Choosing the quickest/easiest to turn cube

[Rainger]

A little while back I created a thread asking for opinions on the “easiest turner”. I wanted to find which cube Has the least resistance (with and without lube) as my fingers get pretty tired with my cubes with heavy magnets and such. I will probably make another video testing out different lubricants such as Lunar, Max Fleet, etc. Please let me know what you think and if this is useful, constructive criticism will only help me too. Thanks everyone.

Here’s the link to my video on YouTube

 

[Sub1Hour]

If you want a really easy cube to turn, I would highly recommend either version of the GAN 354 on purple springs. If you want a GTS2 with standard colors, the last time I checked there are still some black ones left on the Cubicle. If you want stickerless you can get the WCA edition. But be careful as the WCA edition has stronger magnets than the standard. Also nice video, very high quality!

 

[Rainger]

If you want a really easy cube to turn, I would highly recommend either version of the GAN 354 on purple springs. If you want a GTS2 with standard colors, the last time I checked there are still some black ones left on the Cubicle. If you want stickerless you can get the WCA edition. But be careful as the WCA edition has stronger magnets than the standard. Also nice video, very high quality!

Thank you! I haven’t tried the 354 but I will try it out ASAP

 

[Owen Morrison]

Have you tried the Moyu WR M? I think it has pretty light magnets and turns really easily.

 

[Rainger]

Have you tried the Moyu WR M? I think it has pretty light magnets and turns really easily.

I heard it was just the gts3m without ridges. I didn’t know they actually used lighter magnets too. I’ll look into it.

 

[PetrusQuber]

I think the Dayan Tengyun is pretty fast and effortless to turn.

 

[Rainger]

I think the Dayan Tengyun is pretty fast and effortless to turn.

Me too. It’s near perfect if you want an effortless cube.

 

[EngiNerdBrian]

Me too. It’s near perfect if you want an effortless cube.

GAN356XS is nearly effortless to turn. I received my Tengyun today and it's very comparable to the 356XS at a fraction of the cost.

 

[MJS Cubing]

I heard it was just the gts3m without ridges. I didn’t know they actually used lighter magnets too. I’ll look into it.

Get the GTS2M. It is basically a WRM with lighter magnets, and mine is really effortless to turn and corner cut.

 

[Sub1Hour]

Get the GTS2M. It is basically a WRM with lighter magnets, and mine is really effortless to turn and corner cut.

I disagree with that statement. I find the GTS2 to be much softer feeling and a little bit slower with the same setup as the wrm. The wrm feels much snappier and cleaner compared to the smoother and softer GTS2

 

[ProStar]

Get the GTS2M. It is basically a WRM with lighter magnets, and mine is really effortless to turn and corner cut.

I think you meant the GTS2M is a worse version of the WRM. It's just an older model

 

[Rainger]

Get the GTS2M. It is basically a WRM with lighter magnets, and mine is really effortless to turn and corner cut.

I actually have one in the video, haha.