Will you pay 60 dollars for the CamCuber Zhanchi?

Will You be willing to pay 60 dollars for Camcubers Zhanchi?

  • Yes

    Votes: 7 4.1%
  • No

    Votes: 158 92.9%
  • Depends on several reviews

    Votes: 5 2.9%

  • Total voters
    170
Status
Not open for further replies.
We have to pay 60 dollars for a cube because camcuber have to do chores at home and he doesn't really have time to assemble cubes. We dont care.
.
This is exactly the feeling I got as soon as I read his response. Camcuber, you can't use issues of time constraints originating from your private life as an excuse as to why something in your business is more expensive. Leave your **** at the door when you go to work.

What makes your cube so different from any other on the market anyway? This "lubing" is merely mentioned. If you want to gain some confidence from your potential maket you're gonna have to be a bit more open.
 
No. Buy a $14 zhan-chi and mod it yourself. It will take a short amount of time, but you bond with it because you made it. Only you can adjust it fully to how you like. After each edge mod, you take a feel of it and decide what you want to do from there.
 
Wouldn't it save him time to get an unassembled DIY kit and then sticker it directly without having to remove old stickers? Surely assembling a cube is faster than removing stickers and goop... or is there an obvious reason camcuber isn't doing this?
 
lol the poll response is a pretty overwhelming no. However, if I was camcuber, I'd still produce it and sell it for 60. It would be worth it just for the two suckers in this thread....and if they both write positive reviews, you might be able to get sucker #3 to follow suit.
 
if I was camcuber, I'd still produce it and sell it for 60. It would be worth it just for the two suckers in this thread

If they're serious, they truly are suckers. Note that apparently ...

I have also lowered the price to $29.99
Lol at poll results. 49:0

... they said they'd be willing to pay 60 after the price had dropped to 30.

If I was desperate for business wouldn't the price be lower? I have lowered it now

lol
 
Yeah, it's fine to mark something up for time spent but close to $50 for 1 hours work? That's a hellava wage you'd be earning.

I'm not even earning $50/hour and my job requires a college degree and specialized education. Stickering/modding a cube should be comparable to minimum wage work. Hell, the assembly of complex electronic equipment is worth less than that.

Side note: I remember the days when assembling, lubing and modding your own cube was a rite of passage for cubers. Like a Jedi having to build his own lightsaber to complete his training.

But what bothers me most is not the price itself but this special lubing/tensioning method that is apparently worth so much. If it's so good, why not share it with the community? We've always been open about the exchange of ideas. That's the whole point of this forum, and without it our community would never have grown at the rate it has. Is this going to change? How would you feel if you had to pay $50 to learn about a new method or access a certain set of algorithms?
 
Last edited:
I see where a lot of people are coming from but the way i look at it is, Cameron has every right to value his time at whatever price he wants, If he doesnt want to sell heaps (due to it taking a lot of time to make) then he can make the price higher and whoever is willing to pay will. Hes not strapping anyone down and demanding they buy his cube, He's offering his favourite cube the way he likes it, for the price he wants to sell it for, for those that want to buy it. So if you dont want to buy it............ummmmmm, Dont buy it! If its better than an Elite ( which it may very well be) then its worth anything under 100 dollars. And dont get me wrong I dont just spend my money without thinking about it especially when it comes to cubes and I havent bought one of these as of now. But I sure as hell dont have a problem with Cameron naming his price and offering yet another product that otherwise wouldnt exist.
 
So there's nothing special about this stickering/lubing/modding, he's just trying to separate fools from their money. Got it.
 
There isnt anything special about the stickering, there is something different about the stickers (Cubesmith) however and I personally prefer buying stickered cubes thats for sure. There obviously is something special about the lubing/working in otherwise it would feel like a normal ZhanChi which I would assume was quite obvious and he quite clearly stated that there is no piece mod and no he isnt trying to "seperate fools from their money" he is naming a price that allows him to not have to make or sell too many as he doesnt have the time which he has also quite clearly stated. If he made them all twenty dollars he wouldnt be able to keep up with demand, so he's named a price that suits his pace in terms of supply and demand. Not that hard to understand really.
 
So just to make sure I get all of this, Cameron is selling a 13 dollar cube for 30 because he restickered it, lubed it, and he "Doesn't have a lot of free time." That's completely logical.

btw You can get a fully lubed and tensioned zhanchi for 16$ on the cubicle.
 
So just to make sure I get all of this, Cameron is selling a 13 dollar cube for 30 because he restickered it, lubed it, and he "Doesn't have a lot of free time." That's completely logical.

btw You can get a fully lubed and tensioned zhanchi for 16$ on the cubicle.
it is a little expensive for a three by three. also he hasn't revealed his technique so u have no idea how it compares
 
btw You can get a fully lubed and tensioned zhanchi for 16$ on the cubicle.

Then get that lol, whats wrong with Cameron naming his price? He's already sold some so quite obviously someone likes the feel of his ZhanChi over the normal, and thats their choice, its also their choice to buy it. If it felt heaps good and I couldnt get that result anywhere else, I'd consider buying it too. If it felt the same as any ZhanChi then I obviously wouldnt, wait for the reviews and see. Cameron has made a cube that a credible number of people agree feels like no other ZhanChi, so I think Cameron has every right to name his price and if people dont want it, Just dont freaking buy It!!
 
Yes, Cameron has every right to name his price. And I have every right to express the opinion that it's only for people with more money than sense. You're the one who made the forum thread/poll about it.
 
Last edited:
it is a little expensive for a three by three. also he hasn't revealed his technique so u have no idea how it compares
There are only so many ways to lube a cube, I highly doubt he truly has a new technique. :/
@TomWood So basically your telling me to stop stating my opinon...
 
Last edited:
No I get your guys opinion and although it doesnt seem like it I half agree, I definitely have no problem with anyone stating their opinion at all and i am sorry if I came off like that :) I did start this thread because I thought myself 60 was steep, I still think it is but I also think each to their own (i.e if people want to buy it good on them) I understand your opinion and quite clearly from the poll, youre not alone in your opinion :)
 
No. Hell, I just spent a little over $60 on just 2 pairs of jeans alone. Even with the price mark down, my money can be spent in better use.
I fail to see what's so special about his technique and I hope Cameron reveals such information because it could in fact, be special. However, I'm perfectly content with a $13 cube that I take the time to lube and break in myself.

I'm not knocking Cameron for wanting to sell it though. If he truly believes there are people willing to fork out that kind of cash and those people do so, then good for him. I, as well as many others just aren't willing to pay for a service that one can do on their own for free.
 
Status
Not open for further replies.
Back
Top