Your thoughts on ShuangRen

Do you think the ShuangRen will replace your main

  • Yes, it allready better than my main

    Votes: 36 31.3%
  • No, my current main is much better.

    Votes: 26 22.6%
  • I don't know yet

    Votes: 53 46.1%

  • Total voters
    115
Thanks! Please keep us informed about the maru lube.
Once I recieve it, I'll only lube the core.

Oh, I just noticed, You're Finnish too :D
Oh look at that :D

My pack shipped from hknowstore 15th may, so it might take a while. I also just ordered Dayan hardware from the cubicle today and a white fangshi + a 100ml bottle of maru lube from fasttech.com that shipped 2 days ago.

I'm willing to guess that I'll have a "perfect" Shuang Ren in a week or two. Meaning a Shuang Ren with maybe a C4U core, Dayan springs, Half bright stickers and lubix in the core with maru on the pieces. See how that works out.

I'm gonna make a white one with half bright colours and do the same procedure with it once I get all the parts. I'm probably gonna even make a video even though it's not really my style.
 
Definitely will, I'll make a comparison video to the white Fangshi I also ordered. One black one with changed hardware and maru/lubix, one with stock pieces and only lubix in the core.
 
Right, so my black DIY Funs Puzzle just arrived today.

First I assembled it with a C4U core, dayan springs and Fangshi washers/screws. Dayan screws cannot be used at all as they are too short. The cube was way too tight, because the dayan springs are shorter and tighter. Also the center caps pop off if the tensions are too loose.

Then I took everything apart and put in a C4U core, Fangshi washers/springs/screws. Lubed the core very well, put the puzzle together and stickered them with super bright stickers made for 55/57mm dayan cubes. I dropped a little maru lube in the crevices. Result: The cube is really fast. It needs really good control for it to be great. The cube is definitely better than my well broken in stickerless Guhong v2, but I'm not good enough for it yet. I've been playing a lot of Borderlands 2 which apparently makes me suck at cubing, since my AO100 was 20.51 2 weeks ago and now its over 23 with a guhong.

Still waiting on a big bunch of C4U and Dayan hardware, another shuangren and loads of stickers.
 
Mine arrived today, but nobody was home to pick it up :( gotta wait 48 hours at the post office :/

I will probably put it together fully dry first. I'll be sure to list how each factor affects my cube when I'm done (with/without dayan hardware/cores etc.)
 
I am changing my opinion on the Fangshi. I do Ao12's changing between Fangshi and any other Dayan that I have and every time I get better results with the Fangshi. Some how after using Fangshi I lock up using even the most broken in Zhanchi. The Fangshi has a complete own league in 'not locking up'. And it's getting more and more quiet. I think I will start using it as my main and use it on the next competition in two weeks.
 
When my white fangshi arrives I'll be making an assembly video IF the cube has some flashing on it like my black DIY did. Most of the assembly videos do not show removing the flashing and how it might actually affect the puzzle. I'll show how the core works in more detail as well (core + center caps to be exact).

In my opinion you can only swap the core in the Funs puzzle. Anything else screws everything up. The puzzle is measured so that if the screws are longer or shorted the center caps either pop off or the puzzle gets too tight. Same with screws of different lengths. The Dayan core is the same spring, except it's more compact. It has basically just as many spirals as the ones on the fangshi, the difference is that the fangshi is longer because the gap between said spirals is longer making the whole spring looser and longer. Also the spring is made from a thinner metal which is the main reason why its looser. The washer on the fangshi are thinner and smaller as well. C4U core can be used if you want to be sure that the puzzle doesnt break in the long run as a consequence of the screws bending. All the rest should remain the same.

On mine the corner cutting is a bit more than 45 degrees, I'd guess 50-55 degrees. Reverse corner cut is half a cubie, easily. The corner either cuts very effortlessly or not at all. The puzzle doesnt lock up like the dayan, because the torpedo mechanism is different. In the dayans the sharp torpedo sometimes got stuck between pieces causing a lock up, in the fangshi the corner might just twist a turn. I've had the corner twist once and that was during a scramble when I'm more aggressive than during a solve.
 
I dont know about MarcelP, but I put a ton of pressure on all pieces one by one when assembling the pieces of the DIY kit. Enough to have my fingers hurt for 5 minutes after the assembly. I dont have that problem, the pieces stay together well (with the exception of the center pieces, cant take a cap of without separating the base from the middle part of the center piece. Bad design if you ask me)
 
I did the same as Windhero.. including the sore fingers.. yep. But you have to make sure to apply pressure all around the caps, just rotate the cubie around while you push until it is all nice and flush.
 
I squeezed the edges together. It's really good, but I'm not used to the feel yet. I need to do an avg100 with it. But that'll be tomorrow, after multiBLD (where this cube will be included)

I feel like I want to add some lube to the pieces. Any suggestions? (I have calvins high viscosity, 10k diff oil and maru)
 
I squeezed the edges together. It's really good, but I'm not used to the feel yet. I need to do an avg100 with it. But that'll be tomorrow, after multiBLD (where this cube will be included)

I feel like I want to add some lube to the pieces. Any suggestions? (I have calvins high viscosity, 10k diff oil and maru)

Nothing that is sticky. From those 3 the only lube that is runny is the Maru lube, right? Sticky lube just cumulates in the holes on the side of the pieces and slow the cube down instead of speeding it up.
 
Nothing that is sticky. From those 3 the only lube that is runny is the Maru lube, right? Sticky lube just cumulates in the holes on the side of the pieces and slow the cube down instead of speeding it up.

I'll try some maru now, thanks!

3 1/2 drops of maru lube and this cube is too fast for me. It does a U2 with one flick, and started to lock on me a bit.

E: It feels like it wouldn't beat my CPM-modded and well lubed zhanchi, but times say else. I don't know what to do :D
 
Last edited:
It's a good cube but I don't like it very much. I've had to slow down most of my algorithms to avoid catches. Of course, that's because of how I turn the cube, but I've never had to purposely slow down my turning to accommodate a cube before. It's almost as if the cube is holding me back.
 
Back
Top