V-Cube 4

Hmm I've been thinking about this for a couple of days now, I think that lubix would work just fine (or similar) but its more a question of where you put it in this cube than for most others.

I'm thinking that maybe between the inner midge and inner +centre could benefit the cube, and also on the base of the corners. I think the way the mech is held together will stop the lube from moving around as much, so where you put it matters much more. I'll try this in a bit and get back to you with the results.

I have tried it at various locations and cleaned the cube out between attempts. The only thing it DID sped up was the outer layers where the inner ones need the lube.. so the Rw Uw and such moves. But it slowed the inners down rather than sped it up.


Thanks SenileGenXer!


I wager you just drop a drop in one of the holes where F and R meet (so at its intersection), or in the hole where Fw and R meet (this all looking on U)

lol hopefully you can still follow.
 
Last edited:
Hmm I've been thinking about this for a couple of days now, I think that lubix would work just fine (or similar) but its more a question of where you put it in this cube than for most others.

I'm thinking that maybe between the inner midge and inner +centre could benefit the cube, and also on the base of the corners. I think the way the mech is held together will stop the lube from moving around as much, so where you put it matters much more. I'll try this in a bit and get back to you with the results.

Looking forward for your results!!

Cheers!
 
Thank you SenileGenXer for linking that, great review, going to finish watching when I get home again.

Oh.. I guess it got buried as I edited my post later, likely after you saw it, but where did you put the drops of Maru? :)
 
inside the cube. It really doesn't matter where you put it it is going to break into smaller and smaller droplets and work through the cube completely. I put a drop in the center crack and one droplet in the outer layer crack, but it's really good at distributing itself.
 
Ah ok, that is pretty much where I intended to drop it, so.. that is good. I saw a short review yesterday and the person warned NOT put in too much as it easily overlubes (just apply like two drops or so in a cube, max) and indeed said what you said: works itself in really nicely. Wears out quickly too, but that is ok, as long as it works lol!
 
OK so I did go off and put some Lubix-type lube in my cube, and it has improved the inner layers quite a bit. They now feel smoother and are a bit easier to start a turn with.
Basically I put some lube on the inside of the inner T-Centres, the bit that touched the centre piece, and I also lubed the inner surfaces of a couple of wings and that seems to have done it.
 
Glad to hear that that helped! I am waiting for the maru lube to show up and see what that does. If that doesn't do much then I'll try that inner layer lubing you described. Thanks!
 
Today I received my two V-Cube 4. One already assembeled and one DIY.
The already assembeled locks up like crazy. I can nearly not do two moves after each other without locking.¨
I really hope the DIY is better.
 
OK so I did go off and put some Lubix-type lube in my cube, and it has improved the inner layers quite a bit. They now feel smoother and are a bit easier to start a turn with.
Basically I put some lube on the inside of the inner T-Centres, the bit that touched the centre piece, and I also lubed the inner surfaces of a couple of wings and that seems to have done it.

Well done! I'm very glad to read your results. I'm going to lube with your method. I got my cube last wednesday, but i still don't open the package....to much to do these days at my work, but this weekend...oh men!

Thank you sir.

PD: which springs i should begin?
 
Last edited:
Fun thing to do with your v-cube 4. Trying to pop it and not popping it massively but ONLY popping one of those small internal pieces.

I didn't do this intentionally mind you.. I was cubing and doing some turn, and all of a sudden this piece was in my hand next to my cube. I was like: what?? *laughs*
 
Gordon I'm sorry your having trouble, keep us updated on how things are going for you.

I need to update my video to correct some inaccuracies. My vcube broke in very well and became not just my main but my favorite puzzle... but then on a lark I took the soft springs from the v4 and put them in my Shengshou 4x4. I didn't think it would work but I found I gave me a super fast barely controllable puzzle, just the kind I like the most.
 
Those li'l flimsy springs?

Dang too bad I only got 5 of those lol

Still waiting on the maru here but it's on the way. Wait and see :) And in the mean time a dry cube is turning just peachy, so.. no probs here :)
 
I have my v-cube 4x4 for over a week now and to be honest, i'm quite disappointed by it mostly because how often it locks up. Also, I've received the cube packed, after unpacking it i wasn't able to twist 2 sides of it and after opening the cube i've realised that whoever was assembling the cube, did a terrible job of just shoving the last few pieces in at random. I had to re-assemble and apply more pressure on the screws to be able to solve it, but still the cube locks up very often.
I was just expecting something better from this V-Cube
 
Does it feel too loose or too tight?

You might want to add washers if you don't have any other spring sets if the cube feels too loose (it locks less when it is a tad tighter, but it is a very sensitive tensioner).
 
Back
Top