Vasseline Theory. Please leave feedback.

vaseline is only bad if you physically turn after you put in the Vaseline, because that oil acts like a blocker to the cube and every time you turn you push your plastic through it, and it seems to shave off plastic
 
I know from personal experience. I used vaseline in a cube once and within a week a center piece had been eaten through to the point that it pulled off of the core (and the screw!)
 
I put it in a store bought and left it in a year. I wiped it out and put in jigaloo. The cube is not ruined by any means.

Plenty of people put vaseline in storeboughts to break them in.


As for not melting the cube, I think the movement of the cube is what works the vaseline into the plastic and cases the damage. I had a storebought with vasline in and used it for a long time, and I must say that compared to other lubricants the amount of black dust that came out was unreal. One day the cube simply broke.

EDIT: After checking multiple sites on Google, I have determined that petroleum jelly melts latex.

Taken from Wikipedia:
"Petroleum jelly is commonly used as a personal lubricant. (Not recommended for use with condoms because it dissolves latex)."



People use it with condoms all the time, but wiki isn't always the best source

And they're idiots.

Exactly. Some people do heroin, and it doesn't always kill them. Does that mean sites are wrong that have said it's deadly?

I say this all the time about various things. Just because it has worked before does not mean it's a good idea.
 
I put it in my store bought for 7 months. After a year, the cube is perfectly fine ;)
 
My first cube which had had vasseline in (for about a year) broke and due to the eating away at cubes theory I guessed that it had been weakened by vasseline. However it was really old, had been overused, and what broke it was falling 4ft onto a hard surface.
 
ABS plastic has "excellent" chemical resistance to petroleum jelly.
The Acetone in CRC Silicone Spray would give you more problems.
 
I put it in a store bought and left it in a year. I wiped it out and put in jigaloo. The cube is not ruined by any means.

Plenty of people put vaseline in storeboughts to break them in.


As for not melting the cube, I think the movement of the cube is what works the vaseline into the plastic and cases the damage. I had a storebought with vasline in and used it for a long time, and I must say that compared to other lubricants the amount of black dust that came out was unreal. One day the cube simply broke.

EDIT: After checking multiple sites on Google, I have determined that petroleum jelly melts latex.

Taken from Wikipedia:
"Petroleum jelly is commonly used as a personal lubricant. (Not recommended for use with condoms because it dissolves latex)."



People use it with condoms all the time, but wiki isn't always the best source

And they're idiots.


Again, my main point was that wiki isnt always the best source.
 
My first cube which had had vasseline in (for about a year) broke and due to the eating away at cubes theory I guessed that it had been weakened by vasseline. However it was really old, had been overused, and what broke it was falling 4ft onto a hard surface.

I dropped mine in the lunch room, not even 3 feet and the core snapped off.
 
My first cube which had had vasseline in (for about a year) broke and due to the eating away at cubes theory I guessed that it had been weakened by vasseline. However it was really old, had been overused, and what broke it was falling 4ft onto a hard surface.

I dropped mine in the lunch room, not even 3 feet and the core snapped off.

Yeah in my experience it doesn't actually melt the thing to a puddle but it weakens it and eventually the core just breaks.
 
had a storebought cube, sprayed a lot of 3-in-1 silicone which is actually by wd40 without knowing :eek: it felt horrible, doesn't speed up your cube until after 2-weeks, and even then it sucks. Disassembled my 3X3 a few months later for making a video cuz i was bored, the plastic had cracks:eek::eek::eek:
I tried to fix the damage using a heck lot of jig-a-loo, didn't really work, but still ok, the cracks are still there:fp
 
I think several samples of ABS plastic that have been treated with Vaseline and WD40 over various durations should be stress tested. It's the only way to know for sure. Unfortunately I no longer have access to a lab so some other mech e. should do it! :)
 
a few weeks back , i got out my storebought i use to play with a year ago and cleaned it out. apparently it had Vaseline in it for more than 9month but i found no problem with it whatsoever. i cleaned it and relubed with crc and now its very speedy(still cant cut corners:fp)

my guess is that different types of plastic react to Vaseline differently.(just like how some people experience fI deteriorating with crc) but yeah,this is only a guess

EDIT:it should be obvious but you should only put vaseline in small amouts onto the core instead of applying it onto edges
 
I put it in a store bought and left it in a year. I wiped it out and put in jigaloo. The cube is not ruined by any means.

Plenty of people put vaseline in storeboughts to break them in.


As for not melting the cube, I think the movement of the cube is what works the vaseline into the plastic and cases the damage. I had a storebought with vasline in and used it for a long time, and I must say that compared to other lubricants the amount of black dust that came out was unreal. One day the cube simply broke.

EDIT: After checking multiple sites on Google, I have determined that petroleum jelly melts latex.

Taken from Wikipedia:
"Petroleum jelly is commonly used as a personal lubricant. (Not recommended for use with condoms because it dissolves latex)."



People use it with condoms all the time, but wiki isn't always the best source

And they're idiots.


Again, my main point was that wiki isnt always the best source.

Don't try to discredit my sources when you don't have any.
 
I have 4 storebought cubes, 2 given to me, 2 purchased, all received new. I will give you a brief description of the four.

1. vaseline+sand: was beast for OH for several months. the cube was fast and loose to the point it cut corners quite well. However, a few years it has become so loose and slow (core/spring degradation possibly?). This is even with cleaning and no other lube.

2. vaseline: cuts corners fairly well, doesn't lock up that much, but it has no potential to be fast. Has a weird smooth, dirty feeling despite being cleaned.

3. forcibly broke in: Hard to turn, locks, no cutting. Sucks!

4. forcibly broke in+CRC: Easy to to turn, easier to recover from locks, cuts decently.

Petroleum distillates seem to "melt" the plastic, basically diminishing the quality of the plastic. That would explain the nasty smooth feeling. Vaseline leaves a residue and doesn't wash off easily so I would think that it'd continue to produce that "eating away" effect.

Regardless, this is just my experience with vaseline. I can't sub-15 with #1, and 2 because they are so loose and slow, but I have gotten 14s with #4, and sub-20 with #3.

Some people on this forum have noted using vaseline to break in their cubes, cleaning and switching to silicone, with positive results. But, these people tend to barely sub-40, skewing the results.

BTW, you misspelled "Vasseline". It should read, "Vaseline".
 
Again, my main point was that wiki isnt always the best source.

Show a better one disagreeing with it about this or shut up.

Well anyone can edit a wikipedia. And there haven't been any "Studies" or ideas on this. Just this one. Thats why I posted it, to get opinions, and see your guys' personal expirences. Thanks for the feedback
 
Back
Top