4x4 Parity...

[slncuber21]

ok i have a 4x4 problem and i dont know if it is parity or not. this is for the first layer corners...

(color scheme)- green on bottom, yellow on front, red on right.
(problem)- green on bottom, yellow on right, red on front.

if you have any tips, it would be great!

 

[AvGalen]

No, this is not because of parity.

It is because you didn't put the centers in the correct location (if I am understanding you correctly)

Because the centers are not fixed on 4x4x4, 6x6x6, 8x8x8, etc you have to make sure that you put them in the correct order/position. If you don't, the corners will not match them and you cannot finish the cube with the "reduction" method.

 

[Cerberus]

Galen is right, and if you got the whole rest of the cube solved and don't want to mess up anything, i would advice you
r' U l U' r U l' U'
4 times (you got to rotate U and B a bit between each)

 

[slncuber21]

ok thanks! i fixed it

 

[jackolanternsoup]

you have an interesting colour scheme.... all the cubes i;ve seen have left-red front-green up-yellow...

 

[TimMc]

Heh, I primarily use the color scheme:

U Blue
D White

Then Red Yellow Orange Green for LFRB.

When using the 4x4x4 I tend to just remember RYOG to solve the centers from left to right...

Tim.

 

[slncuber21]

that could be useful tim, i might use that