How to make Custom Logos

[Deleted member 52530]

Yes i know there have been threads before. But they are so old and cubesmith doesn't exist anymore.

From what i gather inkjet printers and tape is a method but i don't have one.
What way is there to make a custom logo on stickerless cubes?

 

[ProStar]

3D print a cap with a logo on it if you want a non-sticker logo on a stickerless cube. For stickers, I imagine you can just design a logo on the computer and print it on sticker-material-thingie. I guess

 

[OreKehStrah]

Yes i know there have been threads before. But they are so old and cubesmith doesn't exist anymore.

From what i gather inkjet printers and tape is a method but i don't have one.
What way is there to make a custom logo on stickerless cubes?

TheCubicle might still do custom logos. I’m not sure though

 

[GAN 356 X]

Would it be Wca legal to have a logo that has your name on it instead of a normal cube logo so its harder to lose?

 

[OreKehStrah]

Would it be Wca legal to have a logo that has your name on it instead of a normal cube logo so its harder to lose?

Yes. I don’t see why not since cubes like the Valk have theValk printed on the logo, and on squan, people usually put some text as the logo

 

[GAN 356 X]

Would it be Wca legal to have a logo that has your name on it instead of a normal cube logo so its harder to lose?

Yes. I don’t see why not since cubes like the Valk have theValk printed on the logo, and on squan, people usually put some text as the logo

@Kit Clement

 

[Deleted member 52530]

Let me rephrase im not rich. I don't have a 3d printer. the closest i can find is draw it on tape but it wont print onto the piece effectively and it's a night mare to draw on

 

[OreKehStrah]

Let me rephrase im not rich. I don't have a 3d printer. the closest i can find is draw it on tape but it wont print onto the piece effectively and it's a night mare to draw on

You could try hand engraving a center with an exacto knife. This is very hard and dangerous though so do so at your own risk. I am not responsible for any actions you take. I would not recommend this at all unless you just wanna put a blocky Letter or a square or something super simple.

 

[2018AMSB02]

I use this:

https://www.amazon.com/Xyron-Sticker-Maker-XRN150-inch/dp/B0001DU6RS/ref=sxin_4_ac_d_rm?ac_md=0-0-c3RpY2tlciBtYWtlcg%3D%3D-ac_d_rm&cv_ct_cx=sticker+maker&keywords=sticker+maker&pd_rd_i=B0001DU6RS&pd_rd_r=3ee0a159-a12b-47bd-8c9e-1589b41c8c1c&pd_rd_w=Jc0PT&pd_rd_wg=Fiucj&pf_rd_p=de19e82a-2d83-4ae8-9f5c-212586b8b9a0&pf_rd_r=H7S5X92VDQZP6MTXDYPA&psc=1&qid=1581225515&sr=1-1-12d4272d-8adb-4121-8624-135149aa9081

You can print anything and put it in here to make a logo

 

[Daxton Brumfield]

I use this:

https://www.amazon.com/Xyron-Sticker-Maker-XRN150-inch/dp/B0001DU6RS/ref=sxin_4_ac_d_rm?ac_md=0-0-c3RpY2tlciBtYWtlcg%3D%3D-ac_d_rm&cv_ct_cx=sticker+maker&keywords=sticker+maker&pd_rd_i=B0001DU6RS&pd_rd_r=3ee0a159-a12b-47bd-8c9e-1589b41c8c1c&pd_rd_w=Jc0PT&pd_rd_wg=Fiucj&pf_rd_p=de19e82a-2d83-4ae8-9f5c-212586b8b9a0&pf_rd_r=H7S5X92VDQZP6MTXDYPA&psc=1&qid=1581225515&sr=1-1-12d4272d-8adb-4121-8624-135149aa9081

You can print anything and put it in here to make a logo

That actually looks super cool. What size do you print your logos for 3x3, and do you just print them on regular paper?

 

[2018AMSB02]

That actually looks super cool. What size do you print your logos for 3x3, and do you just print them on regular paper?

Yeah, I don’t know what size, sometimes I just draw them to get it right. I actually stickered some of my 3D printed puzzles with it and it worked. Just use regular paper too.

 

[Kit Clement]

Your name can be a logo, so long as it is the only logo on the cube. You can remove the other logo or write your name on the existing logo piece.

If you don't want to trash your logo though, I've seen people write their name on the inside of a center cap before too.

 

[Deleted member 52530]

rephrase no 3

thanks so far. but i don't wish for my name, but this

 

[2018AMSB02]

rephrase no 3

thanks so far. but i don't wish for my name, but this
View attachment 11371

Ok, that could easily be drawn as well like Kit was saying. When I design my logos though I use google drawings to anyone who’s interested

 

[ProStar]

rephrase no 3

thanks so far. but i don't wish for my name, but this
View attachment 11371

Wait, you want your cube logo to be... a cube?

 

[Deleted member 52530]

Wait, you want your cube logo to be... a cube?

cause then noone will be like hey that's my cube cause i use popular cubes

 

[qwr]

Sorry for bump but does anyone have experience with printing custom clear stickers? I have some logo stickers that are peeling and I would like to replace them.
I asked thecubicle about it but I think they only do custom logos in batches of 150+ or some large quantity. Also I asked Calvin from HKNowStore and he says he still might have some extra logo stickers lying around.

I think I can do it with my inkjet printer at home with transparent sticker paper. I'm also not sure how to get rounded stickers - I'll probably have to do that myself with a knife.

 

[Deleted member 54663]

Sorry for bump but does anyone have experience with printing custom clear stickers? I have some logo stickers that are peeling and I would like to replace them.
I asked thecubicle about it but I think they only do custom logos in batches of 150+ or some large quantity. Also I asked Calvin from HKNowStore and he says he still might have some extra logo stickers lying around.

I think I can do it with my inkjet printer at home with transparent sticker paper. I'm also not sure how to get rounded stickers - I'll probably have to do that myself with a knife.

I think Cyoubx made a video on this topic with an inkjet printer, it worked for my friend.

 

[Sub1Hour]

Sorry for bump but does anyone have experience with printing custom clear stickers? I have some logo stickers that are peeling and I would like to replace them.
I asked thecubicle about it but I think they only do custom logos in batches of 150+ or some large quantity. Also I asked Calvin from HKNowStore and he says he still might have some extra logo stickers lying around.

I think I can do it with my inkjet printer at home with transparent sticker paper. I'm also not sure how to get rounded stickers - I'll probably have to do that myself with a knife.

That should work just fine.
However, there is another method to make logos, use a Cricut. They will be similar to the premium cube logos from TC since they will be shaped like the logo, not just shaped like a center cap.

 

[qwr]

That should work just fine.
However, there is another method to make logos, use a Cricut. They will be similar to the premium cube logos from TC since they will be shaped like the logo, not just shaped like a center cap.

are you talking about the machine or some hole punches? because I'm not gonna get an entire machine to make two or three logos. I would just stick with a square logo like the lanlan ones.