Nebraskan Speedsolver's Custom Cubes and Puzzles | Interesting Puzzle Mod designed by 1x1 wr holder..

[An Animating Cuber]

I want to mod something like that, but the thing is, if I ruin the cube, Im out the 40 dollars or whatever and I will have to buy a new one. That's why I want to mod the QiYi M Pro, because its cheap and already has good performance, and then for 2x2, those were the only good options. Did you like the website that's in my signature?

If you shop from Chinese sites like Cubezz you can get puzzles in bulk for cheap.

 

[NebraskanSpeedsolver]

If you shop from Chinese sites like Cubezz you can get puzzles in bulk for cheap.

I thought about it, but because of shipping times from them it would take longer to make the cubes.

 

[artless1der]

I thought about it, but because of shipping times from them it would take longer to make the cubes.

that's not actually the case bro

since much of what you will be doing to make the saleable finished products on your website are based on standard model cubes already available from shops like Cubezz
you need to get a bunch of the ones you will be modding so you bave them kn hand to do the work once you have an order to fill
and
you save money that way...
THEN you would do your thing based on the order(s) you received.

when the cubes cost you less, you make more profit from the sales you make

my experience ordering from Cubezz is that it takes approx 17-20 days for my package to arrive here in faaar eastern Tennessee...
so you will prob get yours in about 2 weekstthere in NEB

I mean their Free Shipping option

 

[NebraskanSpeedsolver]

that's not actually the case bro

since much of what you will be doing to make the saleable finished products on your website are based on standard model cubes already available from shops like Cubezz
you need to get a bunch of the ones you will be modding so you bave them kn hand to do the work once you have an order to fill
and
you save money that way...
THEN you would do your thing based on the order(s) you received.

when the cubes cost you less, you make more profit from the sales you make

my experience ordering from Cubezz is that it takes approx 17-20 days for my package to arrive here in faaar eastern Tennessee...
so you will prob get yours in about 2 weekstthere in NEB

I mean their Free Shipping option

yea, but again, I dont want to have a bunvh on hand and then they dont sell
What I do is take the money frim the order and then order what I need with it, it shows up in a few days, i assemble, I ship out
if theres a setup service or soft coating service applied, thats a different story
@Bingus Ringus McDingus , you still up ti soft coat the cubes? I can build em and send them out to you to soft coat and yhen have you ship em to wherever need be if you'd like

 

[NebraskanSpeedsolver]

Started looking into the YuPo Maglev version, and I ran into a small predicament
So the inner part of the center, there is a very small lip, that I will probably have to either cut down or dremmel down, but either way, the inside of the center is still very small and I will have to do a lot of digging to find magnet rings that small

 

[artless1der]

Started looking into the YuPo Maglev version, and I ran into a small predicament
So the inner part of the center, there is a very small lip, that I will probably have to either cut down or dremmel down, but either way, the inside of the center is still very small and I will have to do a lot of digging to find magnet rings that small

and/or that are strong enough at that smaller diameter of magnet

 

[ZZCUBER]

What I do is take the money frim the order and then order what I need with it, it shows up in a few days, i assemble, I ship out

I've sold some stuff on ebay and I never got any money until the product was delivered

Started looking into the YuPo Maglev version, and I ran into a small predicament
So the inner part of the center, there is a very small lip, that I will probably have to either cut down or dremmel down, but either way, the inside of the center is still very small and I will have to do a lot of digging to find magnet rings that small

Have you considered the qiyi ms 2x2? I've heard it's pretty good

 

[NebraskanSpeedsolver]

I've sold some stuff on ebay and I never got any money until the product was delivered

Have you considered the qiyi ms 2x2? I've heard it's pretty good

for your mention about eBay, I took a look at the payment stuff. yea that sucks because I barely have enough in my account to make 3 MAGevos

I have tried the MS but I think the YuPo will work better because it has softer intervals ( when lubed ) and has pretty strong magnets

 

[Davian]

Are you accepting other cash such as euro

 

[NebraskanSpeedsolver]

Are you accepting other cash such as euro

If you go through the eBay listing you should be able to purchase the cube in your currency

 

[OreKehStrah]

yea, but again, I dont want to have a bunvh on hand and then they dont sell
What I do is take the money frim the order and then order what I need with it, it shows up in a few days, i assemble, I ship out
if theres a setup service or soft coating service applied, thats a different story
@Bingus Ringus McDingus , you still up ti soft coat the cubes? I can build em and send them out to you to soft coat and yhen have you ship em to wherever need be if you'd like

That would just further inflate costs shipping to another person before the consumer.

 

[NebraskanSpeedsolver]

I get that, but he offered the service and was ok with use putting in on the site.

 

[artless1der]

If you go through the eBay listing you should be able to purchase the cube in your currency

Sadly, when I looked recently on the USPS website, their calculator shows the least it would cost me (in east TN) to ship to China is over $15, to Germany over $26, and over $33 to ship to South America...
Trying to ship outside the U.S. would greatly inflate costs

 

[NebraskanSpeedsolver]

sqdly, when I looked recently on the USPS website, their calculator shows the least it would cost me (in east TN) to ship to China is over $15, to Germany over $26, and over $33 to ship to South America...
Trying to ship outside the U.S. would greatly inflate costs

well, if thats the case, I may have to change pricing a little bit. I have to do it in less than 18 hrs, becasue I will be out of town and wont have access to the account during the next week

 

[NebraskanSpeedsolver]

First MAGevo sold! ordering stuff tomorrow. taking a small loss on it because Im buying a new 5x5 with it

 

[NebraskanSpeedsolver]

Added the GAN Mirror M UV [Magnetic Core] to the site. Plan to get that prototype made soon, hopefully by the end of the year along with the 2x2 prototypes

 

[NebraskanSpeedsolver]

First MAGevo sold and shipped!

 

[NebraskanSpeedsolver]

Alright, gettin down the business.
So, I have decided that the next product on the site will either be the Maglev QiYi M Pro or the Maglev YuPo V2
I also decided I will be offering a matte coating for glossy puzzles (idk if anyone will want it, but hey)

 

[NebraskanSpeedsolver]

Alright, gettin down the business.
So, I have decided that the next product on the site will either be the Maglev QiYi M Pro or the Maglev YuPo V2
I also decided I will be offering a matte coating for glossy puzzles (idk if anyone will want it, but hey)

What types of mods should I try for big cubes?

 

[NebraskanSpeedsolver]

also, 2100 views on this thread now