Trying Your Main 3x3s (Cube + Lube Combo) - 65/100

[randomness...]

Just finished putting all the data into an Excel spreadsheet.
So far I have 65/100 mains (from here and YouTube).
A few notes:
1) I can't make any setups using lubes not found on TheCubicle
2) I wanna aim to get 100 mains because We Tried 100 Cubers' Mains sounds pretty good as a title. It's not completely necessary but a bonus. Feel free to add your setups if you haven't already.
3) I have a $1000 package coming up containing every MoYu 3x3 (all versions of RS3M 2022, RS3M Super V2, RS3M V5, YS3M, WRM V9, Weilong Super) along with every GuHong Pro along with GAN 13 + 14. Until then I can't try some of the setups mentioned but I will get to those when the package arrives (I'll be ordering soon).

I'll be spending a few hours each week setting up cubes and hopefully I come across a new main to steal use.
Thanks for the responses so far

mines pretty much a thicker with a thin lubricant

 

[Cuber2s]

@Zain_A24

Can we submit a second setup for a different cube? I submitted my WRM V9 setup but I feel my YS3M setup is pretty interesting.

 

[Zain_A24]

@Zain_A24

Can we submit a second setup for a different cube? I submitted my WRM V9 setup but I feel my YS3M setup is pretty interesting.

I wouldnt mind that but would be cool to get different people's mains. Feel free to drop a couple of mains (maybe a main and backup main)

 

[Cuber2s]

Alright, here's my YS3M setup
Cube:YS3m Ball-Core(not UV)
Tension: A little tighter than stock
Compression: 5th setting
Core Lube: Weight 5/50k(I replaced the maglev with RS3M springs)
Piece Lube: Mystic and Dignitas

 

[Bingus Ringus McDingus]

I wouldnt mind that but would be cool to get different people's mains. Feel free to drop a couple of mains (maybe a main and backup main)

Don't know if this counts, but here's my OH main:

Cube: DaYan GuHong V3 M Stickerless. (For the full experience, peel off the logo and put it on the yellow center instead)
Tensions: Stock springs, moderately loose tensions
Elasticity: N/A
Magnets: N/A
Core: I forgorprobably some Weight 1 if I had to guess
Pieces: Angstrom Dignitas, Lubicle Speedy

 

[Kami]

Don't know if this counts, but here's my OH main:

Cube: DaYan GuHong V3 M Stickerless. (For the full experience, peel off the logo and put it on the yellow center instead)
Tensions: Stock springs, moderately loose tensions
Elasticity: N/A
Magnets: N/A
Core: I forgorprobably some Weight 1 if I had to guess
Pieces: Angstrom Dignitas, Lubicle Speedy

i used to use the v3 for 2h and my setup was
Core: weight 5
pieces: martian and gan 1 (replace martian with smth like silk)

 

[G DA CUBER]

Xman Tornado V2
4/5
no core lube
GAN lube

 

[@UAPermOfficial_YT]

MoYu rs3m ball core maglev
tighness: 7/9

 

[Bingus Ringus McDingus]

@Zain_A24 when do you think this video would be released?

 

[Zain_A24]

@Zain_A24 when do you think this video would be released?

My plan is to go like this:
1) $1000 Cube Unboxing
2) We Tried Every MoYu 3x3 | Ultimate Comparison
3) We Tried 100 Cubers Main 3x3
4) We Tried Every Cube Lube

So probably in a few weeks.
That way I can get the guides out in time for people to buy for Christmas and then the main videos to give people ideas on the combos + setups. Lot of work to do though, probably gonna have to sell my soul for the next few months.

 

[Kami]

Dayan Guhong Pro M 55mm standard
compression:4
Magnets:N/A
Core Lube:N/a
Piece lube: Mystic in the tracks, compound x, silk in the pieces
I think you can tell that i value controllability

Recently changed compression to 4

 

[Kami]

Dayan Guhong Pro M 55mm standard
compression:2
Magnets:N/A
Core Lube:N/a
Piece lube: Mystic in the tracks, compound x, silk in the pieces
I think you can tell that i value controllability

Switched mains
X-man tornado v3 flagship
Center settings: Both at 3
Magnets: default
Core lube: N/A
Piece lube: Gan 1, weight 5, silk
You could just include both in the video

 

[LBr]

Here’s mine if ur interested:
Cube - RS3V5 BC
Tension - loosened by 1/4 turn to improve corner cutting.
Elasticity - I think mine is 2 clicks
Lube - dignitas on tracks silk on pieces

 

[Fallen]

Cube: WRMv9 without edge-core magnets, but with maglev. Roughly stock screw depth, 5 clicks for tensions.
Core Lube: Heavy silicone (50k cst) + dignitas + like 3 drops light silicone
Piece Lube: Light silicone (50cst) + dignitas

takes a while to break in, but feels godly

 

[Kami]

sorry i keep changing my cubes but,
Tornado v3
Center settings:Both at 2
Core lubes:n/a
Piece lubes: yo lube setup minus weight 5
Backup main: guhong pro 55mm standard
Center settings: 5
Core lubes:N/A
Piece lubes: yo lube setup minus weight 5

 

[An Animating Cuber]

I got a new cube a while ago
Cube: Tornado V3 Flagship
Tension: 3
Spring/MagLev Compression: 3
Magnet Settings: 5 (Maximum)
Core Lube: N/A
Piece Lube(s): Angstrom Gravitas & Dignitas on tracks, DNM 37 on pieces

 

[Cubinginatree]

Here is my main!
Cube: YS3M BC
Spring Compression: 4
Piece Lube: DNM and Silk on Tracks and pieces.

 

[Garf]

My Main:
Cube: Gan 11 M Pro Frosted version
Blue Piece at 2, compression down 2-3 ticks. Don't remember lol.
Lube: Angstrom Gravitas, Angstrom Dignitas, DNM-37. Sometimes I add Mystic.

 

[TheSpeedSkewber]

My Main:
Cube: Gan 11 M Pro Frosted version
Blue Piece at 2, compression down 2-3 ticks. Don't remember lol.
Lube: Angstrom Gravitas, Angstrom Dignitas, DNM-37. Sometimes I add Mystic.

Just out of interest, what is your megaminx setup?

 

[Garf]

Just out of interest, what is your megaminx setup?

I use angstrom lubes, Gravitas Dignitas DNM-37. I also have tensions that make it so that corner cutting is good but it's stable.