Type C-II review

Wickex

Regular
Joined
Aug 3, 2010
Messages
45
Location
The Netherlands
WCA ID
2010PIEP01
Hey guys,

I got my C-II in the mail yesterday and decided to do a review on it :)

Pictures:
Stickers (bad sticker quality, this is the side with the most intact stickers)
Core (sorry for bad quality, my camera can't focus at short distances)
Edgepiece (Notice the edges, not the factory rounded edges, but the outer edge on the right side, it "sanded" itself down. Also notice the colored spickles on my table, they broke off of my stickers)
Cornerpiece and another one.
The boxes it came in



Smoothness: 7/10 It's pretty rough, especially out of the box.

Speed: 9.5/10 It's a really, really fast cube, even on tight tension.

Corner cutting: 7.5/10 Out of the box it can't cut corners like at all, but after changing the tension to my liking it improved a lot, but it's still not that great. It can do around max 30 degrees cuts and only to one direction, so no backwards corner cutting.

Stability: 8.5/10 It pops every now and then, but I think it was because the tension on 2 of the sides were too loose. It hasn't popped since then, so if it stays that way I'll change this in a 9.5/10.

Lock-up resistance: 8/10 Out of the box it has a lot of lockups, but after setting the correct tension and solving it a lot of times it improves.

Quality: 8/10 The quality of the cube is great, but the reason I don't give it a 10 is because of the stickers. I've only got the cube for 2 days now and the stickers are peeling and "breaking" already, and I don't use my cube roughly or anything. Look at the pictures if you want to see what I mean. The center caps don't come off unless you want them to or drop the cube. If you drop the cube the cube won't explode, but the center caps will fall off.

Quietness: 6/10 It's quite noisy.

Feel: The cube feels really fast but rough.

Overall:

Pros: Fast, not a lot of pops

Cons: Not great corner cutting, bad sticker quality, noisy

Overall it's a great cube. The cons aren't that important except for the corner cutting, but it's not that big of a problem.
 
Thanks for the review.

Some comments:
* The 'rough' feeling should go away after a thorough break in (mine now feels pretty smooth).
* I found the sticker quality to be fine. The colours are bright and distinctive and don't fade. The stickers on my main CII have a few chips as expected, but they're still largely intact.
* Deffo agree about the lockiness though, it's not terrible, but certainly noticeable.



Since this was my main speedcube for a while, I thought I'd add my thoughts on it as well:

I currently have 2 CII's - one (heavily modded) was my main speedcube for around 3-months, the other is my 'kitchen' cube (yes I have a cube for every room in the house :o). Overall the cube is pretty good. Greatest plus for me was the cube plastic, it's a nice high quality hard plastic, responds great to lube and glides very smoothly once broken in.

Main negatives I found with the cube were (1) lock-ups and (2) quality of the core/frame. The core itself appears to the same as on the original type-C, and these sometimes allow layers to unscrew themselves. The spring housing within the centre pieces is also poorly designed which causes a springy sound and wears out the plastic on the inside of the centre pieces. The springs also seem too springy - ie. the layers are sprung too tightly together at a standard tension, which makes it a little stiff to turn.

My modded CII was an attempt to get round these problems. I replaced the entire frame (core, screws, springs and centres) with one from an FII, sanded/rounded the inner edge tabs, and also cut them to a diagonal shape (like the FII). It definitely reduced lock-ups, and the lighter pull on the FII springs allows it to glide nicely at a standard setting (tight enough that pops don't happen).



... there are also a few youtube reviews:


... and finally, don't forget the wiki article ;)
 
Last edited by a moderator:
Back
Top