black diy cube ii, or a2, watever u call it...

amostay2004

Legend
Joined
Jul 27, 2008
Messages
2,788
Location
Malaysia
WCA ID
2009SWEE01
YouTube
Visit Channel
hi guys..

im new to this forum..
anyway..i have a collection of cubes..and despite bad reviews about it..i seem to like my black diy cube a2 a lot more than the rest (even my white d type with type a core)..for some reason it locks up very little and it cuts corners very smoothly..the oni downside is that it's noisy due to the new design...and doesnt turn very fast bcos of that too...

the thing is i can get around 25-26secs average with tat cube and probably around 28-30secs averages with my white d type with type a core..
i dunno...is it because my skills are different?
my white d with a core cube seems to lock up a lot when i use it..it's like the pieces collide with each other when im turning or something...

but tat may be just me..

wat do u guys think of the a2 cube? there doesnt seem to be much talk about it...
 
What is your tension on your Type D cube? It usually cuts corners better when it's tight. When it's lose it locks up a lot.

And are you using the new or old Type A core? The old one works better.

Have you tried other cubes besides the Type A II and the White Type D with Type A core?
 
What is your tension on your Type D cube? It usually cuts corners better when it's tight. When it's lose it locks up a lot.

Really? I just ordered one, so should I adjusted it so that the screw is all the way in?
With an old Type A core, it's your choice. But don't have it too lose. Most people like it on the tighter side.

With the original Type D core, yes. Otherwise your cube is going to pop a lot. Even at the tightest tension you still see like 4mm of the screw when you pull on it because you can't get screws into the Type D core very far.
 
hi guys..

im new to this forum..
anyway..i have a collection of cubes..and despite bad reviews about it..i seem to like my black diy cube a2 a lot more than the rest (even my white d type with type a core)..for some reason it locks up very little and it cuts corners very smoothly..the oni downside is that it's noisy due to the new design...and doesnt turn very fast bcos of that too...

the thing is i can get around 25-26secs average with tat cube and probably around 28-30secs averages with my white d type with type a core..
i dunno...is it because my skills are different?
my white d with a core cube seems to lock up a lot when i use it..it's like the pieces collide with each other when im turning or something...

but tat may be just me..

wat do u guys think of the a2 cube? there doesnt seem to be much talk about it...


Ugh, it annoys me when people type like that.

I wish proper spelling was part of the requirements of the forum.
 
Seriously I had no idea what he was talking about its sooo hard to read. (sarcasm)

anyway I ordered an A2 or whatever but it didn't come I got an old type A instead. Lame. But I might get one sent to me. I hope it is as good as yours.
 
Sorry guys, it's kind of a Malaysian habit to type like that...haha.
I'll try to improve my posting skills from now on...lol.

Anyway, despite saying that my cube with the fastest time is the A2, I dun really like the cube..it just feels flimsy..just not the right feeling..haha.

as for my cube tension on the white D with A core..I wouldnt say it's that tight, I'll try to tighten it after this post and see how it goes..

anyone else with an A2 willing to share their experience?
 
hmm..just tested the white D with A core with a tighter tension, still dont like it though. Sometimes i think it's actually because I do a lot of regrips when solving the cube, and it's like when i regrip the cube, the layers get misaligned slightly..thus causing the lock-ups. That's why i think maybe it's the problem of my skills..heh.

Oh and to Rubik's Cube Fan, I have a third model white diy type A with a pretty screwed up core. where the screws keep coming off. I did repair it by putting super glue on the tip of the screws..but i took the screws off to make another combo cube and...it's a long story..

i also have an old type black diy..in which the core was used to make my white D with A core..and a red type D which i dun really like...

so my A2 and my White D with A core are my 2 favourites right now =)
 
crasyasianskills, i did the reverse. Trust me, the old type A is leagues better than the A II. its really crap. the core is of such low quality... the pieces have to be sanded down before you can do ANYTHING without locking up, and it has to be loosened to ridiculous amounts before it stops locking... and then it pops relatively easily. you're a lucky, lucky person ;)
 
Sorry guys, it's kind of a Malaysian habit to type like that...haha.
I'll try to improve my posting skills from now on...lol.

Anyway, despite saying that my cube with the fastest time is the A2, I dun really like the cube..it just feels flimsy..just not the right feeling..haha.

as for my cube tension on the white D with A core..I wouldnt say it's that tight, I'll try to tighten it after this post and see how it goes..

anyone else with an A2 willing to share their experience?

I bought a black DIY type II and the moment I assembled it, I realised it was the worst cube I had ever played with. It doesn't turn.. I can't even do a R U R' normally. So I adjusted the tension, tighter, tighter, tighter and it only became worse. It's the stupid ring shaped plastic thing that locks the cube up. It's just an awful cube. Never buy it. Never. ever.. ever..!!!

The only useful thing is the A core (which cube4you doesn't sell seperately, for some reason) So I made a combo cube with some D type cubies.
 
i actually can understand why people are saying the cube's no good..but the thing is i just seem to solve that cube the fastest!

the thing is the way it locks up..it doesnt stop my flow of movements..but when i use other cubes..it locks up longer..i dunno how to find a better way to describe it lol

the disadvantage of this cube is..it sucks for M movements and for OH cubing..thought i dun really do OH solves..cos the turnings are really not smooth

and i think..this cube is not good for real fast cubers..as the smoothness really affects their speed..but for me..i lose a lot of speed due to lock ups..so this cube is really good for me..

i guess i need to start training on my white D with A core to advance further though =p
 
crasyasianskills, i did the reverse. Trust me, the old type A is leagues better than the A II. its really crap. the core is of such low quality... the pieces have to be sanded down before you can do ANYTHING without locking up, and it has to be loosened to ridiculous amounts before it stops locking... and then it pops relatively easily. you're a lucky, lucky person ;)

The thing is though my old type A sucks and I already have one anyway. I'd rather try the cube and then if it still sucks after awhile try and make some combo cubes or something.
 
Yeah they vary A LOT. I have the crappiest two type a's, and I have a really nice type a (all three old type). My friend has a pretty nice one also, it moves a bit slower than mine, but locks up a lot less and pops a lot less. I also have an A2, and it isn't so bad as what they've said on this forum. It's like the opposite of my nice type a. My type a turns really smooth, but not easily. It feels really solid when it turns - whereas the A2 feels like it's gonna fall apart on the simplest turns. It's also really loud. But - it moves VERY easily. The biggest problem with it isn't the cutting corners - it is like it gets caught on something in the middle of regular turns. I dunno. I prefer my type a personally, but I sometimes use the A2 when my hands get tired xD
 
Back
Top