Dayan 6: PanShi [pictures]

I got two. The corners came already assembled. I split them apart and glued them together. On the first, I left the torpedoes in.

It's very tight. To assemble it, I removed one screw completely (some big cubes are best assembled this way, the last thing you do is screw in a center).

The thing feels blocky sort of. I think this comes from edge pieces hitting edge pieces. It could be eliminated by sanding.

The springs seem too long. That is, if I loosen the screws enough to let it turn easily, it obviously going to pop like mad. So I'm going to use a Dremel cutoff wheel to take some length off the springs tonight, maybe.
 
I got two. The corners came already assembled. I split them apart and glued them together. On the first, I left the torpedoes in.

It's very tight. To assemble it, I removed one screw completely (some big cubes are best assembled this way, the last thing you do is screw in a center).

The thing feels blocky sort of. I think this comes from edge pieces hitting edge pieces. It could be eliminated by sanding.

The springs seem too long. That is, if I loosen the screws enough to let it turn easily, it obviously going to pop like mad. So I'm going to use a Dremel cutoff wheel to take some length off the springs tonight, maybe.

For me the the springs are good rarely pops.
 
For me the the springs are good rarely pops.

Okay, after doing some solves, it doesn't pop.

Then I removed the torpedoes, somewhat better.

I still think it's too loose feeling and I'll do better with it by shortening the springs.

To get an idea for what shortened springs feel like, try removing the spring from u and r and see how it feels on the sexy move. Short springs tend to be a little like that but with slightly better corner cutting.

What I'd really like are "loose springs", that is, springs of the usual length but with a smaller spring constant. Then I could have good corner cutting and easy turning.

[edit]Okay it feels better with shortened screws. One of my students is considerably faster than me. I'll bring in the cubes for him to look at on Wednesday.[/edit]
 
Last edited:
For crying out loud, I ordered my stickerless one on February 24 and it still did not arrive. I received a mail that there's a problem at the factory and that they're trying to make the plastic perfect. *sigh*
 
Last edited:
Sticker less haven't even been sent out yet,

Yeah, there seems to be a problem at the factory. I've been waiting for 37 days. That's a long time to wait. I'm just going to ask for a refund and buy a regular one at zcube and some stickers at CubeSmith.
 
Yeah, there seems to be a problem at the factory. I've been waiting for 37 days. That's a long time to wait. I'm just going to ask for a refund and buy a regular one at zcube and some stickers at CubeSmith.

It was a preorder with no clear release date. If you're impatient, then pre-ordering something that wasn't even in production at the time probably isn't the way to go.
 
Oh btw, I have like 15+ Zhanchi's and one Panshi and still I choose my Panshi in competition. My experience with the Panshi is that is is more forgiving in bad turning (like I do) and overshooting almost never happens.. It's a pretty perfect cube. I hope my PuzzleAddictions pre-lubed, pre-stickered will come some day.. (waiting waaaay too long now).
 
How did you lube your Panshi?
I've also ordered a pre-lubed, pre-stickered from PuzzleAddictions and looking forward to compare those.

I first did about 500 solves without lube to brake it in. ThenI did lube it with silicone spray. And on top of that I added a few drops (1 drop per face) Maru lube. Works like charm. Is your PuzzleAddiction order also a per-ordered one? My status of shipment is Jamaica (place in New York) since March 10th...

Mine's better now it's been broken in a bit, but locks every time when pushing with thumb for F'R. Anyone else have that problem?
No, But I only use thumb in last move of T-perm.. And that is one of my best pll's ;) So I don't think my cube has that problem. Btw, I modded the cube before using it. Did the inside of the corner 'feet' smoothing with sand paper. And glued the corner pieces with 'seconds-glue' .
 
My corners are glued, but no sanding. Actually it feels like bigger pieces catching, like corner against center, but inside. I'll fiddle with the tensions and see what happens.
 
Is your PuzzleAddiction order also a per-ordered one? My status of shipment is Jamaica (place in New York) since March 10th...

Yes, I preordered it. It was shipped on March 28th and the last state is 'First-Class Package International Service, Processed at USPS Origin Sort Facility, LOS ANGELES, CA 90009, International Letter' from 31th March.
 
Okay, my PanShi came in and I did hundreds of solves with it. It went a little like this; 10 solves, mess with the screw, 10 solves, mess with the screws, 10 solves, mess with the screws. My conclusion? This cube is crap, and that's the nice way to put it.

Comparison between a Zhanchi and a PanShi:

Ao12 with a Zhanchi:
24.61, 25.12, 25.09, 21.30, (16.26), 18.78, (26.71), 22.50, 21.22, 23.87, 24.08, 19.49 = 22.61

Ao12 with a PanShi:
25.11, 27.41, 26.83, 25.43, (28.29), 22.21, 25.86, 23.36, 22.29, (17.60), 22.03, 23.49 = 24.40

No matter what I do, I can't get it to feel right. I tried it rock-solid and super loose and everything in between but all to no avail. Throughout the hundreds of solves I did, the cube kept on getting on my nerves. It felt the same way my ZhanChi feels like when it hasn't been lubed for 3 months and tons of dust found its way in.

Anyway, the PanShi is good for one thing though; if you're getting bad times with your GuHong or ZhanChi or any other good cube but still blame the cube for it, then do a couple of solves with a PanShi. Then take your previous cube again and you'll immediately think your cube wasn't really that bad and that it's actually godly. But seriously... people who did not yet buy the PanShi but are thinking about doing so; buy a GuHong or a ZhanChi instead. This is just a waste of money.

I should also mention that this cube comes from Lubix, which means that it has been already lubed AND modded. So the thought of an unmodded PanShi actually makes me cringe. Really, the only good thing that I noticed about the PanShi is that it will NEVER pop. Even when I set it super loose and performed moves in a certain way that would make my ZhanChi very upset, the PanShi did not give a single damn.

As an avid fan of both the GuHong and the ZhanChi, I was convinced that DaYan could not produce bad cubes. I was sure that the PanShi would be the new king of the cubes. But alas... one illusion less, one experience richer. I'll just put it next to my old ShengEn F-II and Rubik's cube, so they can have a dust-eating contest together.

edit: Alright, day 2 with the PanShi. I figured it'd just be a waste of money to ditch it right away so I'm in the process of removing the torpedoes and see what that'll do.
 
Last edited:
I was disappointed and critical of my Panshi when I first got it. But after some breaking in, it is a much better cube. Now I prefer it to my Guhong 2, although Zhanchi still wins.
 
Back
Top