MoYu Weilong GTS V2 Review

2-3 months, with a potential for sooner!



I'm actually a time traveler from the past, (because time dilation is easier and traveling forward in time is much easier than backwards), so time moves differently for me.

Basically, I rip off all my ideas from a different timeline. For example, in this other timeline, this guy named Humphrey came up with all these things, and I stole it and brought it back to the present. So now I pretend to be Humphrey, and time has made a full circle.

Since these are from a future timeline, there's no news about it yet, and a lot of the things I post seem really crazy.
Like, don't even get me started on the ancient aliens...
But wait! That would mean all your ideas would have already been popularized in the future by Humphrey, because they were invented in the past, as you said! You would have to utilize time dilation to go into the future (or be from the future in the first place) and then utilize some sort of wormhole to travel back. So cut the BS Chris. What's the real truth?
 
But wait! That would mean all your ideas would have already been popularized in the future by Humphrey, because they were invented in the past, as you said! You would have to utilize time dilation to go into the future (or be from the future in the first place) and then utilize some sort of wormhole to travel back. So cut the BS Chris. What's the real truth?
But he's getting them from another timeline's future, so it all works out.
 
But he's getting them from another timeline's future, so it all works out.
But that would still require travel to the past in relation to the alternate time line! It's not possible using only time dilation! I just want Chris to tell us the truth, and reveal that he actually has a wormhole generator and a stash of the world's greatest scientists throughout history in his basement. C'mon, we all know the truth.
 
Someday soon Chris is going to invent (or mod) a specialized cube for each main cubing method. And only a newb would use a Roux-designed cube for CFOP !! We are already seeing this with the washer/magnet mod for M-slices! So I'm only half joking.
 
But that would still require travel to the past in relation to the alternate time line! It's not possible using only time dilation! I just want Chris to tell us the truth, and reveal that he actually has a wormhole generator and a stash of the world's greatest scientists throughout history in his basement. C'mon, we all know the truth.
The timelines could be skewed, no reason they have to line up perfectly. He obviously accelerated into his future, then chose an alternate with a sizable lag to switch to.
 
I happen to be an electronics & mech engineer, and I did have a futuristic cube idea that I do not have the time or effort to pursue. The concept is a training cube. The problem when learning algorithms or drilling cases or situations is that we want the cube instantly 'set up' so we can execute a certain case or deal with a specific situation. This is really time consuming. My idea is for a cube with translucent white facelets. Inside each piece is an induction coil for wireless power transfer, a bluetooth transceiver, and a six colored LEDs. The white facelets act as a diffusers. The cube sits near a base which plugs into your PC or phone or is also wireless bluetooth. The base acts as the power transmission system, sending energy to the cube by inductive power transfer. Now, your PC or phone can instantly 'generate' any case or situation or scramble and the cube will INSTANTLY light up with the facelets in the correct color. You execute the algorithm or drill the case or solve the situation, then you hit a button on the app and the next case is instantly fed into the cube. Using such a method you would save incredible amounts of time and learn things three or four times faster as you would never spend any time scrambling the cube and the cases you are trying to learn would instantly appear one after another. The cube would work better in dark conditions, indeed in complete darkness it would be quite cool as the whole cube would be glowing. From a financial perspective, if built in enough volume, the cube could sell for around $99 - $149.

Imagine even doing regular solves and never needing to scramble the cube. Or practicing ZBLL or some other big set and having cases instantly appear at your fingertips, with every second of your practice time going to actually improving your skills.
 
I happen to be an electronics & mech engineer, and I did have a futuristic cube idea that I do not have the time or effort to pursue. The concept is a training cube. The problem when learning algorithms or drilling cases or situations is that we want the cube instantly 'set up' so we can execute a certain case or deal with a specific situation. This is really time consuming. My idea is for a cube with translucent white facelets. Inside each piece is an induction coil for wireless power transfer, a bluetooth transceiver, and a six colored LEDs. The white facelets act as a diffusers. The cube sits near a base which plugs into your PC or phone or is also wireless bluetooth. The base acts as the power transmission system, sending energy to the cube by inductive power transfer. Now, your PC or phone can instantly 'generate' any case or situation or scramble and the cube will INSTANTLY light up with the facelets in the correct color. You execute the algorithm or drill the case or solve the situation, then you hit a button on the app and the next case is instantly fed into the cube. Using such a method you would save incredible amounts of time and learn things three or four times faster as you would never spend any time scrambling the cube and the cases you are trying to learn would instantly appear one after another. The cube would work better in dark conditions, indeed in complete darkness it would be quite cool as the whole cube would be glowing. From a financial perspective, if built in enough volume, the cube could sell for around $99 - $149.

Imagine even doing regular solves and never needing to scramble the cube. Or practicing ZBLL or some other big set and having cases instantly appear at your fingertips, with every second of your practice time going to actually improving your skills.
You wouldn't have to get up from the solving station. Delegate presses a button and your inspection starts. I like it.
 
The timelines could be skewed, no reason they have to line up perfectly. He obviously accelerated into his future, then chose an alternate with a sizable lag to switch to.
You still can't go into alternate timelines with just time dilation! It only permits the traveling forward in your own timeline, so he would need some even more advanced technology to travel into an alternate timeline, because even wormholes only permit the warping of time and space in one's own dimensions, but according to the Many Worlds theory of quantum mechanics, that would be in its own separate universe!
 
Inside each piece is an induction coil for wireless power transfer, a bluetooth transceiver, and a six colored LEDs. The white facelets act as a diffusers. ... Now, your PC or phone can instantly 'generate' any case or situation or scramble and the cube will INSTANTLY light up with the facelets in the correct color.
How will the system know where each physical piece is? Let's say I apply a scramble sequence and now I want to instantly put the cube into solved state. How do we know which pieces to light up with which colours?
 
How will the system know where each physical piece is? Let's say I apply a scramble sequence and now I want to instantly put the cube into solved state. How do we know which pieces to light up with which colours?
You have two choices, one is to fix a single corner as a fixed color and the rest are all relative to that single one. The other better solution is to use an accelerometer, which detects the direction of gravity, so the cube always knows which side is up. If you add a digital compass then the cube also knows which side is facing you. These chips cost $1 each.
 
You have two choices, one is to fix a single corner as a fixed color and the rest are all relative to that single one. The other better solution is to use an accelerometer, which detects the direction of gravity, so the cube always knows which side is up. If you add a digital compass then the cube also knows which side is facing you. These chips cost $1 each.
But then it wouldn't be able to tell the pieces' relative positions.

For power distribution, I don't think it would be ideal to use induction, since that's big, heavy, inefficient, and causes a lot of interference that could make it so the pieces can't communicate. Maybe tracks on the feet of the pieces? So, maybe a track on the top and bottom (separately) of the corner feet and inverse tracks on the edge feet?
Then, maybe, that could double as a location tracker, because each piece could send an identifying signal to its adjacent pieces.

Actually, maybe that could eliminate the need for radios. There could be a spherical core (like the Rubik's speed cube) that has a controller and Bluetooth radio (as well as some sort of master charger implementation), and it could communicate with the edges via the centers, maybe even just through one center, and can send them signals to change their state.

The connection wouldn't need to be stable while the cube is in use, because the pieces could simply have assigned states that they stay in until instructed otherwise and you're not going to be manipulating it while it's scrambling or charging.
 
But then it wouldn't be able to tell the pieces' relative positions.
For power distribution, I don't think it would be ideal to use induction,
The connection wouldn't need to be stable while the cube is in use, because the pieces could simply have assigned states that they stay in until instructed otherwise and you're not going to be manipulating it while it's scrambling or charging.

Okay I see your point now regarding relative positions. You could flash the LED's at high frequency (beyond human visual perception) and encode the positions through the translucent casings of the pieces to tiny cheap photodiodes in each piece. This would tell each piece its relative position.

Regarding power, if you don't use induction, you could have a tiny supercapacitor in each piece, and when the cube is in the aligned position (all faces aligned) tiny metal contacts could allow the cube to be charged on a base, charging up the supercapacitors in each piece enough for a dozen solves, then place the cube back on the charger for 3 seconds to charge the capacitors again. I still think induction would be better though.

I'm sure there are solutions to every obstacle, and cheap ones too. I just haven't put that much thought into its construction, except that it would be an amazing device and you would probably sell a great many cubes; and if indeed they became standard fare for competitions (eliminating the need for human scramblers and errors), then sales would be massive.

I more saw it as a training tool, as the cube might be slightly heavier than a basic cube, but perhaps it could be competition ready as well.
 
Okay I see your point now regarding relative positions. You could flash the LED's at high frequency (beyond human visual perception) and encode the positions through the translucent casings of the pieces to tiny cheap photodiodes in each piece. This would tell each piece its relative position.

Regarding power, if you don't use induction, you could have a tiny supercapacitor in each piece, and when the cube is in the aligned position (all faces aligned) tiny metal contacts could allow the cube to be charged on a base, charging up the supercapacitors in each piece enough for a dozen solves, then place the cube back on the charger for 3 seconds to charge the capacitors again. I still think induction would be better though.

I'm sure there are solutions to every obstacle, and cheap ones too. I just haven't put that much thought into its construction, except that it would be an amazing device and you would probably sell a great many cubes; and if indeed they became standard fare for competitions (eliminating the need for human scramblers and errors), then sales would be massive.

I more saw it as a training tool, as the cube might be slightly heavier than a basic cube, but perhaps it could be competition ready as well.
Each piece should be as simple as possible. Complexity increases difficulty (to make), cost, failure/malfunction rate, weight, power draw, and various other restrictions on design. The tracks could handle power and simple per-piece communication effectively and reduce the components in each piece to a controller, battery, and set of LEDs.

I don't actually understand how induction would work at all. I'm not an expert, so I might be missing information, but I don't think it's the best choice. How would you handle power distribution throughout the cube? Which pieces, or rather which faces, would transmit power, and which ones would receive it?

We've got a little ways to go, technologically, before we could make something like that into a flagship-class speedcube. BUT, it's perfectly possible to make it work.
I'm not sure it would really be possible to do it in something ~56mm like the Air, GTS, or Valk without a team of the sort of engineers who make smartphones and whatnot, but in something like the Big Sail's form-factor it should be achievable.

EDIT: Sorry if I seem a little energetic or abrasive, I'm just working out how this would work as well. It's a really cool concept.
 
and also please give chris tran a rubiks brand and tell him to make it into a good speedcube and then you can make a video reviewing it

You're asking Chris Tran to give Chris Tran a Rubik's brand and tell Chris Tran to make it into a good speedcube and then Chris Tran can make a video reviewing it.
 
hi,
So today I received my gts 2 in stickerless. Will upload unboxing if I have time.
I will get into basics. The feel is a mix of gts v1 and valk, really smooth and some resistance. It also feels quite papery but this is a common trait for moyu stickerless cubes. Really good, very uncontrollable so i slowed it down with lube (traxxas 50k, i think i put a tiny bit too much so it feels a little gummy), also i put in gts v1 springs, i might try original weilong soon. Corner cutting isn't as good as I'd like it to be, it can cut 45 but it's a downgrade from the original. Much more stable than the original but unstable relative to the valk. When I disassembled it the corners looked like a mix of valk and gts v1. And the edges were pretty much the same as the original gts but with added wings for stability. i will be putting some n50 4x2mm into it, if i can find a place that sells n42 i will get those. At this point in time it's not guaranteed to be my main but it has a very high chance.
 
Back
Top