Dayan 6: PanShi [pictures]

I assembled mine yesterday. I did not use torpedoes.
I put a drop of clue on my corners, and tied it off with string to dry. Got all my corners done in a few minutes this way.
View attachment 2730
This is probably my best cube, I have gotten a few pops per ao100 which is normal.


I have no catching whatsoever. : |
Thank you on the string tip!! Will do this as well :)
 
I sanded down the center pieces just a little bit, and glued together the corner pieces. It got a lot better... But compared to a brand new zhanchi (which i have), its not nice at all. Nope, no panshi for me! :(
 
It worked wonders on mine. The cube is smoother overall, and corner cutting has improved greatly (Before it could cut line to line, now it cuts well past 45)
 
okay, idk whats with this cube, but I got mine and actually broke a torpedo on my FIRST solve before taking them out. Then I took it apart, cleaned out the lube and retried it with jigaloo. it was okayish... but still awful. I took it apart again and put traxxas in the centers, did the 48-point edge mod (i'm getting fast at it finally), cleaned out the jigaloo, and then put traxxas on all contact points within the cube i could reach. After about 40-50 solves like this I was very annoyed and about to give up on it when suddenly i started getting really good solves (i avg 19-20 secs) around 15-17. I set my pb ao5 TWICE (now 16.39) as well as my pb ao12 (17.35). The catching can be reduced with enough lube and good tensioning in those areas (at least it was for me). and who knows? maybe someone will figure out a mod for it, or it might go away with enough breaking in.
In the end, i'm convinced that while it is dayans worst out of the box, it does have very good potential. If the catching is removed then I'd say it's better than the zhanchi.

EDIT: my ao12 dropped again with another solve.
 
Last edited:
okay, idk whats with this cube, but I got mine and actually broke a torpedo on my FIRST solve before taking them out. Then I took it apart, cleaned out the lube and retried it with jigaloo. it was okayish... but still awful. I took it apart again and put traxxas in the centers, did the 48-point edge mod (i'm getting fast at it finally), cleaned out the jigaloo, and then put traxxas on all contact points within the cube i could reach. After about 40-50 solves like this I was very annoyed and about to give up on it when suddenly i started getting really good solves (i avg 19-20 secs) around 15-17. I set my pb ao5 TWICE (now 16.39) as well as my pb ao12 (17.35). The catching can be reduced with enough lube and good tensioning in those areas (at least it was for me). and who knows? maybe someone will figure out a mod for it, or it might go away with enough breaking in.
In the end, i'm convinced that while it is dayans worst out of the box, it does have very good potential. If the catching is removed then I'd say it's better than the zhanchi.

EDIT: my ao12 dropped again with another solve.

Which cube were you using before?
 
..suddenly i started getting really good solves (i avg 19-20 secs) around 15-17. I set my pb ao5 TWICE (now 16.39) as well as my pb ao12 (17.35).
EDIT: my ao12 dropped again with another solve.

7.80, 9.31, 8.17, 8.45, 8.94, 8.54, 9.32, 10.35, (11.09), (7.74), 8.94, 9.31 = 8.91

Panshi passes the speedtest

Well, I must say I am looking forward to receiving my Panshi's again after loosing faith there for a while ;)
 
I am very looking forward for the panshi. Also all this bad (or at leas not so good) impressions of other cubers made me curious.
I hope two of the three i've ordered will arrive soon. They are on their way from Hong Kong to me at the moment. (Mon 11.03.2013 08:48, Departure from border point of origin country, HKHKGA)
 
Got my LubixCube PanShi today.

I was hoping the Lubix brand would be better, but it's not. I removed the torpedos, a slight improvement, but it still feels bone-dry and catches like crazy. Ugh...I'll break it in and mess with the tensions, but I'm pretty sure I'll be sticking with the ZhanChi until something better comes along.

Very disappointing.

For those of you who are purchasing from Lubix for the first time, don't be turned off by this. Lubix makes awesome cubes...just not this one. Perhaps down the road they'll figure out a better mod for it.
 
So far I have two Panshi's:

* Black DIY - corner stalks broke off despite having everything loosened up to take pieces out.

* White pre-assembled - lubed/tensioned/tweaked/broke-in for about 5 hours so far.... the cube just grinds and catches like a mother.

Edit: Both cubes, I tried with/without torpedoes. At current, I've left the torpedoes out as I don't see their point in this form factor of a cube.

I don't anticipate going much further with the Panshi, unless one of the several DIY's I have left are less fragile/somehow don't exhibit the extraneous catching/grinding. Modding is fun and all, but not sure I'll make the investment with so many ZhanChi's/GuHong V2's lying around that require zero modding to be fully functional.
 
Last edited:
I've received mine, I haven't fiddled too much with it, but I do find it quite good. I did "drown" it in lube, but it seems quite good. It definitely got a special feel to it, but I would rank it up there with my ZhanChi (please do take into account I am not a fast cuber, around 20 seconds average), however I do feel some of the "catching" others have been reported. I just do not think it is much of an issue.
Just my opinion on the PanShi.
 
Panshi was not that bad after all. I got mine last 2 days ago and after playing with tensions i already achieved the out of the box guhong v2 feeling. It's still unlubed and been breaking it in since day one. I removed the torpedoes since it is the one behind the breakage of the internals of the cube. So after a massive solves i think i done more than 100+ solves there no broken part especially the corners.
 
Back
Top