Lubix Review

OK here is my review of lubix. I couldnt make a video since my webcam is acting funny. If used, make sure to apply it to all six sides of the core or it wont work that well. When i tried it on my Haiyan Memory, it worked grea, as long you dont put too much. However, when I put it in my FII, it slowed down significantly. I would say I prefer maru lube to lube my FII. The lubix worked the best on my Ghosthand II because it improved the stability and the corner cutting on the cube.

I have it in my A5, and it works great. I've noticed on this cube that it remains well in the core (as expected). Hard to say on longevity of Lubix on this cube since I've only had it a few weeks. I do still see the gloss of the silicone on the pieces still. But it seems it might need a small dab on the rubbing surfaces in the next week or so to get the surfaces super quick like when I first applied it. That probably has to do with the unique surfaces of the cubies, and that there is a very small area that actually makes contact on this cube. Therefor a smaller area for Lubix to adhere to.

I have a Memory and A6 coming in, and will give my opinions on those as well. I expect them to have similar results due to the design of the rubbing surfaces.

I'll order up an FII here soon, and see how it works for me. It does seem that the smoother the internals of the cubies are, the better it works.

Thanks again for the reviews, and keep an eye out in the next day or so for another review on youtube by Pestvic. =]

- Pixel -
 
Update: I had said that it made my FII cube feel a bit slower after I lubed it.
Well, after letting a few days pass, my FII has only gotten faster and faster. It now feels better than ever!
It seems that the amount of lube that you use is key. Definitely don't overdo it!
 
Using this in a cube already lubed with maru shouldn't cause any chemical reaction which would slow down the cube significantly or glue it, right?
 
Put this on my guhong.... Over 55° corner cutting. Its much more stable now and not nearly as quick. Has a nice bubbley feel while still stopping where I want
 
Last edited:
Yea, I get over a line-to-line cut on my A5... And can do a -negative binding cut almost to the line. It's sick. =]

I'll do a video of both cuts today and put em up.

- Pixel -
 
To add my thoughts to this cube's review:

The DaYan Guhong, in my opinion is the best cube available on the market. And at this point, because of how well it performs, I can not see another cube coming out that has better characteristics than the GuHong.

After lubing and adjusting the tensions to my liking, I have not gotten it to pop. It does not lock up, and gives you a solid "CLICK" as you force it past a binding cut, letting you know you're being sloppy, while still performing the intended move. It's line to line cutting I'm having a hard time getting my head around. Not only will it do past line-to-line, I can legitimately get my cube past 45º, and it can still slice the cut in the intended direction. It will do a binding cut effortlessly with the line to half of the center cap, and will go to about 3/4 to the binding line. It has an a very smooth feel after using Lubix, but is very controllable. I tend to get locking and popping when performing a specific fast algorithm that this cube has no problem performing. I have recently started solving using Roux, and I absolutely love the way M U turns without locking up or over shooting.

It is quite simply an amazing cube.

After seeing how Lubix increased the performance on these cubes at the 2010 Nationals at M.I.T., and with Zarxrax's review, I went ahead and ordered one, along with just about every popular speed cube that was not in my collection.

My list of cubes, from favorite on down.

DaYan Guhong
Ghost Hand II
HaiYan Memory
Type F-II
Alpha V
Alpha VI
Type C
Type F-I
Maru
Edison
C4U Gas Assisted
California Rubik's
Store Bought Rubik's

To be determined: (Ordered, and coming in today or tomorrow)
DaYan II DIY
Type Q
Ghost Hand I

I went a unique route in lubing the Guhong, to see how well I could get it to perform. Mind you, that similar to the review by Zarxrax, my Guhong felt slightly better that a store bought before I lubed it. Absolutely horrible.

I disassembled the Guhong, unscrewed the centers from the core, and went to town, lubing every contact point that could be made inside the core. I applied Lubix to the inner base of the center piece, where the washer sits. Lubed on top of the washer where the spring sits. The top lip of the screw where the other side of the screw rubs. The inner wall lip where the screw bottoms out at when you pull out on the core.

Mind you that the total amount of Lubix I used to lube all these areas was about a quarter the size of a BB. It took very little, just a light glazing. I then lubed the core as normal, and put a single small dab about half the size of a BB for the rubbing surfaces.

The Guhong became absolutely the best thing I have ever felt in a cube. So much so, that I have ordered another 3 from http://speedcubeshop.com (only $13 bucks each) so that I can give one to my friend Ben, Patrick, and have a 2nd one for myself.

I have always gotten awesome results using Lubix on any cube it touched. It seems to bring out the best characteristics of any cube's particular design. It doesn't really change the way a cube performs, just makes how that specific cube feels more prominent.

So after coming across the Guhong, I am sharing my opinion, that this is the best designed cube out there, and think it accommodates a great feel no matter what style or method you use to solve.

Get one, get Lubix, and see for yourself!

Also know, that SpeedCubeShop and I have partnered up, and I am going to be pre-lubing every 3x3x3 that the shop sells prior to purchase, and at no expense to the customer.

So if you want to see what I'm talking about with the Guhong, and want to see what the hype of Lubix is all about, give us about a week or so and go buy the Guhong from SpeedCubeShop, or any other 3x3x3 from them for that matter, and it will be shipped pre-lubed with Lubix and ready to go.

Thanks for reading,

- Pixel -
 
I'm totally going to go try that on my guhong. I'll post results here tomorrow.

By the way, in your opinion, does lubix take any break in time? I find the longer a cube with lubix in it is used the better it gets.... Well so far.
 
I'm totally going to go try that on my guhong. I'll post results here tomorrow.

By the way, in your opinion, does lubix take any break in time? I find the longer a cube with lubix in it is used the better it gets.... Well so far.

It makes them absolutely incredible. (totally overkill, but man, you can't get a cube better than this.)

=]

The break in time for the core for me is actually before I reassemble the cube. Once I have it on one of the core spots, I give the core a few spins until I feel all the resistance go away on that side, letting me know that it has worked it's way up the screw and onto the spring / washer. It's easier than reassembling, and giving each side a bunch of turns.

As far as the surface piece you put the dab on... i'd say within a few solves, it'll distribute itself evenly.

If the cube surfaces are smooth, after say 1 solve, pull out an edge, and you will see that little dab of Lubix has worked itself all the way around the pieces, but it looks like it was raked on, and isn't totally smooth. After about 10 solves maybe? the silicone looks like it was spread evenly on the pieces.

And I agree with what you noticed, that the cubes seem to get better and better.

I'm going to add additional info to my site and give suggestions for when pieces are not smooth, such as the Ghost Hand, and the GuHong. (since it has that gap on each corner)

To minimize resistance, a lot of cube manufacturers are making funky pieces to get their cubes to slide smoother.

On the Ghost Hand, I simply used my finger on the pieces to get the silicone to coat evenly. I think each cube will have it's own case, but as a general guideline, get it to distribute evenly, and thinly. It's very thick, and even that thin layer on there can last months if you're not taking the cube apart or basically touching the internal parts of the pieces.

Hope that helps ya.

- Pixel -
 
I liked how my F-II felt after you lubed it for me at Nats, so I'm looking forward to ordering a Guhong in a few weeks and seeing if it lives up to the hype.

Thanks for the free syringe of Lubix and shirt btw, Pixel. :)
 
How will you lube every 3x3 speecubeshop sells?
Also, can I use Lubix with any twisty puzzle that has a spider core?

It's going to be a lot of work, but basically thru the power of shipping.

=]

I will be personally lubing every 3x3x3 that SpeedCubeShop sells, to ensure that it is done correctly, and so that the customers can have a chance to experience the benefits of having a cube lubed with Lubix.

Again, we are picking up the expense of doing this on our side, so that you get the best cubes possible.

It's a challenge to launch any product into a market, and I am committed to showing everyone interested in how their cube performs what Lubix is about. Even if it costs me to do so.

In the mean time, keep an eye on Cameron's site for updates on when they will be available. Should be within the next week or so.

To answer your 2nd part, yes, I have seen great results from using lubix on a large variety of puzzles, including up to the 7x7, and some crazy customs. Just remember to use minimally, and add as needed.

The 3x3's are a good place to start, because of the minimal time needed to lube one correctly. When you get into 2x2's or 4x4's and up, the disassembly and reassembly time make it too large of an undertaking for 1 person. The 2x2's do turn out awesome though, but I'm not very quick at taking them apart and then readjusting them.


- Pixel -
 
Last edited:
Back
Top