Wittwo won't work

*laughs*

I did the most work to my 4x4 mf8/dayan which involved getting rid of catching and all that stuff and improving corner cutting. Other cubes that I heard take a while are the shengshou 4x4 konsta mod and florian, and good thing is there are stickers available that match the modded pieces.


Also.. why not get a cheap.. say.. 3x3 or 4x4 and make a shapemod yourself? :)
 
Non-even turning is easily sorted by tensioning properly.

The grinding is something you have to take for granted, or you can do what I did, which is take the entire thing apart, glue the inner two halves of those edgelike pieces together so they become one piece like in the witwo v2, and sand them smooth, and take all the little mold thingies off as well.

Grinding will not go away just on its own or by lubing.

(ok well yeah.. maybe after 1000 solves or something)
Hi could you possibly write up what you did to your V1? I don't know which pieces you glued and sanded. Was it the 12 pieces that surround the corners (3 of which lock to the core)?
 
http://www.zcube.cn/index.php?route=product/product&product_id=100

Take a look there, then http://www.zcube.cn/image/data/TC/TC-WitTwo1-5.JPG

Those pieces were glued and sanded all around so all the sides where the two pieces meet feel as one.

Could be I also glued and sanded these: http://www.zcube.cn/image/data/TC/TC-WitTwo1-7.JPG (top left) so they are all smooth as well. Can't remember though if I did that or not.. but I think so.

Also took off all the burrs for any and all pieces that are there.

Hope that helps :)
 
http://www.zcube.cn/index.php?route=product/product&product_id=100

Take a look there, then http://www.zcube.cn/image/data/TC/TC-WitTwo1-5.JPG

Those pieces were glued and sanded all around so all the sides where the two pieces meet feel as one.

Could be I also glued and sanded these: http://www.zcube.cn/image/data/TC/TC-WitTwo1-7.JPG (top left) so they are all smooth as well. Can't remember though if I did that or not.. but I think so.

Also took off all the burrs for any and all pieces that are there.

Hope that helps :)
Great, thanks. I have my v1 apart and that 'gap' between the two pieces of those edges are exactly what rubs against the gaps in the gaps in the 3 piece corner to make all the noise. It's almost like you need to glue and epoxy the gaps and then sand so the sides of those pieces are smooth. Is this what you did more or less?
 
I simply glued the pieces together by applying a drop of glue on the parts that connect on the inside.

No glue in the seams or anywhere else where I could glue my fingers onto it hehe. Just the plain basic parts where they slide in each other. The rest was sanding.
 
How did you get it apart? Mine has been lying unused waiting for me to find time to mod it :). Did you find a solution to the faces of the corners squashing inwards?
 
Back
Top