3x2 is way too weak, 4x1.5 is a bit weaker than 4x2, 5x1.5 is a bit stronger than 4x2.
N35 4x2mm
Exactly what I decided about an hour or so ago
Will be doing that tonight I reckon.
4x2mm N35 throughout, mine works well. The magnets are nice and snappy for the inner layers. You many want to go for a bit weaker ones for the inner layers but not really weak.
So would n35 4x2mm be good for the outer layer then n35 3x2mm be good for the inner layer?
That's exactly what I went with. IMO the inner layers don't need to be as snappy as the outer layers and it holds it's shape nicely with the 3x2's on the edges
That is maybe too weak, i would go with N50 3x2 for inner layer. I experimented and I believe 30% stronger outer layer is a good combination. Also when I used original springs it all felt quite strong. After putting in thunderclap springs everything became softer and overall better.
But when moving an inner layer you have much more friction and resistance than a single side, as it is between 2 sides
Yes, exactly what I was trying to state.
I've not experienced that with the 4x4 and 5x5 magnetic conversions that I've done. I've gone with the same setup for 4 and 5 .... N35 4x2 in the corners and N38 3x2 in the edges. The inner layers have additional resistance which seems to prevent that from happening.
