V-Cube 4

My DIY has just arrived and before I assemble it I just want to comment that it is the same price as the ready to go version but without the packaging and they don't even bother separating out the screws springs and washers from the rest of the pieces.

I feel like the company thinks 'We are not trying to cater to you but if you want to give us your money then we will gladly spit in your food before serving it to you cold and on the floor".

I hope it's good =)
 
I don't feel that way. I think the packaged version is strange - kinda boxed like a fancy shaving cream or some other men's product. With the DIY version I think they saved me a lot of time... I didn't have to take the cube apart! And I got extra pieces and springs and stickers. Normal version got a box to throw away or clutter up their life and no extra parts or springs. Do they even get extra stickers?

I hope you get as many extra pieces as I did.

Could have delt with seeing the pamphlet

Just an update after having this thing for a week... It wears in nice.
 
Last edited:
I've put the pieces together now and with 3 sets of springs and 2 sets of stickers I guess it's not so bad.
I assume the ready to go doesn't have washers either. Luckily I had loads lying around from other cubes. The pieces are of the high quality I've come to expect from V and no excess plastic on the pieces (the word escapes me).
Are the hard springs generally considered the best?
 
I just replaced the medium springs for the hard ones again LOL The cube is breaking in and I would need to put in three washers now.. so.. I figured let's see where this goes and put the hard ones back in now.

Yeah, the price is the same, and yeah the stuff is ALL in the baggie, but it isn't too big a deal to sort them out at all. I mean.. core screws springs.. not like you can confuse those with cubies now *giggle*
 
xcube: don't have that

SS modded: much better than the SS
I don't much like the konsta + florian modded SS, so I ordered a new one for just the konsta mod, that one I did like ok, but it has MUCH less corner cutting ability than the v-cube4

SS unmodded: SS is smoother, but them slices...


So I have to wait for the new SS to come in and that a Konsta mod can be done again to make a proper comparison. But I liked them rather equally with just Konsta. The SS is much smoother in turning, the v-cube to me reminds me a bit of a shapeways puzzle for some reason.

If I have to pick one, I pick the v-cube at this point.
 
I don't have an x cube so I don't know.

Unmodded Shengshou is only a distant and unreliable memory for me, I can't say other than I modded it for a reason.

My Consta + FLorian + a little bit more modded SS v3 that I am super proud of = GoHong 4x4 (it is loosy goosy goodness)

Broken in Vcube 4 = Zhanchi. The comparison breaks down a little in that the vcube still does a few catches but generally it's become very good.

By most objective measures my modded ss4 should be better but the vcube 4 is what I'm using right now and the cube control I"m practicing makes the solves on my modded SS better when I go back.
 
Last edited:
I finally got my v-cubes (I got both the black and white collections and they sent me two white ones, but that is for a different thread) and my 4x4 got caught like the 6x6 for a few solves... I had the strong springs and screwed in all the way, so I found that odd. It works now, but the cube is really catchy still, much less thn the other springs, but still is catchy. The screws are all straight and the center pieces are in the right spots on the core. Anyone know what's up?
 
I figured it out... I should have read through the thread. It is the center pieces catching on the pi mod quarter circle things... It happens a lot when I corner cut. Having played with it for a while, it certainly has helped a lot more than I thought, but it still is very annoying. Has anyone tried any mods that have fixed or greatly reduced it?
 
Well.. you can find this in the thread also, mention of filing off a bit from the centers, and filling with sculpt or milliput.

I sufficed with dropping a bit of lube on one or two of the alignment stalks.


Are the faces flat by the way? I know this sounds strange but when the screw is not in far enough the centerpiece comes up a bit resulting in much more catching.
 
1st impressions are good. Feels like a smoother X cube but hasn't popped or exploded yet. Centre caps do keep coming off during parity algs though.
I have all the screws set as tight as possible (which isn't very tight at all) but one axis is a lot looser than the others so I'm not sure what I can do about that.
It does 'catch' at the moment but it is so minimal that I hear it but can really feel it. I need to get used to the 3x3 stage but once I am I'm sure I'll drop below my D+M 6.6 average.

Overall I'm happy especially since everyone is saying it improves with breaking in. I would still prefer a Dayan + MF8 like the v1 but 6.0cm and doesn't pop though.

edit - just had my 1st pop and it's not pretty. I was hand scrambling stupidly though.
 
Last edited:
Centre caps do keep coming off during parity algs though.
Easily sorted by gluing those caps onto their respective counterparts. I have done that with one red.

I have all the screws set as tight as possible (which isn't very tight at all) but one axis is a lot looser than the others so I'm not sure what I can do about that.
Which springs do you have in there at the moment? Sounds like the mediums. To get more tightening room you can add washers to that particular one that is a lot looser, or put a tighter spring in there.
 
I've got the hard ones in and am reluctant to glue the centre caps on but I think I'll have to. I've only had 1 solve so far when 2 came off so in comp I would have to put one of those back in.
I'll try adding washers.
 
Why would you be reluctant to glue the caps on? It is not like there is a screw under the caps :) They are supposed to be one piece after all, just that it is easier with the mold most likely to make them two pieces. :)

I put a tiny dab of super glue on the two stalks and pushed the cap on. Do make sure you push it all the way down. I'd just do those that pop off, for me it stayed limited to the one. Wait and see what else decides to come off lol


Hopefully the washers will help. Amazing.. the difference between two cubes. I am currently heavily breaking in mine with the hardest springs in there and tensions set as loose as possible and someone else would say "dang this is a tight cube" where your cube would be considered loose.

I wonder what the difference is!
 
Back
Top