Bhargav777
OH friendly please
Yuno focus the display? :/ what were the times?
Last edited by a moderator:
World Championships 2013 - Las Vegas
- Thread starter Tyson
- Start date
-
- Tags
- championship world
Yuno focus the display? :/ what were the times?
Noahaha
blindmod
Last edited by a moderator:
moralsh
Veteran
Awesome Noah, moar videos please!
lordblendi
Regular
Did anyone record the seminars?
acohen527
Regular
Noah has his on video, I'm sure someone recorded the 3x3.
timothywong24
Member
Tim Wong 20/23 in 57:51 MBLD NAR + 2nd Place at Worlds
Last edited by a moderator:
Yuxuibbs
Veteran
Could people post the seminar vids here? Didn't have time to check if cubecast got any of the seminars and I really want to watch them.
Hays
Veteran
I'll sum up the big cubes seminar in one word: practice.
legoanimate98
Regular
It was like 18,15,18 I would have gotten the display, but there were about 150 other people crowding around so I couldn't get a better angle.
I also got this video of Feliks Zemdegs, Mats Valk, Cornelius Dieckmann racing
Last edited by a moderator:
Hyprul 9-ty2
Veteran
- Joined
- Sep 25, 2009
- Messages
- 1,300
- Location
- Waterloo, Ontario
- WCA ID
- 2009XIAT02
- YouTube
- Visit Channel
Cornelius has such a sexy, manly voice X_X
CarlBrannen
Veteran
I've got four prize cubes for the consolation round completed. I printed an instruction sheet to go along with them. To give people an electronic copy, I'll reproduce it here:
INFORMATION / INSTRUCTIONS
World Cubing Championship Consolation Round Prize Cubes by Carl Brannen
The paint is still curing / drying. It will become harder over the next few weeks. Avoid rough usage (fingernails, dropping) for a few weeks.
Painting these cubes was a learning experience for me. I had to remove the paint several times. The deep scratches are due to my errors while removing bad paint. Sorry about that.
Once the cube is completely dry (two weeks from now), you might consider very lightly sanding the clear surface and then polishing it. If I'd finished them sooner I'd have done this myself. Use products suitable for polishing car paint. The key to doing this right is to sand very very lightly. I use the 3000 grit sandpaper that is used to smooth car paint. You could probably get away with sandpaper as coarse as 1000 grit. Here's a source for 3000 grit sandpaper:
http://www.autodetailingsolutions.net/s-3000.html?kw=s-3000&cmp=googleproducts
After sanding with 3000 grit, I like to polish with pumice and "rotten stone" or "tripoli". These are used in woodworking to make polished wood surfaces:
http://en.wikipedia.org/wiki/Rotten_stone
The 6 colors each have 4 color coats of Krylon Fusion for Plastics spray paint:
http://www.krylon.com/products/fusion-for-plastic/
To protect the color coats, there are 8 coats of Krylon Fusion for Plastics Clear spray paint. If you notice the clear coat beginning to wear away, you can recoat the clear by using this spray paint. Sand lightly with very fine sand paper so that the new coat is able to stick. The clear spray paint used is described here and is available all over the US:
http://www.krylon.com/products/fusion-for-plastic-clear/
Internal surfaces have been flattened to reduce friction.
I'd like to thank www.speedcubeshop.com for lubricating these cubes with Maru Lube.
Thank you for enjoying these prize cubes. Making them was a lot of fun and a learning experience.
Carl Brannen [email protected]
World Cubing Championship Consolation Round Prize Cubes by Carl Brannen
The paint is still curing / drying. It will become harder over the next few weeks. Avoid rough usage (fingernails, dropping) for a few weeks.
Painting these cubes was a learning experience for me. I had to remove the paint several times. The deep scratches are due to my errors while removing bad paint. Sorry about that.
Once the cube is completely dry (two weeks from now), you might consider very lightly sanding the clear surface and then polishing it. If I'd finished them sooner I'd have done this myself. Use products suitable for polishing car paint. The key to doing this right is to sand very very lightly. I use the 3000 grit sandpaper that is used to smooth car paint. You could probably get away with sandpaper as coarse as 1000 grit. Here's a source for 3000 grit sandpaper:
http://www.autodetailingsolutions.net/s-3000.html?kw=s-3000&cmp=googleproducts
After sanding with 3000 grit, I like to polish with pumice and "rotten stone" or "tripoli". These are used in woodworking to make polished wood surfaces:
http://en.wikipedia.org/wiki/Rotten_stone
The 6 colors each have 4 color coats of Krylon Fusion for Plastics spray paint:
http://www.krylon.com/products/fusion-for-plastic/
To protect the color coats, there are 8 coats of Krylon Fusion for Plastics Clear spray paint. If you notice the clear coat beginning to wear away, you can recoat the clear by using this spray paint. Sand lightly with very fine sand paper so that the new coat is able to stick. The clear spray paint used is described here and is available all over the US:
http://www.krylon.com/products/fusion-for-plastic-clear/
Internal surfaces have been flattened to reduce friction.
I'd like to thank www.speedcubeshop.com for lubricating these cubes with Maru Lube.
Thank you for enjoying these prize cubes. Making them was a lot of fun and a learning experience.
Carl Brannen [email protected]
scottishcuber
Veteran
Pretty sure Breandan got a sub-1 single
edit: 58.89
edit: 58.89
Last edited:
Antonie faz fan
Veteran
feliks got a 10.12 single on OH
Ollie
Legend
DrKorbin
Veteran
Any news from 4x4 bld?
PeelingStickers
Veteran
Yay breandan sub 1 NR 5x5 single
Antonie faz fan
Veteran
guys cube comps frozze!!!!!!
Username
Legend
1. There's nothing we could do about it
2. It didn't freeze
jazzthief81
Premium Member
Semi-live results for 3x3x3 consolation round:
https://docs.google.com/spreadsheet/ccc?key=0AtWDnMWk-rZfdG9qNDJpNEdQdzhpa2h1eDdqYkNmVFE&usp=sharing
https://docs.google.com/spreadsheet/ccc?key=0AtWDnMWk-rZfdG9qNDJpNEdQdzhpa2h1eDdqYkNmVFE&usp=sharing
Similar threads
