Your thoughts on ShuangRen

Do you think the ShuangRen will replace your main

  • Yes, it allready better than my main

    Votes: 36 31.3%
  • No, my current main is much better.

    Votes: 26 22.6%
  • I don't know yet

    Votes: 53 46.1%

  • Total voters
    115
Are other people having lack of corner cutting issues?

No, mine corner cuts 45 degrees easily without any force both ways..

I do not know what to think of the cube any more.

Plus:
-My Averages are great.
-No lock ups
-Great corner cutting

Down:
-My nails get under the edge caps
-Corner twists every 5 solves or so
-That damn sound
-It feels slow although the times show otherwise.

Maybe it is just getting used to the cube. But I feel after doing a few solves on the ShuangRen, every other Dayan feels awesome.
 
I love that the "Dayan has lost its throne" idea is already being thrown out the window after the ShuangRen has been out for a few days. People need to realize that hype exists to sell cubes, and CBC has a habit of exaggerating when it comes to new and rare cubes that only he has. Hopefully there's a lesson in this, and people will learn not to buy into the hype and to make judgements for themselves before making strong declarations like "the ShuangRen will replace the zhanchi".

the majority of the CBC audience is prepubescent anyway, so history will repeat itself in the very near future
 
*chuckles* the ones that hang on his every word yeah

I like his vids because they are clear and I can see very well what pieces and such look like, sounds a cube makes, and performance.

Hmm to think of it.. pretty much all the channels I am subscribed to have that..

In any case.. I like to SEE what I am buying. An opinion on things I will form on my own.

I can at least be fairly certain that corner cutting on the moyu won't be an issue lol. It is not the main thing that I judge my cube by, but it is measurable, and the Fangshi before the spring swap was blegh. Now it is ok. Measures up with the SS wind and such. Definitely not with a Guhong or Zhanchi. But that is MY opinion. YMMV :)
 
No, mine corner cuts 45 degrees easily without any force both ways..

I do not know what to think of the cube any more.

Plus:
-My Averages are great.
-No lock ups
-Great corner cutting

Down:
-My nails get under the edge caps
-Corner twists every 5 solves or so
-That damn sound
-It feels slow although the times show otherwise.

Maybe it is just getting used to the cube. But I feel after doing a few solves on the ShuangRen, every other Dayan feels awesome.

Averages getting better is a sign of a better cube. When I swapped to Dayan Guhong V2 from random C4U cubes my averages got better. Later on when I got used to the cube my personal best dropped loads and the averages kept on falling.

What's your standard deviation of solves with the Shuang Ren and with your Dayan? (If you dont know try doing like 20 solves on qqtimer.net with both cubes and paste the σ value here)

That data would explain a lot. A low standard deviation basically means a good flow and steady solves, thats what helps to lower the averages as well. High standard deviation usually means lock ups (or pops but that doesnt happen with cubes that have a torpedo mechanism). Corner cutting and stuff like that is not worth looking for imo, as long as the corner cuts over 40 degrees or so.
 
I tried one at a comp yesterday, and have to say, I really like it!

What times did you get?

What's your standard deviation of solves with the Shuang Ren and with your Dayan? (If you dont know try doing like 20 solves on qqtimer.net with both cubes and paste the σ value here)

I will try that and let you know.
 
Tightness or looseness of the cube is a matter of the spring tension when the cube is in its resting position.

Corner cutting is about how much room the cube has to compress the spring.

These are not incompatible things, you don't have to give up one in order to get the other. I do these sorts of modifications on my big cubes all the time.

If the cube is too loose when you've got the screws out far enough to allow good corner cutting, then instead of tightening the screws, y'all need to replace the springs with new springs with a higher spring constant.

A thing I might try is to stretch a spring. That will increase the precompression on the spring without reducing the amount of travel available in it.

Also, when a cube's center pieces don't have a notch to allow easy removal of the center caps I file a notch. And when they only have one or two notches, I file new notches on the other sides. I don't like having to hunt around to get the caps off.
 
Last edited:
Ok, I did two Ao25's. One with my current main (a Zhanhci Milky) and the other with my white Fangshi:

I was very surprised to see that I had better times with the Fangshi! I started with the Fangshi without warm-up so that should have been in favor of the Zhanchi. Still did the Fangshi win. This does actually make me feel better about the cube. Today I have washed out all lube and did only apply lube to core, It runs so much better now. Lube makes my Fangshi slow. And it is getting broken in. The sound is getting better (more quiet).

Fangshi

Mean: 26.65
Average: 26.52
Best time: 22.03
Median: 25.97
Worst time: 34.32
Standard deviation: 2.95

Best average of 5: 24.13
9-13 - 23.46 (22.09) 23.67 25.25 (27.34)

Best average of 12: 25.79
8-19 - 27.89 23.46 (22.09) 23.67 25.25 27.34 29.01 25.86 24.51 25.19 (34.32) 25.76

1. 29.56 D F2 L2 F2 D U2 F2 U R2 U' B' D R L2 D U F2 L2 D' B
2. 24.17 D2 L2 D2 L2 B2 U' B2 R2 D B2 F2 R B R2 L' D2 R' F' D2 B2 U2
3. 26.26 U R2 U' B2 D F2 D2 L2 U F2 D2 L D F' L U' B U' B2 R2 F2 U
4. 29.15 F2 U B2 D F2 D' R2 F2 R2 D' F2 R' D B' L' B F' L U' B' F2 L2
5. 26.99 R2 U F2 D2 R2 D' B2 F2 D' R2 D' L D2 L D F R' L F' R' B'
6. 30.88 B2 D' R2 D' F2 D2 R2 U' F2 L2 U L U' B2 F' R2 U2 B' R' L' B U
7. 27.03 D2 R2 L2 U R2 U2 L2 F2 U2 F2 U2 B' F' U' B L' U L2 D B' R'
8. 27.89 F2 R2 F2 D2 F2 D R2 U2 B2 L2 F2 L' F2 D' U B' D' F2 L2 D F
9. 23.46 R2 B2 U F2 D' B2 R2 D R2 F2 D2 R U2 F' D' B2 F' L' D F2 R2 U'
10. 22.09 L2 U2 R2 U' B2 D2 B2 U B2 U' B L' D R2 F D2 B' R' D' U2
11. 23.67 U' L2 D' B2 D L2 F2 D' B2 D U' L' U' F' D U' L B2 F D' B
12. 25.25 R2 B2 L2 D' R2 D F2 U2 F2 R2 D' R F2 D F L' B' D2 B L' F2
13. 27.34 D' F2 D L2 D' F2 D' B2 F2 U B' D' U' R' F' R2 U B D2 L
14. 29.01 L2 U' R2 U2 F2 U' B2 R2 U' F2 R2 F R' F2 L2 B2 D2 U' F2 L' B U
15. 25.86 D2 B2 D U2 B2 F2 L2 D' F2 U R' B' D R D F' U B' D U2 L
16. 24.51 B2 R2 D B2 D' L2 D2 L2 U F2 D' L B' D L B L B2 F' U' B U'
17. 25.19 D' B2 R2 U' R2 D' U2 R2 B2 D' F2 R' L U' B' R2 B' D B' U R2 U2
18. 34.32 L2 U' R2 B2 D' L2 U' B2 R2 L2 U' F R' U' R2 D2 L B2 L D
19. 25.76 D2 F2 R2 F2 R2 U' L2 U B2 R2 U F' R' D' R2 L' D L B' U' F
20. 32.40 U' F2 U F2 L2 F2 D' U2 B2 D F' L D2 U' F2 R' U' R' F' D2 L
21. 22.03 U2 R2 U R2 U2 F2 D R2 L2 D' F' D L2 D F2 L2 D' L F R D2
22. 27.70 B2 D L2 D' R2 B2 L2 U' R2 D2 R L U2 B D' L2 F D R2 L
23. 24.43 F2 R2 B2 F2 D' R2 L2 D2 L2 D2 F' D2 R L2 D B' F D U B' L' D
24. 25.35 L2 F2 U L2 F2 D B2 L2 D' R2 D2 B' U2 R' B2 F D2 U2 R D' U2
25. 25.97 U' L2 D L2 F2 L2 F2 U' F2 U2 B2 L U' R' F L D' B' L' U'


Zhanchi

Mean: 27.05
Average: 27.12
Best time: 19.59
Median: 26.77
Worst time: 32.75
Standard deviation: 3.10

Best average of 5: 25.31
15-19 - 24.88 25.27 (32.65) 25.77 (19.59)

Best average of 12: 26.44
5-16 - 28.57 (24.02) 25.59 28.10 25.84 (32.06) 27.01 25.47 27.02 26.63 24.88 25.27

1. 25.54 D F2 L2 U L2 U' B2 D B2 F2 U F L D L2 F2 U B D2 R2 D' R'
2. 26.98 L2 U' L2 F2 D L2 D2 F2 L2 D' R B' L2 F' L U' R F2 R' L2 U'
3. 23.56 U' L2 U' F2 D B2 U' B2 U B2 U B D B' R F2 U B2 F L B' U'
4. 32.75 D L2 B2 L2 U' B2 D R2 L2 B2 D2 F L2 U F' R B2 L F2 U' F2 U2
5. 28.57 F2 U R2 F2 U2 F2 U' B2 D B2 U L F' L' D2 F D' B2 R' L D'
6. 24.02 D2 L2 F2 L2 D' B2 D' F2 U2 R2 D B' R' F2 L B2 U2 B' R2 L' D2 U'
7. 25.59 D2 B2 U F2 D B2 L2 B2 L2 D' F2 R F' U R F2 R U' F U2 L U'
8. 28.10 D B2 D' F2 D L2 D2 B2 L2 B2 D R F2 D2 F R' D U' F U2 L' U2
9. 25.84 B2 L2 D L2 F2 U' R2 D2 B2 U2 F2 L' F2 R' F' U' B' L' D2 R L2
10. 32.06 L2 U' B2 R2 F2 D2 R2 F2 U L2 U' R' D2 U2 B2 U F' R' L' F L' U'
11. 27.01 B2 D B2 U F2 D F2 R2 U2 B2 F2 R B' R L' B2 F' U' R' D' B' D'
12. 25.47 D' F2 U F2 U' L2 D2 B2 U' L2 F2 R U' F' R' U L' B' D U F R'
13. 27.02 U2 B2 R2 U L2 F2 D B2 U2 L2 B' U' R F L U' R U B L' U2
14. 26.63 U' R2 F2 D' L2 U' L2 D' F2 U L' U2 R2 D L B F' R2 D' L' U2
15. 24.88 U2 B2 L2 F2 L2 U' R2 L2 B2 R2 L2 B' L' U F' R2 L' U' B D2 B2
16. 25.27 D B2 L2 U' B2 L2 F2 R2 U2 B2 D' L U' R L2 B2 D' U2 B L' F'
17. 32.65 D' F2 D' B2 F2 U' B2 R2 U' B2 L2 F L B' R2 D' R L D B2 L'
18. 25.77 L2 F2 U2 B2 U B2 F2 R2 D2 R2 U2 B' R2 L U2 R F2 U B' L2 F2 U'
19. 19.59 D F2 R2 U' F2 U' F2 D2 B2 F2 R2 F' R' L2 F' L' D2 R' B2 L2
20. 31.07 D R2 U2 F2 L2 F2 U' L2 U B2 U' R' B D' U2 B D U2 F' D R'
21. 26.77 D' L2 B2 D' F2 R2 F2 U' B2 D2 F R U2 B' D2 F2 L2 D F U2
22. 31.09 R2 D L2 F2 L2 U2 B2 L2 D2 F2 D F U2 L F D' R D2 L2 U' F R'
23. 28.10 R2 U' L2 B2 U B2 L2 U2 B2 F2 U' B' F D R' F' D U' F R' D2 U2
24. 28.83 F2 U F2 D F2 D2 R2 D F2 R2 B L U2 R U' R D2 L2 B2 D B' U'
25. 23.00 L2 U L2 D2 R2 D B2 F2 D' R2 D B R U B' L' D' U2 R2 L' U
ps, the solve 19 on the Zhanchi is sweet.. A few move X cross on red ;)
 
Last edited:
So far based on the data I've read it seems that the fangshi is favoured especially by people that solve atleast sub 20. Most of the fans of the Fangshi are sub 15. People above that prefer the Dayan. This is speculating since I have yet to even try the cube, but is it possible that the Fangshi is actually too fast for some people? Combined with how lightweight it is I can see how it could be hard to control. What divides people that are sub 20 and above it imo is the cube control. The flow during the solve doesnt just magically happen; It requires fast color recognition, fast fingers and more than anything accurate and fast planning during the solve mixed with accurate performance.

I'm stuck at +20sec average and I blame my sloppy style of solving. Getting rid of this by practising slower F2L and better look ahead.

Another thing is that Fangshi doesnt really like lubix-type lubes such as differential oil (in the pieces). This is probably because of the form of the pieces. All the gaps just eat the lube and it doesnt disperse within the puzzle as fast as it would in a puzzle such as a Zhanchi. The result is obviously the lube cumulating within the puzzle inside those gaps. Diff oil is sticky, so I see how the gaps that were left there on purpose to minimize contact points are useless and even worse if filled with sticky lube. The dayan pieces are solid and have a lot of contact points, which is why lubix-type lubes work well. In a cube with a lot of air in it and no contact points the diff oil just stacks up and slows the thing up. My plan is to lube my core with lubix/diff oil and drop a bunch of maru lube in the pieces, see how that works out.
 
Windhero: I am not going along with the "faster people like the fangshi because it is too fast for some people". My issue was never too fast, my main is faster. It was too loose. WAY too loose. Changing the springs solved that issue and it is now at least NORMALLY tensionable.

As for the lube bit.. with you all the way there on that theory and took my cube apart and washed the cubies. Left the lube in the core of course but the cubies are clean and lubeless now.. wait and see after they dry a bit how things will fare.
 
Oh, and I fixed the outsticking edge thingy.. I took all egdes out and applied about 220 lbs (my weight ;) ) pressure on them. And some of them made a snapping noise and it closed a gap. So the cube looks equally squared right now. And it affects the solves aswell. It turns better..

Windhero: I am not going along with the "faster people like the fangshi because it is too fast for some people".

I think he has a great point. Indeed the super fast people seem to like it a lot.
 
If I understand correctly, I should only lube the core, and nothing on the pieces? Also did I read that there are small yiny pieces of plastick sticking out everywhere that's catching?
 
If I understand correctly, I should only lube the core, and nothing on the pieces? Also did I read that there are small yiny pieces of plastick sticking out everywhere that's catching?

The plastic flashing was a problem of cubes done with a bad mold pre-mass production. That problem should be dealt with. However, the cube has some gaps (holes) in it, which is their design. This is why lubix-type lubes that are sticky do not work so well.

I dont see why maru lube or shock oil wouldnt work with the pieces, I'm going to give it a shot. Just dont put differential oil or lubix on the pieces. This is fairly obvious once you get your hands on the cube and see how the pieces are built.
 
The plastic flashing was a problem of cubes done with a bad mold pre-mass production. That problem should be dealt with. However, the cube has some gaps (holes) in it, which is their design. This is why lubix-type lubes that are sticky do not work so well.

I dont see why maru lube or shock oil wouldnt work with the pieces, I'm going to give it a shot. Just dont put differential oil or lubix on the pieces. This is fairly obvious once you get your hands on the cube and see how the pieces are built.


Thanks! Please keep us informed about the maru lube.
Once I recieve it, I'll only lube the core.

Oh, I just noticed, You're Finnish too :D
 
I reassembled and tensioned anew, much looser was possible now equaling the tensions on my main, finally, but still.. nope.

I just don't like the feel of it. It still wants to do stuff that I don't want it to do, which isn't to do with speed, but with it being flimsy.

My main cube feels sturdy where this one (again, at the same tensions) feels flimsy in my hands. Any tighter to get it more sturdy and it is too tight to my liking. Not a compromise I am willing to make.

I have to brush it down to personal preference.

It's likely going to boil down to the same thing we have between the zhanchi and the guhong. :)
 
Back
Top