Pyraminx Argentinian NR 2.82 + please help with broken MoYu Magnetic Pyraminx

[G2013]

I set the Pyraminx single NR at 2.82 seconds (super easy scramble, Genaro Sahib Leguizamón got a 1.6+2 with it D: ), and after that round my Pyraminx got somehow damaged.

I need your help this time:
The cube has one side (the yellow/green/blue "face") which turns horribly, the other 3 ones turn normally (actually I noticed that one of them is slightly "looser" despite the tensions being the same). I have disassembled, lubed, and tensioned the puzzle, yet the turning remains the same.
There is no visible phyisical damage, and I can't find the reason of the bad turning.

If any of you has experienced anything like this, please tell me what you did to fix it if you did fix it, or give me any tips on what I can try. I am not the first Argentinian to whom this happens, and none of the other 2 has found a reason for the bad turning.

Please help and thanks

EDIT: This is the scramble if you wanna try it:

B L' B L' R B' R B U' R L' r
Reconstruction:

Spoiler

[U'] // Inspection
U // Orienting centers
L U R U' R' //Inserting keyhole edge + LL skip
[L] u u //Solving tip very stupidily

 

[aybuck37]

I set the Pyraminx single NR at 2.82 seconds (super easy scramble, Genaro Sahib Leguizamón got a 1.6+2 with it D, and after that round my Pyraminx got somehow damaged.

I need your help this time:
The cube has one side (the yellow/green/blue "face") which turns horribly, the other 3 ones turn normally. I have disassembled, lubed, and tensioned the puzzle, yet the turning remains the same.
There is no visible phyisical damage, and I can't find the reason of the bad turning.

If any of you has experienced anything like this, please tell me what you did to fix it if you did fix it, or give me any tips on what I can try. I am not the first Argentinian to whom this happens, and none of the other 2 has found a reason for the bad turning.

Please help and thanks

Wow that's really fast!! Hmmm is that face oddly tighter than the others?

 

[asacuber]

The cube has one side (the yellow/green/blue "face") which turns horribly,

it has happened to me, after you do a few solves on it, it gets fixed and the pyra turns normally.
also isnt genaro the average nr holder?

 

[G2013]

Wow that's really fast!! Hmmm is that face oddly tighter than the others?

Genaro's solve is fast, indeed, mine is just "ok" for how DAMN EASY the scramble was lol

The face is tightened the same as every other face. I also tried to tighten it differently (tighter and looser) but the results were the same.

it has happened to me, after you do a few solves on it, it gets fixed and the pyra turns normally.
also isnt genaro the average nr holder?

Hm, I'll try and do an ao100 or something with it and I'll tell you then.
EDIT: Done and it's still the same :/ PS: it was 6.51 lol

And yeah, Genaro currently holds the NR for Pyraminx avg

 

[aybuck37]

Genaro's solve is fast, indeed, mine is just "ok" for how DAMN EASY the scramble was lol

The face is tightened the same as every other face. I also tried to tighten it differently (tighter and looser) but the results were the same.



Hm, I'll try and do an ao100 or something with it and I'll tell you then.

And yeah, Genaro currently holds the NR for Pyraminx avg

I got it! Look at all the screws really fast. At the bottom are any of them fraying in a slanted direction? I'm not sure if it's a problem but I noticed that in mine.

 

[G2013]

I got it! Look at all the screws really fast. At the bottom are any of them fraying in a slanted direction? I'm not sure if it's a problem but I noticed that in mine.

I'm not sure what you mean by that... like, they are a bit askew?

 

[asacuber]

I'm not sure what you mean by that... like, they are a bit askew?

Let me describe my experience:
I got a moyu magnetic pyraminx and thought of seeing the mechanism. So I disassembled an edge and split the parts, then i assembled it back. immediately i noticed the turning of that particular top was different.
The next day, i did a few solves it went back to normal.
Try lubing it with a heavy lube. I don't think it will work, but its definitely worth a try

 

[xyzzy]

No idea how the magnetic pyraminxes work, but is it possible that some of the magnets somehow ended up with the wrong polarity?

 

[G2013]

Let me describe my experience:
I got a moyu magnetic pyraminx and thought of seeing the mechanism. So I disassembled an edge and split the parts, then i assembled it back. immediately i noticed the turning of that particular top was different.
The next day, i did a few solves it went back to normal.
Try lubing it with a heavy lube. I don't think it will work, but its definitely worth a try

The "doing solves" idea didn't work, I already did +100 solves and it's still the same :/
I'll try with different lubes and tell you

No idea how the magnetic pyraminxes work, but is it possible that some of the magnets somehow ended up with the wrong polarity?

Hmm I really don't think so