Gans 356 v2!

hamfaceman

hamfaceman

Regular
Joined
Aug 9, 2015
Messages
218
Location
Melbourne, Australia
WCA ID
2015MONC01
So I just found this on speedcube.com.au. Looks rather similar to the original to be honest. From what I can see, the main difference is that the grooves in the pieces are more shallow, making it more stable.
It's great to see Gans responding to customer complaints, as the main problem that many people had with the original was its instability.

image.jpeg

Here is a link to the page where it is being sold.

http://www.speedcube.com.au/collections/whats-new/products/ganspuzzle-gan356-gans-356-master-black-speed-cube
 
hamfaceman said:
So I just found this on speedcube.com.au. Looks rather similar to the original to be honest. From what I can see, the main difference is that the grooves in the pieces are more shallow, making it more stable.
It's great to see Gans responding to customer complaints, as the main problem that many people had with the original was its instability.

View attachment 5733

Here is a link to the page where it is being sold.

http://www.speedcube.com.au/collections/whats-new/products/ganspuzzle-gan356-gans-356-master-black-speed-cube
Click to expand...

It's the Gans 356 Advanced edition, which has a smoother piece,brighter sticker and a gold Gan logo

See: http://zcube.hk/GAN356S , scroll down the page, it says that it's not a v2
 
hamfaceman said:
I suppose puzzles can have differing names between different stores. They look like they're the same. How long has that been there?
Click to expand...

Around 4-5 days I think, but the name of the link says Gans 356S, I think it's Gans 356S Advanced/Master Edition. In the past speedcube.com.au were selling the Gans 356 Advanced/Master Edition. Not sure tho
 
nightcuber said:
It's the Gans 356 Advanced edition, which has a smoother piece,brighter sticker and a gold Gan logo
See: http://zcube.hk/GAN356S , scroll down the page, it says that it's not a v2
Click to expand...

The other key difference is the shallower groove design which you will be able to verify once you compare the cubes side by side. The photo on zcube.hk was lifted from our store - the irony is that that Photo included in our listing and edited by Zcube.hk was sent to me directly by GAN to explain the difference and so I would be interested to hear what he thinks about the contradiction... Our chronology for design and aesthetic changes are:
* Ganspuzzle 356 release - shipped in GAN BOX v1 and released with classic ganspuzzle logo.
** GAN356s release (release with center cap modification (2) new GAN logo in Silver incorporated - note this is different scenario to customers who could / can still buy the center caps separately for their original 356)
*** GAN356s v2 release (shallow groove design (2) Gan Box V2 and (3) new GAN Gold Logo)
These versions were all checked with Gan prior to release on our store.
 
Sajwo said:
Which fast cubers are using this cubes except Faz and Michał?
Click to expand...
Alexandre Carlier
Brandon Huang
Dmitry Dobrjakov
Gabriel Dechichi Barbar
Giovanni Contardi
Kabyanil Talukdar
Kaijun Lin
Kirt Protacio
Nathan Dwyer
Nicola Barbaro
Pedro Henrique Da Silva Roque
Rami Sbahi
Sei Sugama
Shane Grogan
Wong Kin Lok
 
Is it actually better than 356?
I got one and it's worse than my modded 356, but I could switch caps at least..
Or maybe I modded it superwell
 
Kudz said:
Is it actually better than 356?
I got one and it's worse than my modded 356, but I could switch caps at least..
Or maybe I modded it superwell
Click to expand...

Same here, I had two gan356 before, both are super smooth out of the box.
Then I got 356s, it's way worse than v1:(

This cube is stable, but tight and hard to turn, no matter how I adjust the tension or lubracate it, or change spring sets, it still requires huge effort to trigger turning.
I had like 500+ solves, still the same.
Can say it is smooth, but completely different feel, probably the shallower groove makes it sticky.
 
Last edited:
It could be becauae of the corners. You know how everyone pulled the corner out to prevent catching? I think that also decreased the amount of friction on the pieces which is why it's much faster compared to the Gans 356s, very few people will bother to pull out the corners as the center caps already prevents most catching issues.
 
I am using a 356 v1 since the summer. Never modded it only loosened a bit of the corners. I have the new caps now for 2 weeks and I don't think it changes that much to the performance. However, in competition I never felt really comfortable with it. Always swapping with a tanglong or aolongv2. Hope to see that the new centers caps will make a difference when I am under pressure.
 
TCG said:
It could be becauae of the corners. You know how everyone pulled the corner out to prevent catching? I think that also decreased the amount of friction on the pieces which is why it's much faster compared to the Gans 356s, very few people will bother to pull out the corners as the center caps already prevents most catching issues.
Click to expand...

Okay I've tried pulling out the corner, no difference.
Also lubricated it again and tried s9 spring sets, which is the one with lowest tension, didn't help either.
The feeling of the friction is just not right compared with V1.
Now I accept maybe V2 is just not my personal style.
 
You must log in or register to reply here.

Similar threads

J
Gan 356 M vs yuxin little magic
Replies
11
Views
3,135
EngiNerdBrian
EngiNerdBrian
W
Is a GTS3M better than a GANS 356 air sm?
Replies
6
Views
2,226
weatherman223
weatherman223
Gx Cuber
Gans 356 Air master edition, GET IT
Replies
1
Views
877
THERAGINGCYCLOPS
T
D
Lubricating my Gans 356 Air Um
Replies
4
Views
1,699
GenTheSnail
GenTheSnail
D
Looking for a White or Primary Gans 356 Air SM
Replies
0
Views
665
David Phan
D
Back
Top