Maru CX3 - New 3x3x3

Well, the review is finally up.


Video note:
This was by far the most difficult video I've had to make. I absolutely love the cube, but I didn't want to be overly biased and just give it a favorable review because of my connection with it. Aside from school and work keeping me busy, I wanted to wait for other people's reviews to pop up first. I was scared my review might unintentionally mislead people. I guess what I'm really trying to say is...I was protecting all of you from me :)

After watching numerous reviews, most of them were favorable so I knew I wasn't completely delusional which is when I finally got around to scripting the video. That being said, just like any other product ever made, it's not for everyone. This cube didn't get an A because it's better than a ZhanChi. It got an A because it's better than a ZhanChi for ME.

I tried my very best with this review and the entire process as a whole. I hope you find the video amiable and I thank you all for your enduring support.

-Albert
 
Last edited by a moderator:
cyoubx said:
Well, the review is finally up.


Video note:
This was by far the most difficult video I've had to make. I absolutely love the cube, but I didn't want to be overly biased and just give it a favorable review because of my connection with it. Aside from school and work keeping me busy, I wanted to wait for other people's reviews to pop up first. I was scared my review might unintentionally mislead people. I guess what I'm really trying to say is...I was protecting all of you from me :)

After watching numerous reviews, most of them were favorable so I knew I wasn't completely delusional which is when I finally got around to scripting the video. That being said, just like any other product ever made, it's not for everyone. This cube didn't get an A because it's better than a ZhanChi. It got an A because it's better than a ZhanChi for ME.

I tried my very best with this review and the entire process as a whole. I hope you find the video amiable and I thank you all for your enduring support.

-Albert
Click to expand...

Nice review. I'm not really for crunchy cubes but I may eventually get one because yolo.
 
Last edited by a moderator:
Coolster01 said:
I have to say, I really love this thing after like a week. It is incredible and you can make it what you want. It can be really fast or really slow. The only thing is adapting to the crunchy feeling and the very loud sound is not easy.

As a side note, I have two of these, about to be 3.
Click to expand...

Can I have one?
 
Lchu613 said:
Speed compared to Weilong?

Still deciding between the two. BTW I want "uncontrollable". A cube that flies is a joy to use.
Click to expand...

From what I've heard, you'd want the Weilong. I think the CX3 is controllable and I've heard Weilong described as uncontrollable. But I only have the Weilong. I haven't tried CX3 to say with first-hand experience.
 
sneaklyfox said:
From what I've heard, you'd want the Weilong. I think the CX3 is controllable and I've heard Weilong described as uncontrollable. But I only have the Weilong. I haven't tried CX3 to say with first-hand experience.
Click to expand...

Honestly the weilong isn't uncontrollable once lubed and tightened. The CX3 can go incredibly fast as well. Really I'd say get both if possible. The weilong may be a tiny bit faster; but the cx3 is hands down one of the best cubes I've ever used.
 
kclejeune said:
Honestly the weilong isn't uncontrollable once lubed and tightened. The CX3 can go incredibly fast as well. Really I'd say get both if possible. The weilong may be a tiny bit faster; but the cx3 is hands down one of the best cubes I've ever used.
Click to expand...

This depends how you lube it. There isnt a cube that is uncontrollable if you fill it with 50k. A WeiLong with the right amount of around wt 30k diff oil is definitely not easily controllable. HOWEVER! I've noticed that a center piece modded zhanchi "flies" very freely and kinda feels very silky smooth when turning. With the WeiLong it kinda feels like you have it under control some times but then you dont. Both of my cpm milky zhanchis just turn very freely.
 
sneaklyfox said:
From what I've heard, you'd want the Weilong. I think the CX3 is controllable and I've heard Weilong described as uncontrollable. But I only have the Weilong. I haven't tried CX3 to say with first-hand experience.
Click to expand...
The CX3 is my main and I used it in competition allready. Indeed it is more controlable and what I like the most is that I have a better look ahead on it. The MoYu Weilong is also a great cube and for sure not worse than the CX3. The sound gets better after 2000 solves or so. It needs lube more often. I use silicone weekly and Maru lube daily. My MoYu get their lube maybe once a month and stay super fast as allways.
 
Last edited:
VieuxBat said:
Just receive mine, the design looks good and feels like, to my opinion, a weilong/lingyun. I don't like it, the pieces look like they haven't been molded properly, some of the corner pieces don't match alignement (the 3 pieces when assemble are not flat), it feels really unstable maybe due to the center being smaller than the other piece, and it is hard to tension, I like my cube looser and I can't put it to the tension I like without piece popping out (problably due to the center again). Good work Cyoux, sorry that Maru did a poor job, again my opinion, on you cube.
Click to expand...



You must like your cubes SUPER loose if you need it so loose that it pops. This cube, like the WeiLong, should never pop.
 
yockee said:
You must like your cubes SUPER loose if you need it so loose that it pops. This cube, like the WeiLong, should never pop.
Click to expand...

I have the Cx3 so thight that 45 degrees corner cut is not easy. Yet I get still a pop every 100 solves or so.. I never get pops on Dayans and Weilongs so I must say the CX3 is more prone to pops than I was expecting. About the same as with my Fangshi Shuangren V1. Maybe I just need to tighten a slight bit more.
 
windhero said:
I've contacted fasttech so many times without results; Did they reply with something like this?


"Thank for your interest. We have added it to our to-do list and it will be updated once it is here. But it takes some time."

That's what they answered to me 7 weeks ago when I asked if they could sell their shengshou products separately, not in bulks of 2x2-5x5 and so on. They still have not changed it and they have all of those cubes stocked.
Click to expand...

I've also just yesterday, asked them to sell SS stuff separately, as well as the CX3 and the SS 10x10 when it comes out.


MarcelP said:
I have the Cx3 so thight that 45 degrees corner cut is not easy. Yet I get still a pop every 100 solves or so.. I never get pops on Dayans and Weilongs so I must say the CX3 is more prone to pops than I was expecting. About the same as with my Fangshi Shuangren V1. Maybe I just need to tighten a slight bit more.
Click to expand...

Wow, that's crazy! It shouldn't pop!
 
MarcelP said:
I have the Cx3 so thight that 45 degrees corner cut is not easy. Yet I get still a pop every 100 solves or so.. I never get pops on Dayans and Weilongs so I must say the CX3 is more prone to pops than I was expecting. About the same as with my Fangshi Shuangren V1. Maybe I just need to tighten a slight bit more.
Click to expand...
What kind of piece(s) usually pop out, and doing what type of movement?
 
My cx3 has gotten better and better since I got it.
Out of the box it was a little rough. It felt a little squeaky (like my x-cube4). I ended up removing some flashing from the centers. For lube I put two drops of maru lube in each side. I planned to try Jigaloo if the maru lube didn't help it wasn't needed.
I've gotten two 16.xx on it, a personal best.

I also have control problems on the weilong. The d layer wants to wiggle on me.
 
I've gotten pops with the cx3. It usually happens when I try to push the reverse corner cutting too hard and the edge in the back pops out, sometimes with catastrophic results. This becomes less common with tighter tensions.

Overall, I love the cube. I still prefer the feel of my weilong, but the cx3 is at least on par with any other cube out there.
 
You must log in or register to reply here.

Similar threads

M
  • Poll Poll
[Review] Maru CX3 3x3x3
Replies
16
Views
7,955
rebucato314
rebucato314
L
Maru CX3 DIY Troubles
Replies
9
Views
1,714
ccownerful
C
MarcelP
Mini Maru CX3 (S-6) Unboxing
Replies
14
Views
3,328
MarcelP
MarcelP
theace
A (very overdue) Maru CX3 & SS Mirror Block Review
Replies
0
Views
779
theace
theace
R
  • Locked
Buying transparent Maru cx3
Replies
2
Views
1,018
rubiksguy
R
Back
Top