Exploding Megaminx

RubiksAddict

Member
Joined
Apr 16, 2009
Messages
1
Hey all,
Many apologies if a similar thread has already been started; I did try a search and came up with no results so I'm going to bite the bullet and create a new thread!

I recently bought a Megaminx and I'm having problems with it exploding on me. It seems that at least once out of every two solve/scramble attempts the thing will fall apart, springs will pop out, and pieces will fly. It's such a pain, as I'd like to be able to solve it without the fear of it falling apart all the time. I'd also like to be able to solve it in public places, like on the bus, without the fear of losing pieces.

Are there any modifications that can be done to the Megaminx, or have I just bought a really bad quality one (good ol' student budget)?

I'd appreciate any help, advice, or direction you guys can give!

Thanks in advance,
 
Last edited:
haha :P

Does it happen to one side or all of them (or maybe just 2 or 3)?

try to put some superglue on the threads of the screw and then screw it back in. It worked for me on my Chinaminx
 
Last edited by a moderator:
can you pop the caps off and tighten the screws a bit? not sure if you can do that on a chinaminx. mine was stiff so i loosened it a bit and now it pops occasionally but i can deal with that. So i imagine tightening it would reduce popping?
 
can you pop the caps off and tighten the screws a bit? not sure if you can do that on a chinaminx. mine was stiff so i loosened it a bit and now it pops occasionally but i can deal with that. So i imagine tightening it would reduce popping?
Yes it's possible. Getting big pops because the screws are too loose seems to be a quite common problem with new chinaminxes (it was the case with mine too), and tightening the screws solves it.
 
I have one of those PVC megaminxes ($9 off of C4U) and it sometimes has pops, but they're not as big as anything you're describing, I had one close, and that was just 5 pieces.

Maybe you could put something like "locktite" or w/e it's called onto your screws to get them in...

@Simon, HOLY CRAP that was pretty cool =P
 
The same problem kept happening with me. I solved this by removing the spring entirely. The center will appear loose at first, but will remain sturdy after all the pieces are placed in.
 
Back
Top