Solution for Loose Clock Pins?

Daniel Wu

Premium Member
Joined
Jan 27, 2009
Messages
1,573
Location
Dallas, TX
WCA ID
2010WUDA01
Does anyone have a solution to loose clock pins. One of the pins on my clock was loose so I took it apart. It seems that the two metal rods that are supposed to provide resistance are not providing any resistance, hence the pin falling down. I've dug around a bit and the only solution that I could find was overlubing it. Is there an actual solution that works for this problem?
 
So I disassembled (which wasn't as hard as I thought it would be) and bent the pins. They are hardly bent at all but it makes a huge difference. The pins stay up when I put them up now. Unfortunately, they are much less smooth then they were originally (I expected that of course). The only concern I have is that this is only a short term solution. I have a feeling that the pins are going to widen the holes... but I guess I'll cross that bridge when I come to it.

I feel like there definitely should be a better solution.
 
I ended up sticking scissors in the corners where the wheels are and just prying it open. I'd wouldn't recommend that unless you're really careful though because I ended up breaking part of the front face of the plastic because it didn't break along the glue. I'd say to try this.
 
The only concern I have is that this is only a short term solution. I have a feeling that the pins are going to widen the holes... but I guess I'll cross that bridge when I come to it.


The main problem is that the holes of these chinese Clocks are skew, so they are widened when the pins are pushed.
In my experience there is no solution to this - apart from buying an original Rubik's Clock. :)
 
Back
Top