[Konsta Mod] ShengShou 4x4 solution to internal lock-ups

[Hunter]

I finished my mod last night, and I first put it together it was way worse than before I started.

After a little lube, some breaking in and a re-tension it made a huge transformation, and it is now much better than before!


I am thinking now about sanding some open areas on the 4 corners of each face like my ZhanChi to give it a little reverse corner cutting.

 

[samchoochiu]

I did the konsta and florian mod then tighten the cube ALL the way, and I loved it.
I still like it but I noticed that after a week of use (did about 100 solves total) its starting to lock up more.
Anyone else experiencing this?

 

[KingTim96]

idk about you, but i only did the florian mod and the cube has gne to crap, it locks up, even POPS, and feel all scratchy and like there is something holding it back. i wana tighten it. (and this may sound stupid) but idk how to tighten it because there are no center caps so it just looks weird. any help?

I did the konsta and florian mod then tighten the cube ALL the way, and I loved it.
I still like it but I noticed that after a week of use (did about 100 solves total) its starting to lock up more.
Anyone else experiencing this?

 

[yoshinator]

idk about you, but i only did the florian mod and the cube has gne to crap, it locks up, even POPS, and feel all scratchy and like there is something holding it back. i wana tighten it. (and this may sound stupid) but idk how to tighten it because there are no center caps so it just looks weird. any help?

Just tighten the screws on the core.

 

[mdolszak]

Here's a video by Cyoubx showing this mod + the Florian mod:
http://www.youtube.com/watch?v=q5TeqKqU8wk

 

[maxyso]

well sounds like you only did the konsta, no florian? am i right cuz the mod you wanted to do shud be part of florian mod, which should also be done.

 

[Cheese11]

well sounds like you only did the konsta, no florian? am i right cuz the mod you wanted to do shud be part of florian mod, which should also be done.

I did the Konsta mod and did not do the Florian mod, my cube feels just as good as a ShengShou with both mods.

 

[maxyso]

I did the Konsta mod and did not do the Florian mod, my cube feels just as good as a ShengShou with both mods.

well i did both and it feels good. some people say konsta only makes 3x3 stage horrible and konsta said he assumed florian was already done.

 

[NSKuber]

So, yesterday I spent all day modding my SS 4x4(actual modding time is ~4 hours I think, but there were many breaks). I did Florian's and Konsta's mods. Lubed the core with Lubix and assembled. And was like WTF WHY IS IT SO FAST EVEN IF I TIGHTEN IT SO MUCH THAT IT DOESN'T CUT CORNERS. Really, it's super fast, too fast. After I put Lubix it became bit better, but still I need time to get used to it. Almost no lock-ups. And few attempts of some algs:
PLL parity(l2 U2 l2 Uw2 l2 Uw2) - 0.86
H-Perm - 0.88
T-Perm - 1.03(I think I can do sub-1, just was unlucky yesterday)
6 RURU's - 1.41
OLL Parity 2.33.
In total: AWESOME mods. Do it if you want to have fastest 4x4 in the world.

 

[Cheese11]

well i did both and it feels good. some people say konsta only makes 3x3 stage horrible and konsta said he assumed florian was already done.

Well he shouldn't just assume that everyone did the Florian.

 

[Stingray970]

Well, if you're doing the Konsta mod, you might as well take the time to do Florian as well as you already have the modding materials.

 

[Andri Maulana]

Finished this mod yesterday, WITHOUT Florian's mod.

First thought, the cube became a bit loose so i need to retension it. The outer layer turn faster, almost no lockup.

I haven't encounter any internal lockup yet, but sometimes got external lockup. Maybe i should try florian mod too

Overall, this mod definitely worth to do. It reduces internal lockup that you got when perform pll parity or h-perm.

 

[PeelingStickers]

I did similiar to the above, I did some of the florian although I didn't have much time to do the edges, cube is very nice, very few lockups and still pretty fast, corner cutting could be better which is why I'm intending to finish the florian sometime.

Any tips for how much I should sand off the edges?

 

[googlebleh]

Any tips for how much I should sand off the edges?

About as much as you did the corners. If you watch the cube from the back as you try to reverse-corner-cut (which is what the sanding is supposed to allow), then you'll notice that the cube won't really cut unless both the corners and the edges are rounded.

 

[DavidFivexFive]

How to stop shengshou V4 inner layer lockups?

Im not sure how to stop inner layer lock ups, could anyone direct me to a mod or a picture of what to mod?

 

[o2gulo]

I don't own a SS 4x4 and I'm no expert in these things but, I'd say you could do the Konsta mod for your SS, I heard it reduces lockups, There's also a Florian mod out there

Here, you could use the "search" button y'know.

http://www.speedsolving.com/forum/showthread.php?36217-SS-4x4-solution-to-internal-lock-ups

 

[sneaklyfox]

From what I have read/heard/watched, you should not do Konsta without doing Florian but what do I know...

 

[BigGreen]

konsta mod is fine on its own.

 

[googlebleh]

For 4x4:
My mod<Konsta<both

But keep in mind, Florian said this before the SS4 v4 was made. Both those mods were made for the SS4 v3, so idk how well they work on the v4

 

[JAMtron]

SS 4x4 solution to internal lock-ups

I was also wondering how this mod works on the SS V4


waka waka waka