Self-Lubricating Cube

HowSuneIsNow

Regular
Joined
Sep 26, 2009
Messages
186
Location
NYC
WCA ID
2009DAVI03
In short: You stick a sponge soaked in lube in one of the edge pieces.

I've had an idea kicking around in my head for a while. I get new people into cubing casually and eventually the cube slows down. what if we could make a self lubricating cube that stays lubed at least three times longer if not more than a dozen.

I have come up with something elegant that seems to work and I will do my best to test it extensively and invite others to as well.

It only works on cubes with non-sealed edge pieces of cubes that you can remove the cap of.

supplies:
  • sponge
  • shock oil (I use 10wt)
  • scissors or a hobby knife (to cut the sponge)
Cut a a piece of the sponge to fit well (I will get back to this later) in the cavity of one of the edge pieces. lightly apply shock oil to the sponge without it being sopping wet. insert the sponge in an edge piece and start cubing.

The sponge will apply the lube directly to cubie surfaces. It also wipes excess lube off the surfaces so it doesn't get too slow while keeping the lube away from the core where it can slow down the cube.

as for cutting the sponge if you cut it too small it will flop around and not make contact with the other cubies. if you cut it too big it may cause extra friction. cut it bigger than you need because you can always make it smaller.

This is not the ultimate way to lube your speed cube. this is for casual cubers and your every day cube, your work horse. It's also something great you can do to a store baught.
 
Last edited:
I like this idea~
I want to test it, before making a judgement.
If only I had shock oil to try it....

do you use aerosol silicone? you can just spray out a bunch of that and soak it up with a sponge. you might get slightly different results than me.



Why shock oil?
no particular reason. I also have jigaloo, but it seems to create waxy build up. I wanted something that would stay liquid. Really other liquids should work fine. the recent thread about shock oil had me thinking about it a lot and trying out some other experiments that were not as successful.
 
have you tried it out before? :3

share with us your results after you have tried out, not make us your guinea pigs xD

actually I use both shock oil and silicone spray....depends on my mood.

I've been using this cube for the past 2 hours. It will probably take me a month of regular use to test it's limits.
 
i have an idea similar to this, but cant be done without changing the type of plastic used for cubes: there is this plastic that "heals" itself be having, inside, small hollows filled with a chemical that, when reacts with air, melts the plastic a little so that when the plastic gets damaged, it heals the crack. If, instead of the melting fluid, we put in lube, as the cube wore in, it would release tiny amounts of this lube and would autolube the cube. :)
 
i have an idea similar to this, but cant be done without changing the type of plastic used for cubes: there is this plastic that "heals" itself be having, inside, small hollows filled with a chemical that, when reacts with air, melts the plastic a little so that when the plastic gets damaged, it heals the crack. If, instead of the melting fluid, we put in lube, as the cube wore in, it would release tiny amounts of this lube and would autolube the cube. :)

Erm. *scratches head*
And this will...save us time?
 
Lubing my cube the standard way.
~40 sec and then a bit of working in.

Creating all these contraptions, AND keeping them maintained.
~A while.

spraying your cube takes multiple times builds up more product which slows down the cube. you then have to clean them and relube them.

the "contraption" you are talking about is a damp sponge. maintenance? the point is it creates LESS maintenance. you cut a sponge not too big not to small. you then wet it with lube. then you stop thinking and cube away. If you're liek me and you teach peopel to cube and they don't want to think about lubbing their cube this would be perfect. if you are someone that needs adults to hold the scissors for them this might be a little too advanced.
 
Back
Top