MoYu Weilong V2 Discussion & Personal Reviews

Just got the mini one today. The cube is heavier than my mini f/s and my 57mm Zhanchi, so it'll kinda take long for me to get used to it. Out of the box, it locks up quite a bit. I loosened all sides by almost 1.5 full turns from stock tensions, that setting is comfortable for me. I'll lube it tomorrow and break it in a bit more maybe. Which lube works best for this? For core and pieces separately?
 
From my experience Maru only lasts at most a few days on its own, but when you mix it in with diff oil/Lubix it'll kind of mix in a bit and make the diff oil a bit faster maybe. Don't know what really happens to it since it looks like it beads up on the dff oil though. Maybe it dries out and the dried-up Maru mixes in.
 
kunparekh18 said:
Just got the mini one today. The cube is heavier than my mini f/s and my 57mm Zhanchi, so it'll kinda take long for me to get used to it. Out of the box, it locks up quite a bit. I loosened all sides by almost 1.5 full turns from stock tensions, that setting is comfortable for me. I'll lube it tomorrow and break it in a bit more maybe. Which lube works best for this? For core and pieces separately?
Click to expand...

Which one will be your main for OH? Also, can you compare the 3 cubes in terms of feel and performance?
 
Ive had all three moyus. And the V2 is the exact same mechanism as the V1. The V2 consequently feels exactly the same as the V2. Any discrepencies is simply due to the fact that all cubes (i.e. Comparing 2 V1s) and inherently different.

However, with that said, the mini feels incredibly skoother than the V1 and V2. When turning the V1/V2, you can "feel" the ridges of the pieces. With the mini for some reason, the cube feels very 'tight/close' and so it turns smoothly all the way round. I dunno if its just my cube but mine definitely feels smoother. Its actually convinced me to use the mini over the V2 due to the feeling (i prefer V2 size).
 
GnaCuber said:
Also, can you compare the 3 cubes in terms of feel and performance?
Click to expand...

The 57mm v1 and v2 are basically the same cube. The only difference is how the corners are put together. The feel and everything is the same. Obviously the v2 corners can split (and temporarily make the cube feel slightly less smooth until you make the corners go together correctly again) when you drop the cube on a corner just like all the other cubes that have corners split like that.

(rant) The mini v2 in my experience is a lot harder to tension and doesn't corner cut quite as much as the regular size weilongs. The mini v2 doesn't exactly feel like a weilong. IMO it feels a lot like an F2 with modern corner cutting abilities.
I'm very slightly disappointed in the mini v2 because corner cutting isn't quite as easy as the v1 (when doing OH solves). I lock up a lot more and get worse singles/averages because of the corner cutting "issue". I also over turn a lot because I was coming from a mini fangshi shuangren. When I don't get "lockups" due to the corner cutting/over turning, I get amazing singles (multiple 12.xx to 14.xx singles when I normally average ~18-20). I mostly wanted the mini weilong for OH and replace my fangshi illusion. I'm basically stuck between getting amazing singles (weilong) and consistent averages (fangshi illusion) and I would rather choose consistent averages for competition. (/rant)

I'm thinking about changing the springs in my mini weilong when I have time to something softer to see if it makes any difference. I'll post here if/when I do it.
 
That's a good point about the springs, perhaps they used regular 57mm springs in the smaller cube, which could lead to it being a bit different to tension.
May I suggest trying Fangshi springs? They're really soft compared to other types I've tried in spring swaps. In fact I might try it myself on my mini.
 
Lchu613 said:
May I suggest trying Fangshi springs? They're really soft compared to other types I've tried in spring swaps. In fact I might try it myself on my mini.
Click to expand...

I do have an extra set of mini fangshi springs.... I'll try that tomorrow or something depending on how much free time I have. I was going to put wittwo springs in it.
 
Slight bump

Mini weilong does not work well with wittwo springs, maru stock cx3 springs, or dayan springs. I've switched them back to stock mini weilong springs. Seems like it needs something slightly softer but the same length as the stock springs but not quite wittwo soft.
 
Does the moyu weilong feel square and stable? Im a roux solver and i need a fast, sqaure, and stable cube that does not easily flex.
 
You must log in or register to reply here.

Similar threads

I
  • Poll Poll
Moyu weilong v11 review
Replies
0
Views
1,276
Isaac Webb
I
bldcuber314
[Help Thread] Moyu Weilong WRM questions
Replies
4
Views
2,297
Sombi McJunior
Sombi McJunior
jun349
my moyu 'ultimate weilong' combination mod
Replies
3
Views
1,040
jun349
jun349
TheSpeedSkewber
3x3 Super RS3M V2 - Moyu Needs To Think.
Replies
6
Views
4,765
Dan the Beginner
Dan the Beginner
lawofthecube
  • Locked
(SOLD) 2-MoYu WeiLong WRM V9 3x3 (Ball-Core UV) cubes and (3) Dayan GuHong Pro M cubes - Almost New, Month Old...
2
Replies
21
Views
3,701
lawofthecube
lawofthecube
Back
Top