Selling magnetic 3x3 and more

[jaredye]

I just had too many of them at home. After trying out so many cubes the market has to offer I've picked my main and I want to sell the rest. I'm in the US. Please pay me via paypal and create a shipping label and PM me. I can ship via USPS, Fedex and UPS.

All cubes are lubed, broken in and in prime condition. I made all the M mod myself. If not mentioned, cubes have stock stickers. I can provide pictures upon request.

Weilong GTS M (primary, with duel adjustment, cubicle full bright expect regular red, N35 4mm*2mm) $30
Gans 356 Air UM (macaroon, N35 4mm*2mm, not the official UM) $45
Yan 3 M (primary, N35 4mm*2mm) $25
Gans 356 M (black, cubicle half bright, N35 4mm*2mm) $25

Cangfeng 4x4 (stickerless) $15 -This took me more than an hour to lube properly so I think the price is justifiable. Plus a broken in Cangfeng is completely different from a new one.
Aosu 4x4 (stickerless bright) $15
Dayan 2x2 (stickerless, new plastic, with Weilong springs to prevent popping) $10
Weipo 2x2 (stickerless) $9
Yuehun 2x2 (white) $6
Aolong GT 3x3 (white, cubicle half bright) $6
Yuexiao 3x3 (one old scheme stickerless, one brown) $6
Thunderclap 2 (stickerless) $5

 

[Ghost Cuber]

Unfortunately, I don't have the money to buy one right now, but I would suggest changing the name of the Gan Air to Gan Air M, not UM. I know you are not trying to trick anyone, but UM stands for ultimate edition magnetic and the macaroon Gan Air is the Grand Master, not ultimate. I am not trying to be rude- I am just trying to avoid confusion. Thanks!

 

[jaredye]

Unfortunately, I don't have the money to buy one right now, but I would suggest changing the name of the Gan Air to Gan Air M, not UM. I know you are not trying to trick anyone, but UM stands for ultimate edition magnetic and the macaroon Gan Air is the Grand Master, not ultimate. I am not trying to be rude- I am just trying to avoid confusion. Thanks!

Thanks for your comment. I guess I see the U as a specific kind of mod, which is remove part of the corner and edge piece chassis, and glue the pieces together instead of using screws to reduce weight. That is exactly what I did. Gans just have factory people do it for you. They might have done a better job than I did, but I would say mine functions pretty well and you probably won't be able to tell the difference.

 

[allanboss131]

Thanks for your comment. I guess I see the U as a specific kind of mod, which is remove part of the corner and edge piece chassis, and glue the pieces together instead of using screws to reduce weight. That is exactly what I did. Gans just have factory people do it for you. They might have done a better job than I did, but I would say mine functions pretty well and you probably won't be able to tell the difference.

If I pm you can you explain this mod with some pictures as well? Really really intrested in trying it!

 

[jaredye]

If I pm you can you explain this mod with some pictures as well? Really really intrested in trying it!

Since I've glued the pieces together I won't be able to take it apart and show it to you. Here's a post about it (but it's in Chinese): http://tieba.baidu.com/p/4717468736?pn=1
You can look at the pictures and see how that guy modded his Air. I didn't install plastic screws because I feel it's quiet unnecessary.

 

[Ghost Cuber]

If I pm you can you explain this mod with some pictures as well? Really really intrested in trying it!

Okay thank you. I just didn't realize you did the mod.

 

[allanboss131]

Since I've glued the pieces together I won't be able to take it apart and show it to you. Here's a post about it (but it's in Chinese): http://tieba.baidu.com/p/4717468736?pn=1
You can look at the pictures and see how that guy modded his Air. I didn't install plastic screws because I feel it's quiet unnecessary.

Thanks for the response. Did you glue the outside area of the pieces or glue the inside and push them together?

 

[allanboss131]

Thanks for the response. Did you glue the outside area of the pieces or glue the inside and push them together?

Nvm I'm being stupid.

 

[allanboss131]

Since I've glued the pieces together I won't be able to take it apart and show it to you. Here's a post about it (but it's in Chinese): http://tieba.baidu.com/p/4717468736?pn=1
You can look at the pictures and see how that guy modded his Air. I didn't install plastic screws because I feel it's quiet unnecessary.

did you cut off part of the pieces too? I am attempting to make a magnetic gans 356sv2 ultimate m. Idk why but i just didn't like my 356 air as much as the 356v2, so I sold it. Do you think it will have the same effect as the air? or is it just a little unnecessary? I might just end up taking out the screws and gluing the pieces together instead of taking off part of the plastic,would that work?

 

[Travisbiro]

Weilong GTS M (primary, with duel adjustment, cubicle full bright expect regular red, N35 4mm*2mm) $30
Gans 356 Air UM (macaroon, N35 4mm*2mm, not the official UM) $45
Yan 3 M (primary, N35 4mm*2mm) $25
Gans 356 M (black, cubicle half bright, N35 4mm*2mm) $25

Can you send me pics of these 4 and maybe a couple of your craftsmanship with the mods? Thank you

Also pics of the 2 4x4's you have.
Thank you again

 

[jaredye]

Weilong GTS M

Gans AIR UM
(I can't open it since I glued the pieces together. But you can see I've removed the metal screws. And the weight (76) with lube is almost identical to the official weight (75.7), so I think I've done a good job.)

 

[jaredye]

Yan 3 M

Gans 356 M
(I forgot to mention I put Moyu core in it to reduce weight, as you can see in the picture below. It weighs 82g.)

 

[jaredye]

I don't know what I can show with the 4x4. I can only say they've been lubed and broken in. I have about 300 solves on Aosu and 500 solves on Cangfeng.

Moyu Aosu

Yumo Cangfeng

 

[Travisbiro]

What would be your best price on all of those?

 

[jaredye]

What would be your best price on all of those?

I can give you 145 if you pay for shipping.

 

[DSR cuber]

I will buy the yuexiao and the weipo for 16$ and I will pay for shipping

 

[jaredye]

I will buy the yuexiao and the weipo for 16$ and I will pay for shipping

I have a stickerless Yuexiao and a brown one. Which one do you want?

 

[jaredye]

did you cut off part of the pieces too? I am attempting to make a magnetic gans 356sv2 ultimate m. Idk why but i just didn't like my 356 air as much as the 356v2, so I sold it. Do you think it will have the same effect as the air? or is it just a little unnecessary? I might just end up taking out the screws and gluing the pieces together instead of taking off part of the plastic,would that work?

I cut off the main pillar that is connected to screws, since I no longer need screws. I didn't cut out other parts because I worry that might compromise the integrity of the structure. As you can see from my picture above, 356V2 UM would weigh about 82g if you use Moyu core instead of Gans core. The plastic I cut out probably weighs 3g so it's no big deal.

One thing for 356V2. Its plastic is quite thick. So N35 4mm*2mm is noticeable but doesn't provide a strong snatch. If you prefer stronger magnetic feeling, you should consider at least N50 4*2 or even 5*2.

 

[allanboss131]

I cut off the main pillar that is connected to screws, since I no longer need screws. I didn't cut out other parts because I worry that might compromise the integrity of the structure. As you can see from my picture above, 356V2 UM would weigh about 82g if you use Moyu core instead of Gans core. The plastic I cut out probably weighs 3g so it's no big deal.

One thing for 356V2. Its plastic is quite thick. So N35 4mm*2mm is noticeable but doesn't provide a strong snatch. If you prefer stronger magnetic feeling, you should consider at least N50 4*2 or even 5*2.

I am actually fully done with the v2um. I wanted a really light magnet feeling because I use roux and the other magnetic cubes had been a little too strong for me so I used 4x2 n48 in the corners and 4x1 n48 in the edges. The feeling is really subtle, and I really like the lightweight feel of the cube (i didn't remove any plastic, just the screws) my only problem is that I got tiny drops of superglue on some of the pieces which gives it a tad scrathy feeling. Hopefully with lubing and breaking in that feel will go away. I also kept the gans core installed. Really likeing this cube! Espically for oh!

 

[JTay]

I'm very interested in the macaroon Gans and the Yan 3. Are they still for sale? Not sure yet how to PM, so if you could message me first, that would be great!