Dayan Tengyun V2M GIVEAWAY! Insta & YT: AlohaCubed AlohaCubed

[EvanTheCuber]

YES! MY TENGYUN V2 M ARRIVED! SO DID MY XS!

 

[Etotheipi]

YES! MY TENGYUN V2 M ARRIVED! SO DID MY XS!

Eyyyyy!!!! what are your thoughts?
I looked at a review video, and when the people in the comments ask how to compares to other flagships, the person said it was better than all other flagships and it was his main, that's promising XD

 

[PetrusQuber]

Yeah, SCS has done a video.

 

[MJS Cubing]

I Ordered from SpeedCubeShop and the inside looks white. You can make it black?

No. The internals are primary, and some people say it makes the cube better than black or sticker less internals. It's common in a lot of cubes. If you don't like it, get a cube that doesn't have them like the GTS 2, 3, WRM, Gan cubes, or the Valk M.

 

[Etotheipi]

No. The internals are primary, and some people say it makes the cube better than black or sticker less internals. It's common in a lot of cubes. If you don't like it, get a cube that doesn't have them like the GTS 2, 3, WRM, Gan cubes, or the Valk M.

Ot just suck it up cause the tengyun seems like its gonna be really great. XD

 

[Sub1Hour]

No. The internals are primary, and some people say it makes the cube better than black or sticker less internals. It's common in a lot of cubes. If you don't like it, get a cube that doesn't have them like the GTS 2, 3, WRM, Gan cubes, or the Valk M.

The Wrm and GTS3 have primary tracks but the species themselves are fully colored. They are 3 piece edges and 4 piece corners so the feet are primary. I can't tell the difference between primary and black internals myself but be aware of that also.

 

[PetrusQuber]

Jeez guys, all this talk over a misinterpretation lol.

 

[MJS Cubing]

The Wrm and GTS3 have primary tracks but the species themselves are fully colored. They are 3 piece edges and 4 piece corners so the feet are primary. I can't tell the difference between primary and black internals myself but be aware of that also.

Well, you can't see the primary tracks.

 

[Sub1Hour]

Well, you can't see the primary tracks.

And that makes what difference? The feet of the pieces have the most intricate contact on the GTS3 and WRm. Also the X and 354 v1 have primary feet as well. Not sure about the M, XS, or 354 v2 though.

 

[MJS Cubing]

And that makes what difference? The feet of the pieces have the most intricate contact on the GTS3 and WRm. Also the X and 354 v1 have primary feet as well. Not sure about the M, XS, or 354 v2 though.

He's complaining about the look of the caped peices.

 

[Sub1Hour]

He's complaining about the look of the caped peices.

Oh, I see. I know some people that hate the feel of primary cubes but I can't tell if a cube is primary or not without looking. Yeah, ignore what I said about the GTS 3 and WRm.

 

[BenChristman1]

I actually really like the look of primary internals. The only cubes that I have that have primary internals are my Valk 2, 4, and 5, my X-Man Volt (v1), and on the centers of my X-Man Bell. I am hoping to get a Tengyun v2 sometime soon.

 

[PetrusQuber]

Anyway, the Tengyun outer edges are stickerless/black. Look in SCS’s vid, skip to the magnet adjustment system bit, you’ll see what I mean.

 

[EvanTheCuber]

Eyyyyy!!!! what are your thoughts?
I looked at a review video, and when the people in the comments ask how to compares to other flagships, the person said it was better than all other flagships and it was his main, that's promising XD

I don't know yet, I have to disinfect it. In 10 minutes, I can unbox my Tengyun V2 m, GAN 356 XS, Little Magic, and Little Magic 2x2. Very excited!

Edit: The tengyun Box Looks SICK.

Edit2: VERY disappointed with my GAN 356 XS, Tengyun V2 M is pretty good.

 

[MarkA64]

Are the edges and corners one piece like in Gan cubes or are the caps removable? This cube looks really nice.

 

[EvanTheCuber]

If you thought getting the center caps removed from the GAN cube, then the Tengyun is 10x harder.

Edit: Sorry to be a downer, but I don't really like the Tengyun. Its way to sandy, blocky, and unsatisfying to turn for it to be my main. My main will probably be the XS because I realized it was just super tight.

 

[Sub1Hour]

If you thought getting the center caps removed from the GAN cube, then the Tengyun is 10x harder.

Edit: Sorry to be a downer, but I don't really like the Tengyun. Its way to sandy, blocky, and unsatisfying to turn for it to be my main. My main will probably be the XS because I realized it was just super tight.

How does it compare to the v1?

 

[PetrusQuber]

If you thought getting the center caps removed from the GAN cube, then the Tengyun is 10x harder.

Edit: Sorry to be a downer, but I don't really like the Tengyun. Its way to sandy, blocky, and unsatisfying to turn for it to be my main. My main will probably be the XS because I realized it was just super tight.

Then try loosening it? And maybe lubing?

How does it compare to the v1?

I don’t think he has the V1

Are the edges and corners one piece like in Gan cubes or are the caps removable? This cube looks really nice.

The caps are removable but apparently quite hard to remove.

 

[Kaneki Uchiha]

Then try loosening it? And maybe lubing?

I don’t think he has the V1

The caps are removable but apparently quite hard to remove.

I thought u were going to make a review on one????

 

[PetrusQuber]

I thought u were going to make a review on one????

I haven’t got it yet...