4x4

<Shameless hijack>


That's really interesting cause my Dayan feels nowhere near as nice as my X-Cube now. I wonder if I've just got it set up poorly.

I know you are UK based Godmill. Where did you order your x-cube 4x4, I do not see them on Verdes site and wanted to get one now I am becomming more interested in larger cubes. I did buy a cheap set of 2x2, 4x4 and 5x5 back in January but the quality is rather pittiful. I am about to order a v-cube black collection directly from Verdes but obviously it does not contain the 4x4 as it is not mass produced yet. I was debating on a Shenshou or Dayan but think I would rather get the V taking everyone's recommendations into account.

</Shameless hijack> :o
 
When the X-Cube first came out a group of us in the UK ordered a set of them (cause you could only buy them directly from xb27 in packs of 13). I think HKNowStore is the cheapest place to buy them at the moment, but I've never bought anything from there before so I can't vouch for it.
 
xcube is not worth the money !
Dayan is good and i think popping problem can be solved with a good tensioning and the big size won't be another problem if you learn to control it.
Feliks does not have Big hands !!!
 
I outlined the main reasons for this above.

It's personal preference of course, but I think it's good to warn people about various issues with this cube.

Yes I read. i got uber ninja'd there lol

The pops are disastrous, I agree. However, the way I've tensioned mine, they're usually fall outs. A Fu or BU edge falls out sometimes. Before this, it was quite prone to violent explosions and deadly internal pops. But i guess you get used to it. At least with my time. I'm close to 1:40 so it isn't too much of a big deal for me. I do intend to try out the Dayan sometime though!
 
MiniQJ is great. I like it more than an XCube or Dayan.
My friends and I bought 3 MiniQJ and all of them sucked ! even after breaking in for months !
a Tperm took me like 6 7 seconds .
It was so loose and locky.
was your MiniQJ great out of box or you made it great with tensioning and lubing and breaking in ... ?
 
Implying the multiple xcubes I've used haven't been broken in and tweaked? Your opinion is no more valid than mine. (Well, maybe less so ^^)
Cant argue with that. I don't know the quality of 4x4's you are used to. Maybe you just have higher standards then me when it comes to 4x4s (imo all 4x4's suck still, even xcube, though its more like pick my poison, in which I'd choose Xcube anyday, closely followed by Dayan, actually theres no other reason Im choosing Xcube over Dayan other then I go through too much maru lube, and the tiny pops on it is an inconvenience.)
The inner layers suck - this isn't much of a problem for you using the beginner method but it really shows up with other techniques. The pops are muuuch worse than on the Dayan - often you have to disassemble the damn thing some more before you can put it back together.

My inner layers don't suck at all. This is a problem I feel as if the xcubes you have felt haven't been broken in enough. They are never "amazing" but they are good enough for me to do a pure 2flip alg sub 4, though admittedly they are NOT as nice as Dayans. Right now I just use regular reduction with 2pairing.

My XCube never pops. Its fairly loose too. I get about one "pop" (meaning an internal piece comes out, that like little black piece..er..hard to explain, its the tiniest piece, its small...lol) about once every..50 solves? And its more because I get frustrated with me not improving and so I get rough. So its more a choice of smaller/slightly less nice inner layers/no pops over better quality overall turning/pops/bigger. It would be nice to have Dayan, as smaller, with less pops.
 
My inner layers don't suck at all. This is a problem I feel as if the xcubes you have felt haven't been broken in enough.

You're wrong. No amount of breaking in will change how the mech handles.

They are never "amazing" but they are good enough for me to do a pure 2flip alg sub 4, though admittedly they are NOT as nice as Dayans.

I kinda lol'd. That's slow.

My XCube never pops. Its fairly loose too. I get about one "pop" (meaning an internal piece comes out, that like little black piece..er..hard to explain, its the tiniest piece, its small...lol) about once every..50 solves?

So it does pop.

I don't think you're fast enough to notice, but it appears that the xcube pops as much as any other cube. I asked around a few 'fast' people who use one before making this post and the general consensus is that it still pops from time to time.
 
i agree that the xcube explodes from time to time. for me the explosions happen on PLL parity algs, the corner gets caught up on a center piece. i have done a little modding to try to make it better. rounding out the edges and corners seem to help tremendously. the biggest reason the explosion happens, however and unfortunately, is because of the sluggishness on the inner layer. it moves at a different speed from the outer layer. when doing R2' r2, the r slice is typically slightly misaligned before doing the U move. the fix is to grip the Rr tightly and kinda manhandle it. the sanding helped as well.

the only thing that stands out from the dayan to the xcube to me is the slice feels a little sluggish in comparison, however the only time i ever spam slice moves is 1st 3 edges, L4C, and parity cases. however i would like to point out that my slice spamming consists of r's and r2's mostly, and the u and u'. i hardly ever do sequences of rur'. this is where the inner slice shows its true colors. sure, it wont make a good 2x2. the slow inner layers dont really show for me as much as people say they do in a typical 4x4 speedsolve.

i've done extensive solve on my xcube, with slight mods, and i prefer it strongly over the dayan. the dayan is a really great 4x4, but what it all boils down to for me is the size. popping/exploding aside, the slight resistance on the inner layer is something i live with because of the size of the dayan. if they made a 6cm dayan, it would be my cube of choice.

also, the xcube is supporting a member of the cubing community who did something great. imagine if tk had the amount of assets that dayan company has to develop a good cube. im sure the corners and edges of tk's cube wouldnt be so boxy and the slice turning would have been addressed before the final release.
 
Last edited:
If you want a 4x4 for a moderate price, you should get a Lanlan. It's really smooth and it's one of the best 4x4s. You can buy it on Amazon in white or black for only $10.50.
 
If you want a 4x4 for a moderate price, you should get a Lanlan. It's really smooth and it's one of the best 4x4s. You can buy it on Amazon in white or black for only $10.50.

i disagree, lan lan is garbage. if you were asking 'what 4x4's are there?' then lan lan would be an answer.

dayan, xcube. .
 
Some people think that if a cube is new, it means it's the best

typically newer cubes means more issues solved or more innovation. before v-cubish mechs (which are fairly recent), we had ballcores. v-cube mechs, as we found out, have many barriers to jump over to be suitable speedcubes. so, it is not that some people think the newest cube is the best cube. what came out after the guhong? feng V? yeah, that was an awesome cube! whats the newest 3x3? mf8 ballcore! let me rush out and get that one! the best cube is the cube that doesnt physically get in the way.
 
Back
Top