Smoke Damage

David Emms

Regular
Joined
Oct 23, 2011
Messages
33
YouTube
Visit Channel
Hi Everyone

Last night we had a fire in the front room. Luckily, we have a fireproof carpet - but the rug went up in flames.

Everything in the living room is damaged from the smoke (because it's so hard to remove).

Without removing or damaging the stickers, what's the best way to thoroughly clean your cubes?
I've tried a dry cloth and a damp cloth but it just smudges blackness al over the cube.

Any help would be greatly appreciated.

Thanks
 
I also tried blowing them but it's not that easy :(

My mum made sure there was plenty of coal and a log on the fire so it would be warm when we got home... the log fell off the fire, knocked over the fire guard an the guard somehow 'flicked' it onto the carpet... everything is ruined :(
 
you may want to try some GOO GONE, just damp a cloth with it and just gentaly wipe the cube down with it and see what that does. you do not need a lot, i use it to clean my cubes and it does a great job.
 
I haven't tried sandpaper, never actually thought of that

Won't the stickers come off in the dishwasher? I did actually think of taking them all apart and hand washing them. I can see this being very time consuming and there's still the worry of the stickers coming off.

I don't mind so much about my Dayans because I can re-sticker those easily... but I do have quite a collection going on

Imagine this... but black :(

397943_10150601539076055_730376054_11374535_478177175_n.jpg
 
you may want to try some GOO GONE, just damp a cloth with it and just gentaly wipe the cube down with it and see what that does. you do not need a lot, i use it to clean my cubes and it does a great job.

Thank you for this suggestion! It reminded me of something I saw online once... (Cyber Clean)

thu051_cyber_clean_hand300.jpg


This would get round all of the stickers (where the soot seems to congregate) and hopefully clean it all off.

I'm still open to suggestions!
 
Cleaning it definitely doesn't ruin your stickers nor decrease the life of it. For example, I have a Shengshou 3x3 that has been scrubbed, washed, cleaned with soap and dried for over 5 times (this is because I screwed up the lubing), and now, the stickers look very good. I've been using this Shengshou for half a year now, only a few chips. Dayan Stickers? For my Zhanchi, many chips were appearing within a few days.

Here is someone that is "trustworthy" in my opinion who can show it too: http://www.youtube.com/watch?v=gXNTSqJFZZc
 
sounds like it could have burned down the entire house!
i would just throw them in the dishwasher with the pieces in one of my mom's stockings.

my cubes would just melt away b/c they are stored in a cardboard box...
 
I'm really sorry to hear that man. Like someone else mentioned if they're good enough stickers they should be able to withstand some soapy water and a scrubbing. Cubesmith refuse to come off unless you want them to. Is there any chance that you've restickered every puzzle you own with cubesmith stickers...? I definitely wouldn't advise water if they're just "stock" stickers. Most of them are garbage.

Edit: Super high grit sandpaper only if you do go that route.
 
Last edited:
I recommend isopropyl alcohol. (rubbing alcohol) It is a pretty good cleaner, but I have never had it to effect my stickers. I would NOT recommend Goo Gone or anything similar, as it is specifically meant to remove adhesive, which just so happens to be what hold the stickers on the cube. The great part about alcohol is that it evaporates so readily, so if you get a ton of it in your cubes, no problem. The downside is that it will most likely clean out all of the lube, so you will have to relube everything.
 
I recommend isopropyl alcohol. (rubbing alcohol) It is a pretty good cleaner, but I have never had it to effect my stickers. I would NOT recommend Goo Gone or anything similar, as it is specifically meant to remove adhesive, which just so happens to be what hold the stickers on the cube. The great part about alcohol is that it evaporates so readily, so if you get a ton of it in your cubes, no problem. The downside is that it will most likely clean out all of the lube, so you will have to relube everything.

Ah, yes, rubbing alcohol, great idea. You can get it easily from the pharmacy or other stores. It can also clean out the germs too! :p
 
Be carful with isopropyl it can melt plastic. I would say disassemble them and use a cloth or napkin. Wet the rag and make sure it's completely dry before reassembling. And yes you will have to relube.
Isopropyl is great around the house.
 
Some really good ideas, thanks!

Unfortunately I haven't re-stickered any of my cubes because quite a few of them are vintage cubes from the 80's.

Thankfully some are in little cardboard boxes and some are in plastic containers.

Here's an image of what I'm up against:

397943_10150601539076055_730376054_11374535_478177175_n.jpg


hiGs


Now of course the cubes don't look too bad in this picture but please remember that everything you see on the walls is all over the cubes. (The walls used to be white)

I've actually tried baby wipes so far. This seems to get quite a lot of the soot off but they aren't as sparkly as they used to be :(

I don't mind too much about my 'modern cubes' (although I've never taken a 2x2x2, 4x4x4 or 5x5x5 apart) but as you can see i do have some older cubes in there too.

Thanks for all the replies so far guys :)
 
Last edited:
Back
Top