

But IMO, we should have some realistic ideas; because I was browsing through some of the ideas, some were ridiculous, some were great.

For instance, buttons being less prone to break, running on AA batteries instead of coin batteries, also making the timer count to an hour however that would probably interfere with the displays and we shouldn't expect speedstacks to make personal cubing displays because it just isn't necessary, also if the times don't increase over 10 minutes and our speedstacks one does, it might not work. If it would have a larger screen maybe that would be nice. Or if it provided 3x3 scrambles that would be enough.

But one of my ideas I think would work very well with a program that could connect the stackmat to the computer that was a timer, and maybe someone can write a program that would provide scrambles. But NOT CCT because I find it is a little buggy with the connectivity.
 
Last edited:
I think it would be cool if they had a Wi-Fi connection so you could compare your time to other peoples times!
What would be the purpose of that?
Maybe have the timer built into the mat? Like the timer is a little lcd at the top of the mat and beeps when inspection is over. The whole mat has pressure sensitive sensors on it and it'll detect when you drop the cube and when your hands hit the mat.
----------------
|-----LCD------|
|--Whole mat--|
|---Pressure---|
|-- Sensitive---|
----------------

That's the rubik's timer. And what if you fumble the cube, and it hits the Pressure sensitive mat?

But IMO, we should have some realistic ideas; because I was browsing through some of the ideas, some were ridiculous, some were great.

For instance, buttons being less prone to break, running on AA batteries instead of coin batteries, also making the timer count to an hour however that would probably interfere with the displays and we shouldn't expect speedstacks to make personal cubing displays because it just isn't necessary, also if the times don't increase over 10 minutes and our speedstacks one does, it might not work. If it would have a larger screen maybe that would be nice. Or if it provided 3x3 scrambles that would be enough.

But one of my ideas I think would work very well with a program that could connect the stackmat to the computer that was a timer, and maybe someone can write a program that would provide scrambles. But NOT CCT because I find it is a little buggy with the connectivity.

Yeah, wifi, so you could bring your laptop and hack into everyone's timers... I see that going over well.

Pressure sensitive mat is a bad idea. Some events require having objects laying on the mat. Multiblind for instance, also some people solve magic while it is in contact with the mat, and most people solve master's magic this way. Not to mention the added cost and fragility.
 
Pressure sensitive mat is a bad idea. Some events require having objects laying on the mat. Multiblind for instance, also some people solve magic while it is in contact with the mat, and most people solve master's magic this way. Not to mention the added cost and fragility.

Furthermore, I've noticed that in Leyan's style, he slams his hands on the timer before the cube hits the mat.
 
-------------------------------
|88sensor8888888888888sensor |
-----------|8*888**8|---------
888888888|88time888|
888888888|8^8888P88|
888888888 __________

Ignore the 8's.

* = +2
** = DNF
time= display
^ = reset
P = power

Have AA/AAA batteries in the bottom half.
 
Last edited:
Maybe have the timer built into the mat? Like the timer is a little lcd at the top of the mat and beeps when inspection is over. The whole mat has pressure sensitive sensors on it and it'll detect when you drop the cube and when your hands hit the mat.
----------------
|-----LCD------|
|--Whole mat--|
|---Pressure---|
|-- Sensitive---|
----------------

Say goodbye to portability..

Defiantly
definately

My eyes!!

As for the timer, I definitely (that's d-e-f-i-n-i-t-e-l-y, people!) want it to be more accurate. I'd always had a hunch that some hundredths were more common than others (and I'm sure that the stackers want that too.) I'm against the idea of starting the timer with buttons because they'd have to make the buttons huge for us to be able to use them. Something that's less sensitive than what we have right now but not too hard to use like a button is what we need. Also, rather than having protectors over the power and reset buttons (which don't really work because the cube's corner can still hit the buttons) maybe we can have the timers require you to press the button twice or hold the button for a set amount of time before it resets/turns off.

I'd like to see a timer that provides scrambles, but calculating averages is too much. Say you have a DNF or a +2 during an average. You'll need to press a DNF or a +2 button, which would have no use at all except when you're doing averages (I don't see how you'd need any of that when you're just solving casually). Also, what if you accidentally start the timer before you're ready? Won't you also need a 'discard' button? The average function will just put 3 pretty much useless buttons on the timer, which we don't need. If you want to know your averages, figure them out yourself. I just don't see how we can have a timer that gives you your averages without it being very difficult to make.

I like the idea of the timer also giving optional preinspection if the amount of time given is adjustable. Instead of the timer starting right away when inspection is done like many computer timers do, I'd like to hear a beep that signals for you to put your cube down and hands on the timer, so you can start when you're ready.

I'm also all for raising the 10-minute limit to 30 minutes, or maybe having the limit be adjustable so that when you're doing big-cubes BLD you can raise the limit, and when you're done lower it back to 10 minutes so that you don't waste battery by accidentally leaving it running for 30 minutes. AA or AAA batteries would be nice too.

That's just my 2 cents.
 
Maybe have the timer built into the mat? Like the timer is a little lcd at the top of the mat and beeps when inspection is over. The whole mat has pressure sensitive sensors on it and it'll detect when you drop the cube and when your hands hit the mat.
----------------
|-----LCD------|
|--Whole mat--|
|---Pressure---|
|-- Sensitive---|
----------------

Welcome to Gen 1 timers.

http://uk.speedstacks.com/store/productsUK/stackmat_use_uk.htm
 
Well, I just got done reading through most of this thread, and here's a list of ideas that seem to be popular and functional.

• Sturdier (overall, specifically buttons/display)
• Less sensitive touch pads (to avoid .02's)
• Optional inspection (10 & 15 sec. using LCD's to signal.)
• Optional 'Extended Time' mode (10, 30, 60 mins.)
• USB connection.
• New power source (AA or AAA batteries)

Note: New buttons would be added so you could cycle through the Inspection and ExT modes.
 
This setup will definitely be more expensive I think.. having to run the sensors throughout the whole surface..

Seems like it would also be more prone to breakage. What would you do in a competition of the cube landed on a "dead" spot? Or if someone has a really light cube?

And I would think that buttons, with having a mechanical component to them as opposed to the current state, would be much more prone to breakage, especially with high use and people who hit the timers hard.
 
I'd rather have a simple timer, much like the one we have now. The only things I can really think of changing are:
1. Change 10 minute limit to one hour limit
2. The reset or Power buttons shouldn't work when the timer is going
3. You should need to hit the reset button twice before it does anything
 
Tip: If you want an ASCII graphic, put it in "code" tags, that will force it into a fixed width font.

Ex:
----------------
|-----LCD------|
|--Whole mat--|
|---Pressure---|
|-- Sensitive---|
----------------
vs.
Code:
----------------
|------LCD-----|
|--Whole mat--|
|---Pressure---|
|-- Sensitive---|
 ----------------
vs.
Code:
+-------------+
|-----LCD-----|
|--Whole mat--|
|--Pressure---|
|--Sensitive--|
+-------------+
 
And I would think that buttons, with having a mechanical component to them as opposed to the current state, would be much more prone to breakage, especially with high use and people who hit the timers hard.
You might think, but my spacebar is still ok after 4 years :) I'd still strongly support buttons as they might sole more problems than they would create.
 
Back
Top