What did I do wrong?

MangoTangoFox

Regular
Joined
May 6, 2009
Messages
57
So I got my Lan Lan 2x2, 2 Guhongs (White & 6 Color), and a Shengshou 4x4, along with a bottle of Traxxas 50k Diff Oil.

So, out of the box, The lan lan and Shengshou where already almost good, while both of the guhongs where horrible. The 6-Color was pre-lubed with who knows what, and was comparatively better than the white one, but still not good.
So I took all 4 puzzles apart, and lubed the washers as well as the core, and then one dab for all of the pieces.

The lan lan improved in speed slightly. Both Guhongs went from crap (worse than my modded rubiks brand), to AMAZING! The problem then came with the Shengshou 4x4.
Originally it seemed dry, but had a nice crisp to it. "The sexy move" on the outer layer went very quickly with no lock ups, and the inner layers were good too.
But after lubing, the whole thing, especially the inner layers, seems sluggish.
And I have had it pop twice after lubing.
I heard that jigaloo, which I have a can of, is much better for bigger cubes, but i don't want to damage the pieces... And if I do use it, should I attempt to clean the "Lubix" out first? I cant even really feel it on the pieces, just a slight slipperiness.
Does lubix even deteriorate or evaporate over time? I only put 1.5x the amount I put in the other cubes, which was a dot and a half basically. I put a half-dot for the lan lan.

Basically should I put more lubix, try to wipe it off, or add some jigaloo, or wipe it off and then add jigaloo...

And also, if anyone knows a method to correctly tension the Shengshou 4x4, let me know. Because the Popping is the biggest problem of it all.
 
Thanx for the info.
After I typed the first post, I was just solving my 3x3's, seeing which I like better, color plastic, or stickers. And I noticed my sticker-ed version was slightly slower than the sticker-less.
And I thought back, remembering that I did the white first, and the sticker-less last, after the lan lan and 4x4. And remembered I was a tiny bit more generous with the lube the second time around.
I added a tiny bit more to the white, and now its just as fast. So It may be a lack of lube on the shengshou, considering that there are a considerably higher amount of internal pieces.
 
I used to use Jigaloo for my shengsou 4x4. It improved it, but not very much.
Not long ago, I got some diff oil and lubed my shengsou with it and it made it amazing. (tight tensions)

My opinion:

Diff oil works best. You might not have put enough or put too much.

Edit: Stickerless cubes are always a bit faster than stickered ones.
 
I used to use Jigaloo for my shengsou 4x4. It improved it, but not very much.
Not long ago, I got some diff oil and lubed my shengsou with it and it made it amazing. (tight tensions)

My opinion:

Diff oil works best. You might not have put enough or put too much.

Edit: Stickerless cubes are always a bit faster than stickered ones.
I did notice that the sicker-less was slightly smoother, on the same tensions, probubly because of the colored plastic, makes it softer, or harder... IDK.
But after adding a tiny bit more lube to the white one, it did match speed with it.
Can you please check your shengshou and tell me what the tensions should be. Like how far the center pieces spread when you pull them aside, idk, think of something specific so that I can replicate it.
I tightened the tensions a full turn, and it started to make it less locky, but once I did all of the sides, it was too tight and locked more. >.<
I'm a noob with cubes other than the 3x3.
 
If you seriously want to clean the lube out of your cubes wash the plastic with some warm water and light soap (just like washing your oily hands). The silicone will stick to any surface until it sticks to something else like plastic dust, dirt, and hair.

Since you're using a higher viscosity silicone add a few droplets of water in your cube and then lube it. This will feel like maru lube until the water evaporates. After that you have very smooth surfaces and the silicone filled the microscopic cracks on the plastic.
 
If you seriously want to clean the lube out of your cubes wash the plastic with some warm water and light soap (just like washing your oily hands). The silicone will stick to any surface until it sticks to something else like plastic dust, dirt, and hair.

Since you're using a higher viscosity silicone add a few droplets of water in your cube and then lube it. This will feel like maru lube until the water evaporates. After that you have very smooth surfaces and the silicone filled the microscopic cracks on the plastic.
 
Izovire, you double posted btw.
I have my shengshou set pretty tight compared to the above statement but the edge sanding mod helps with the pops if you're having trouble with that
 
Izovire, you double posted btw.
I have my shengshou set pretty tight compared to the above statement but the edge sanding mod helps with the pops if you're having trouble with that

Haha, This forum for some reason loves to lagg, and tell you that you cant post for 30 seconds, when it actually did post.
Can you show me the mod you are speaking of? Is there a video?
 
I just sprayed mine with silicone, and tightened it about as much as I would a 3x3. I took it apart, evenly tensioned each center to where they pull out about a milimeter, and it was fine. Before that, I was getting explosions. After about 1000 solves, it became GREAT! It was smoothed out and less lockish.
 
Thanx for the info.
After I typed the first post, I was just solving my 3x3's, seeing which I like better, color plastic, or stickers. And I noticed my sticker-ed version was slightly slower than the sticker-less.
And I thought back, remembering that I did the white first, and the sticker-less last, after the lan lan and 4x4. And remembered I was a tiny bit more generous with the lube the second time around.
I added a tiny bit more to the white, and now its just as fast. So It may be a lack of lube on the shengshou, considering that there are a considerably higher amount of internal pieces.

For some reason ( I guess because the white Gu Hongs are full PVC instead of mixed PVC) the white Gu Hongs are HORRIBLE with any kind of high viscosity silicone like lubix or shock oil. The white ones are much softer plastic, and work really well with Maru lube. I had the same problem with mine. The black and colored versions were great with lubix, but the white one was so gummy and slow. I cleaned it all out. My white Gu Hong is the best cube in the world. I have no doubts.
 
Back
Top