GenTheSnail
Veteran
Because it's confusing and kinda annoying, please either stop changing the title, or when you do, write the date that you changed it so that I know if there are actually more updates to the cube.
Tempest 3V1 Development Thread (2016 Model leaked)
- Thread starter Sion
- Start date
Some takeaways:
It is very fast, and probably the most fluid cube I own right now (Far more fluid than my yuexiao pro.) Corner cutting isn't exactly where I want it (45+ forward and 1/2 or 2/3 reverse) but it's probably because it is 3d printed. It is also abnormally fast, which is probably due to the texture. I'm sure a mass produced model will be more controllable and smoother than what is depicted here. The good thing is that whatever it can cut, it isn't extremely harsh feeling, and goes quite well with the rest of the turns. It is also PLA, and plastic does have an impact on performance.
It is very fast, and probably the most fluid cube I own right now (Far more fluid than my yuexiao pro.) Corner cutting isn't exactly where I want it (45+ forward and 1/2 or 2/3 reverse) but it's probably because it is 3d printed. It is also abnormally fast, which is probably due to the texture. I'm sure a mass produced model will be more controllable and smoother than what is depicted here. The good thing is that whatever it can cut, it isn't extremely harsh feeling, and goes quite well with the rest of the turns. It is also PLA, and plastic does have an impact on performance.
One day after review: this cube is like a zhanchi without any locking or popping issues. The similarities is that it shares the same corner cutting as the zhanchi, but much more effortless on the 3v1, so I don't anticipate it to be full. My cube is also just a little more flexible, and flows better than most flagships I've tried. If anyone is still interested, let me know. I wanted to be honest about performance.
One Wheel
Legend
Corner cutting is overrated. My old Zhanchi pops and has a really blocky feel, but on corner cutting alone it's fine. What you've described is, in my opinion, perfectly adequate corner cutting. What about center caps? It seems like they usually make a big difference in the feel of the cube, and I see in the video that you don't have them on. I was starting to get a little skeptical, and I was a little worried that the octagonal centers would result in some catching, but after watching the video and reading your description I'm actually really excited about this puzzle.
The cube is fine with caps, but I will need to mod the center bases a little down for them to fit properly. They stick out a little on the prototype, which would innately cause catching on any cube.
WombatWarrior17
Veteran
How big is it? 57mm? 56mm?
One Wheel
Legend
Sure.
You mentioned the prototype is made of PLA. If you end up mass producing it, will that be the same?
What size are you planning on?
Have you talked to manufacturers yet? Do you have any better idea when it might be released and who will be manufacturing it?
I think you've mentioned that you weren't planning on making a magnetic version, but will there be room in the pieces for magnets to be added later?
the 2016 variant (black stickered one) was 55.5
The 2018 variant, the blue one I just uploaded, is 56.
I'm thinking ABS plastic, more durable. If capped, I may have a plastic "illusion" of
Cheaper Plastic Caps and higher quality internals.
56mm in size.
I plan on working with Fangshi, QiYi, or MoYu. However, the fluidity and speed of the 3v1 reminded me of a Fangshi Puzzle. I'll probably ask the cubicle to contact them most likely. I haven't talked with QiYi in a while, and MoYu already has too many subsidiaries, though they may want to work with me. Maybe between mid 18 and early 19.
and I will make a magnetic version, since that is a popular trend now. I don't want a personal preference to interfere with a mass produced product.
Duncan Bannon
Veteran
What springs do you plan on using?
I currently have M3 springs in the prototype. I plan on stronger springs though to make it more controllable.
Duncan Bannon
Veteran
Although I'm no pro, I would try to contact Moyu, Qiyi, etc and see that if you can get X money on kickstarter they will make it.
I got a Contest for you!!!
Whoever gets a Large speedcube manufacturer to send me an Email ([email protected]), Will get a prize.
What is this so called prize?
There is a chance I will be getting a second 3d printed prototype... The winner of this giveaway will get one. Cool, huh?
Viable companies:
MoYu
Yuxin
GAN
QiYi
Shengshou
Fangshi
Rules: Send me what you would send out, and screenshots of conversations you had with them if you want to apply.
Whoever gets a Large speedcube manufacturer to send me an Email ([email protected]), Will get a prize.
What is this so called prize?
There is a chance I will be getting a second 3d printed prototype... The winner of this giveaway will get one. Cool, huh?
Viable companies:
MoYu
Yuxin
GAN
QiYi
Shengshou
Fangshi
Rules: Send me what you would send out, and screenshots of conversations you had with them if you want to apply.
Last edited:
Duncan Bannon
Veteran
What would you want us to say?
Basically there is a project I saw and that this person needed a larger company to talk and make negotiations with regarding this puzzle.
A new update on performance:
I just did a spring swap with my Yuexiao Pro. Right now, I see this cube having serious potential on the market. It is stable, slightly blocky when turning slow and very, very fluid when turning fast. Interestingly, the cube is just slightly blockier when doing Slice moves, which inclines me to think that this cube would be heaven on earth for roux solvers. Corner cutting both ways has improved, though it isn't full.
Honestly, this cube performs almost exactly how I wanted it performance wise. No resistance turning that carried a layer along as much as you push it.
Also, Please vote in the poll. I want to have a good idea on who I should work with.
I just did a spring swap with my Yuexiao Pro. Right now, I see this cube having serious potential on the market. It is stable, slightly blocky when turning slow and very, very fluid when turning fast. Interestingly, the cube is just slightly blockier when doing Slice moves, which inclines me to think that this cube would be heaven on earth for roux solvers. Corner cutting both ways has improved, though it isn't full.
Honestly, this cube performs almost exactly how I wanted it performance wise. No resistance turning that carried a layer along as much as you push it.
Also, Please vote in the poll. I want to have a good idea on who I should work with.
cubeshepherd
Veteran
- Joined
- Feb 18, 2018
- Messages
- 2,261
I voted for Qiyi due to the fact that they are my favorite cube company at the moment in regards to there cubes, but I think that a company like Dayan might be more willing to help you out due to the fact that they are a smaller company right now and they might want to get there name back out on the market. I am probably wrong, but that is just my thought
I wish you the best though with any company, and I hope that everything works out. I am exited to see the mass produced version, and am glad to see your dedication to this cube.
WombatWarrior17
Veteran
Good luck! I can't wait for the mass-produced version!
Similar threads
