Trying Your Main 3x3s (Cube + Lube Combo) - 65/100

[VincentCuber]

Cube: Gan 356m
Settings: Stock
Core lube: none
Piece lube: DNM 37

 

[Bingus Ringus McDingus]

Cube: MoYu Super RS3M 2022 (Standard)
Tension: *
Spring/MagLev Compression: the loosest
Magnet Settings: N/A
Core Lube: None
Piece Lube(s): u take a damp tissue and dab the pieces with it the let it dry (it’s a weird one but it works)


*it is a little above the compression ring ie. View attachment 27673

Please, for the love of god, buy some actual lubricant. You're actually making things worse with water.

 

[JDAW6]

Please, for the love of god, buy some actual lubricant. You're actually making things worse with water.

I will I am just cleaning it with a damp cloth when it gets dirty,

 

[erictom333]

Cube: Yuxin Little Magic
Tension: Loose but not too loose
Spring/maglev conpression: N/A
Magnet settings: N/A
Lube: N/A

 

[Garf]

Cube: Super RS3M 2022 Ballcore
Tension: moderate on the screw
Compression: on 2
Core lube: lubicle air
Piece lube: I’ve been playing around with angstrom set up and mystic set up. Probably go with angstrom set up (gravitas Dignitas DNM37)

 

[Jorian Meeuse]

Cube: Gan 356 XS
Tension: idk
Compression: idk
Core lube: none i guess
Piece lube: gan standard

Lazy, but hey, it's enough to average 8s so who cares?

 

[randomness...]

Cube: Gan 356 XS
Tension: idk
Compression: idk
Core lube: none i guess
Piece lube: gan standard

Lazy, but hey, it's enough to average 8s so who cares?

if youve never switched the hex nuts (i think they are in that one)
its a yellow hex on setting 0.8

 

[Jorian Meeuse]

if youve never switched the hex nuts (i think they are in that one)
its a yellow hex on setting 0.8

I've messed around with it at some point but I've no idea what they are. I wouldn't be surprised if they were all different from each other

 

[randomness...]

I've messed around with it at some point but I've no idea what they are. I wouldn't be surprised if they were all different

i feel that, i had a whole different hex nut when i mained the 356 xs too
it was all yellow except for my yellow side, which was a purple hex

 

[TheSpeedSkewber]

Cube: Super RS3M V2 Ball Core (Works on any fast/not blocky cube)
Tension: Stock
Compression: 2 Clicks
Core lube: Adheron Heavy (or lubicle black)
Piece lube: Martian first coating (or mystic), KewbzUK Aqua (or dnm) second coating
Tracks: Small amount of Angstrom Dignitas

 

[Zain_A24]

Just finished putting all the data into an Excel spreadsheet.
So far I have 65/100 mains (from here and YouTube).
A few notes:
1) I can't make any setups using lubes not found on TheCubicle
2) I wanna aim to get 100 mains because We Tried 100 Cubers' Mains sounds pretty good as a title. It's not completely necessary but a bonus. Feel free to add your setups if you haven't already.
3) I have a $1000 package coming up containing every MoYu 3x3 (all versions of RS3M 2022, RS3M Super V2, RS3M V5, YS3M, WRM V9, Weilong Super) along with every GuHong Pro along with GAN 13 + 14. Until then I can't try some of the setups mentioned but I will get to those when the package arrives (I'll be ordering soon).

I'll be spending a few hours each week setting up cubes and hopefully I come across a new main to steal use.
Thanks for the responses so far

 

[Kami]

Dayan Guhong Pro M 55mm standard
compression:2
Magnets:N/A
Core Lube:N/a
Piece lube: Mystic in the tracks, compound x, silk in the pieces
I think you can tell that i value controllability

 

[Arcanist]

Cube: Gan 356 M
Tension: Tightest GES nuts on the tightest settings
Spring/MagLev Compression: N/A
Magnet Settings: N/A
Core Lube: N/A
Piece Lube(s): 3 drops of Lunar and 3 Drops Martian
So I'm not really sure how to describe my main. I got the Gan 356 M out of the box, changed the GES nuts to the tightest ones, then added some Lunar and Martian and that's it. I may add weight 5 since I just got it yesterday.

If you would like you can change the piece lube to something like 2 drops DNM37 (for the lunar) and I added weight 5.

 

[Bingus Ringus McDingus]

Yoo,
So recently I bought every cube lube and I plan on replicating as many people's main 3x3's as possible (I will likely move on to other events soon).
Feel free to write your mains along with instructions on how to set it up down below.
For example mine is as followed:

Cube: MoYu Weilong WRM 2019
Tension: Stock tensions
Spring/MagLev Compression: 0 Clicks (because I'm lazy)
Magnet Settings: N/A
Core Lube: Weight 5
Piece Lube(s): Gravitas on edge track, Dignitas on piece surface, 1-2 drops DNM-37

The more specific/detailed the responses are the more accurately I can replicate your main, e.g. what version of cube you're using (ball core/maglev etc) and amounts of lube used.
I will be making a video in which I roast your mains and setups as well as finding the best one.
(also I searched for a similar thread but couldn't find one but if there is one then admin feel free to merge this with another one)

I look forward to trying your mains.

@Zain_A24 I was wondering:
Question 1. Are you going to tell the audience what the username of each person is on the forums or on Youtube, because I think that "this next main comes from Bingus Ringus McDingus" would be funny.

2. Did you see my challenge about using a rusted out cube for a week if you liked my WRM setup better than yours? I'll post a follow-up video if needed.

 

[Zain_A24]

@Zain_A24 I was wondering:
Question 1. Are you going to tell the audience what the username of each person is on the forums or on Youtube, because I think that "this next main comes from Bingus Ringus McDingus" would be funny.

2. Did you see my challenge about using a rusted out cube for a week if you liked my WRM setup better than yours? I'll post a follow-up video if needed.

1) Yea I plan on crediting the setups to the individual that shared it so Bingus Ringus McDingus will make an appearance in a future video
2) I did, I haven't tried any setups yet because I was working on some other projects but I will try some (including yours) this weekend because my WRM is getting a bit too fast now anyway.

 

[Kami]

1) Yea I plan on crediting the setups to the individual that shared it so Bingus Ringus McDingus will make an appearance in a future video
2) I did, I haven't tried any setups yet because I was working on some other projects but I will try some (including yours) this weekend because my WRM is getting a bit too fast now anyway.

well, when you do mine just telling you that my user is pronounced “jocklin”

 

[Zain_A24]

well, when you do mine just telling you that my user is pronounced “jocklin”

Yea I thought about this when I entered it into the spreadsheet. Glad I wasn't wrong with the pronunciation.

 

[Kami]

Yea I thought about this when I entered it into the spreadsheet. Glad I wasn't wrong with the pronunciation

well, i got it from keyboard spam, so pronunciation isnt clear

 

[TheSpeedSkewber]

1) I can't make any setups using lubes not found on TheCubicle

It probably doesn't matter but i updated my original post (below) to use cubicle lubes instead.

Cube: Super RS3M V2 Ball Core (Works on any fast/not blocky cube)
Tension: Stock
Compression: 2 Clicks
Core lube: Adheron Heavy (or lubicle black)
Piece lube: Martian first coating (or mystic), KewbzUK Aqua (or dnm) second coating
Tracks: Small amount of Angstrom Dignitas

 

[Bingus Ringus McDingus]

Just finished putting all the data into an Excel spreadsheet.
So far I have 65/100 mains (from here and YouTube).
A few notes:
1) I can't make any setups using lubes not found on TheCubicle
2) I wanna aim to get 100 mains because We Tried 100 Cubers' Mains sounds pretty good as a title. It's not completely necessary but a bonus. Feel free to add your setups if you haven't already.
3) I have a $1000 package coming up containing every MoYu 3x3 (all versions of RS3M 2022, RS3M Super V2, RS3M V5, YS3M, WRM V9, Weilong Super) along with every GuHong Pro along with GAN 13 + 14. Until then I can't try some of the setups mentioned but I will get to those when the package arrives (I'll be ordering soon).

I'll be spending a few hours each week setting up cubes and hopefully I come across a new main to steal use.
Thanks for the responses so far

I have an idea:

"We Tried 3x3x3x3 People's 3x3x3 Mains" so you only need 81 mains to try instead of 100 (stupid idea but it could work)