Your thoughts on ShuangRen

Do you think the ShuangRen will replace your main

  • Yes, it allready better than my main

    Votes: 36 31.3%
  • No, my current main is much better.

    Votes: 26 22.6%
  • I don't know yet

    Votes: 53 46.1%

  • Total voters
    115
It's a good cube but I don't like it very much. I've had to slow down most of my algorithms to avoid catches. Of course, that's because of how I turn the cube, but I've never had to purposely slow down my turning to accommodate a cube before. It's almost as if the cube is holding me back.

Strange how that varies between cubers. I feel like this cube eats any algorithms I feed it at any speed. The only problem is that I'm not accurate or fast enough for this cube.
 
Strange how that varies between cubers. I feel like this cube eats any algorithms I feed it at any speed. The only problem is that I'm not accurate or fast enough for this cube.

Yeah. Some people faster than me have had no issues with algorithms either. I probably just have bad turning.
 
It's a great cube with some problems. Got a DIY kit. No flashing except the parts which are inside the piece, so I didn't file those down. Threading the core was actually much harder than I thought. Not sure if it's just this core, because a DIY ZhanChi I assembled for a friend was super easy to thread. Might be getting a c4u core, I'll see. The screws are actually very tough to screw in and strip somewhat easily. This also makes center caps much harder to put on because the screws don't like to go in any further. Center caps are very hard to pull off once on. No lube, moves extremely fast. Great corner cutting and flow. Hands down better than my ZhanChi. If the core, screws, and center caps were better, this would be the best cube ever.
 
It's a good cube but I don't like it very much. I've had to slow down most of my algorithms to avoid catches. Of course, that's because of how I turn the cube, but I've never had to purposely slow down my turning to accommodate a cube before. It's almost as if the cube is holding me back.
I wonder if I will slow down my algorithms :)




I am changing my opinion on the Fangshi. I do Ao12's changing between Fangshi and any other Dayan that I have and every time I get better results with the Fangshi. Some how after using Fangshi I lock up using even the most broken in Zhanchi. The Fangshi has a complete own league in 'not locking up'. And it's getting more and more quiet. I think I will start using it as my main and use it on the next competition in two weeks.
I'm pretty sure someone said that if you do 100 solves on the Fangshi the flash will go away. I'm not gonna switch mains until I do 200 when I get mine :)
 
Last edited:
but I've never had to purposely slow down my turning to accommodate a cube before. It's almost as if the cube is holding me back.

Do the averages on your Fangshi have true worse times compared to your other cubes?

..3 1/2 drops of maru lube and this cube is too fast for me. It does a U2 with one flick..

That is strange. Mine will never ever overshoot. That is also why my algs work better. I am not an accurate turner. I will try a bit Maru tonight to see if I can speed the cube up a bit. Mine is now completely without lube on the pieces.

I'm pretty sure someone said that if you do 100 solves on the Fangshi the flash will go away.

I have done a timed Ao100 on the Fangsi yesterday. I had good times (sub 28). I have done over 500 solves on the Fangshi so far. It's getting better and better. ;)
 
Last edited:
Do the averages on your Fangshi have true worse times compared to your other cubes?

I have done about 1,050 solves on the FangShi. My times are consistently slower than on my main. Low 11 on main vs 13 on FangShi. 2 seconds is fairly significant.

It seems like my good times on the FS are extraordinary while my bad times are around 16 or 17 causing averages to be generally bad.

Video review will be uploaded later.
 
I've had the cube now for a few days and I think I like it. But I'm still not sure if I like it more than other cubes.
I think it turns very well and feels good, but if I then switch to a Zhanchi for example, I like the feel of the Zhanchi better.

I've now used mainly the ShuangRen in the past days and just broke my avg of 5 PB with it (27.915 [27.935, 28.372, 27.440, (29.101), (27.388)]) so I think I'm kind of used to it now.


I think that most of us are slightly dissapointet because of the high expectations. However, I don't think that there will ever be a cube which magically drops our times by seconds.
 
Over the year that I have been cubing I have tried a LOT of brands and I keep coming back to the Zhanchi. Just recently I got a guhong v2 that is very nice, but other than that there isn't really a cube that comes close to my main. am NOT talking time wise, I am talking feel wise. You get used to a certain feel and it kind of like a nice pair of shoes that you have had for a while. They're comfy hehe.

Good thing shoes wear faster than cubes do!
 
I'm a little bit disappointed of this cube. I tried my zhanchi after a few averages with the Fanghsi, and I have to say it's way better. 10k diff oil made the Fangshi better for my liking, but still not even close to the zhanchi. Should I just break it in more?
 
What you SHOULD do is find out for yourself what you like best. I have given it a shot, and nope.. sticking to my zhanchi as my main and cubing along with that. It is fun to have in the collection though :)
 
Funny, I've held off from getting a fangshi to wait for feedback, rather than buying in to the hype, but in many ways it's made no difference whatsoever!

I started (speed)cubing with a guhong 2, which was great, but my PLLs were slow. I got a white zhanchi, which makes my PLLs faster, but f2l slower (not a fan of white-on-white). That said, my fastest times with both are similar.

Couldn't decide of I should get a black zhanchi or a fangshi...

I'm now, after patiently reading all your comments, waiting on an order of a black zhanchi AND black fangshi!

At the end of the day, as has been said a million times in this thread and elsewhere, it's all down to personal preference. I intend to do averages of 100 with both my new cubes, and see if there's any difference to my current main (modded white zhanchi). I don't imagine there will be any massive difference, but who knows?!

IMHO peoples cubing styles differ so greatly that no one cube will ever satisfy everyone. With different lube, hardware, and tensions, the same cube could be made completely different.

Comparing a zhanchi that you've done 10k solves on with an out-of-the-box cube will never give a fair comparison, the only way we'll see if the fangshi lives up to the hype, in the long run, is by seeing how many people are still using one in 6 months or a year.

I think it would be interesting to do a poll, maybe later in the year, to see how many converts there are, and how many people have stuck with the zhanchi.
 
Comparing a zhanchi that you've done 10k solves on with an out-of-the-box cube will never give a fair comparison, the only way we'll see if the fangshi lives up to the hype, in the long run, is by seeing how many people are still using one in 6 months or a year.

I think it would be interesting to do a poll, maybe later in the year, to see how many converts there are, and how many people have stuck with the zhanchi.

I couldn't agree more than what I do.

Maybe the poll should contain the MoYu aswell?
 
Comparing a zhanchi that you've done 10k solves on with an out-of-the-box cube will never give a fair comparison
There is always the exception: the milky zhanchi felt JUST like my main, if not better, out of the box. It DOES happen, but it is rare. Both ARE zhanchis though, but still.. the main has been used for a year now, and the milky was new. I have had many zhanchis in the mean time, none are like it, and only the purple I purchased recently came close.

MarcelP had a similar experience with his milky.
 
Has anyone tried Maru Lube on this yet??
I added a few drops last night, and had to remove it again, since it made the cube a lot slower ...
 
Back
Top