READ WHOLE THING NOW!!!
Okey so I showed concept in this idea thread a while ago and I was too lazy to write it down. So let's say it's my method, I am kudz so k3 will be fast to say and nothing like k4 so let's call it like this
Pure method steps:
1. EO+FB
2. SB+CP
3. 2GLL+FD&BD
But, method would be pointless, if that would be all. So let's start. I always enjoy learning new methods (even for 4x4), so when I couldn't even cfop well, I knew petrus, ZZ and Roux). This method is kinda hybrid of big 4 and got few variants.
So method isn't that hard the biggest issue is CP while LS. Ofc while usig non-Roux variant you can simply do ZBLL.
So for me this method would go like this (Petrus/ZZ)
Best option imo
1. EO+FB
2. FD+BD+2x2x1 block (part of SB)
3. LS+CP
4. 2GLL
This is speedsolving method, the only pause in solve should be on last pair.
I might miss sth gonna edit later
I am going to add vid/examle solves/CP reco(more than now)/maybe some avg
pls halp w movecount
it is usable
rly ;_;
~me ( ͡° ͜ʖ ͡°)
Okey so I showed concept in this idea thread a while ago and I was too lazy to write it down. So let's say it's my method, I am kudz so k3 will be fast to say and nothing like k4 so let's call it like this
Pure method steps:
1. EO+FB
2. SB+CP
3. 2GLL+FD&BD
But, method would be pointless, if that would be all. So let's start. I always enjoy learning new methods (even for 4x4), so when I couldn't even cfop well, I knew petrus, ZZ and Roux). This method is kinda hybrid of big 4 and got few variants.
So I can't manipulate much in EO and FB for me is a Roux block, but using only R,U,L,D moves(other moves too, but only like F2 to save EO).
Let's say that FB is done on left. I think that planning it is possible at preinspection, at least partly
Let's say that FB is done on left. I think that planning it is possible at preinspection, at least partly
Okey so basically I would do 2x2x1 block and than insert last pair (most likely FR) while doing CP. This is Roux variation. It leaves us with FD and FB edges unsolved. This is kinda unfortunate, cut it leaves us with whole M layer unsolved. '1LLL' is possible but there are too many algs (imo). So inserting FD and BD on place will reduce amount of algs. Since EO is done just doing block FD-center-BDwill reduce cases much. Doing additional M2 move will reduce cases to just 50%.
So now we got two cases
2GLL- nice 2gen cases
2GLL+M2U2M2. I think this can be learnt as well or just do M2U2M2
I don't like this variant of k3, cuz doing this FD-center-BD block after SB is not that good imo
So now we got two cases
2GLL- nice 2gen cases
2GLL+M2U2M2. I think this can be learnt as well or just do M2U2M2
I don't like this variant of k3, cuz doing this FD-center-BD block after SB is not that good imo
I like that one better. So wouldn't I do this FD-BD cases while doing SB? Just add M2s to some R move (so sometimes Rw2 R') to solve them. Then insert last pair with CP. 2GLL to end. Now sth more about those 2 edges.
First my solve 2 months ago. Yes, I know that CP was done from start. 1st step done.
Scramble: R U R U2 R U2 R U2 R U' R2 U R2 U2 R' U' R U' R U' R2 U R' U' R2 M2 U' M2 U M2 U Rw2 U R' ofc i added M2s, just for my need
Solution:
2. R' Rw2 U' R' U2 R' U2 Rw2 U' R U R'
3. U R U' R'
4. R U' R' L' U2 L U L' U L R U2 R'
AUF: U'
alg.cubing.net =)
Now what I did:
2. R' Rw2 U' -solved D edges, while doing red-blue pair set up
R' U2 R' U2 - SB-LS
Rw2 U' R U R'- do pair
3. U R U' R'- CP
4. R U' R' L' U2 L U L' U L R U2 R' - 2GLL, now I would use different alg tho
AUF: U'
So just, while doing this SB we can easily solve those edges. Bigest problem here is M2U2M2, but here this adds 1-2 moves to solution. I like this variant v. much
First my solve 2 months ago. Yes, I know that CP was done from start. 1st step done.
Scramble: R U R U2 R U2 R U2 R U' R2 U R2 U2 R' U' R U' R U' R2 U R' U' R2 M2 U' M2 U M2 U Rw2 U R' ofc i added M2s, just for my need
Solution:
2. R' Rw2 U' R' U2 R' U2 Rw2 U' R U R'
3. U R U' R'
4. R U' R' L' U2 L U L' U L R U2 R'
AUF: U'
alg.cubing.net =)
Now what I did:
2. R' Rw2 U' -solved D edges, while doing red-blue pair set up
R' U2 R' U2 - SB-LS
Rw2 U' R U R'- do pair
3. U R U' R'- CP
4. R U' R' L' U2 L U L' U L R U2 R' - 2GLL, now I would use different alg tho
AUF: U'
So just, while doing this SB we can easily solve those edges. Bigest problem here is M2U2M2, but here this adds 1-2 moves to solution. I like this variant v. much
So method isn't that hard the biggest issue is CP while LS. Ofc while usig non-Roux variant you can simply do ZBLL.
This was under work and I found sth nice, but I forgot it. Gonna edit it.
From that what I remember easiest reco was from angle where pair is solvable with RU2R'.
My reco system was sth like this.
-Look at WV (too see which colours matters) if, I know WV I can predict OCLL too =)
-Reco CP by looking on 3-4 stickers, can't remember which ones tho XDDDD
Gonna find it and edit it
From that what I remember easiest reco was from angle where pair is solvable with RU2R'.
My reco system was sth like this.
-Look at WV (too see which colours matters) if, I know WV I can predict OCLL too =)
-Reco CP by looking on 3-4 stickers, can't remember which ones tho XDDDD
Gonna find it and edit it
So for me this method would go like this (Petrus/ZZ)
Best option imo
1. EO+FB
2. FD+BD+2x2x1 block (part of SB)
3. LS+CP
4. 2GLL
This is speedsolving method, the only pause in solve should be on last pair.
-Low movecount(could sb count it pls?)
-After 1st step '2gen' solve (not counting CP and Rw and R is kinda same)
-After 2nd step 2gen for sure
-Nice to lookahead and fingertrick
-'1LLL'
-Nice to switch from everything in big 4
-After 1st step '2gen' solve (not counting CP and Rw and R is kinda same)
-After 2nd step 2gen for sure
-Nice to lookahead and fingertrick
-'1LLL'
-Nice to switch from everything in big 4
-Roux variant requires a bit more algs and practice and is probably worse
-CP reco (or I will find that better one, which i knew for 2 days :/)
-Many algs
-Hard time in preinspection
-1st step is hard to plan (doable imo in 15s)
-Too intuitive for me
-CP reco (or I will find that better one, which i knew for 2 days :/)
-Many algs
-Hard time in preinspection
-1st step is hard to plan (doable imo in 15s)
-Too intuitive for me
I might miss sth gonna edit later
I am going to add vid/examle solves/CP reco(more than now)/maybe some avg
pls halp w movecount
it is usable
rly ;_;
~me ( ͡° ͜ʖ ͡°)
